...
This section is very specific to the hardware used. While this is not a general recipe, it may be useful for inspiration of what to try. The MacBook Air has no built-in Ethernet, only wireless. Unfortunately, the default installation of many Linux distributions don't have the correct wireless driver, so the user is left with no way to connect to the network after installation. I was unable to get an Apple The Apple Thunderbolt Ethernet adapter to did not work, but a Linksys USB adapter (model USB3GIGV1) was recognized. Thus, I could use Ethernet was used to install OS updates and download wireless drivers.
To install wireless drivers, you need to know which chipset is being used. In my this example case, it was a Broadcom BCM4360 802.11ac adapter. This page on Broadcom Wifi on Ubuntu provided some useful documentation. The "lspci" will display information about the PCI bus.
...
CLAM AV is an open source antivirus engine. This page gives the following instructions for Ubuntu as well as other distributions. I installed In this case, clamav and clamav-daemon . I have added the necessary "sudo" statements to the recipewere installed.
| Code Block |
|---|
ClamAV can be found for Ubuntu in the apt repository. Run this command to install ClamAV: $ sudo apt-get install clamav If you need clamd, you may also want to run: $ sudo apt-get install clamav-daemon If you require support for scanning compressed RAR files you first need to enable the non-free archive, and then you can install the RAR-plugin using: $ sudo apt-get install libclamunrar6 |
...
The Service Now Linux VPN Knowledgebase article describes obtaining AnyConnect from the VPN server itself. However, the auto-detect mechanism requires Java which you your system may not have (I didn't). Instead, I installed Cisco AnyConnect manually . Cisco AnyConnect manual installation can be done following the instructions at Cisco AnyConnect manual install. To install, you need to unpack the downloaded archive and run a shell script:
...