Page History

...

• Load the configuration for the system configuration (back end: ATCA (advanced telecommunication computing architecture) and front end (FEB+Hybrid+APVs)) . Click on the HpsSvtDaqRoot tab and load settings

  No Format
  /u1/hps/daq/heavy-photon-daq/software/config/rce-test.yml

  There is a copy of this configuration file in /u1/hps/server/heavy-photon-daq/software/config/

Setting on the Hybrids

In Variables tab navigate to the FebArray→FebCore→FebConfig and HybridPwrEn the 0 and 1 (the power supply might not be able to sustain 3 hybrids, but should be OK for 2)

Sending reset commands to the Hybrids

Navigate to "Commands" tab and in PcieTiDtmArray click the sequence:

1) ApvClkAlign     (to set all the APVs to the same phase)
2) ApvReset101.  (reset and start to wait for a trigger signal)

Configuration files used to configure rogue.
The 2019 CODA (central DAQ software at jLab) configuration files for HPS DAQ are stored on jLab machines at

...