Page History

...

• Connect to the rdusr219 machine

• Setup the general environment: 

  No Format
  source /u1/hps/setup_env.sh

• Start the conda environment:

  No Format
  conda activate rogue-hps-ben

• Load the configuration for the system configuration (back end: ATCA (advanced telecommunication computing architecture) and front end (FEB+Hybrid+APVs))  

  No Format
  /u1/hps/daq/heavy-photon-daq/software/config/rce-test.yml

Configuration files used to configure rogue.
The 2019 CODA (central DAQ software at jLab) configuration files for HPS DAQ are stored on jLab machines at

/usr/clas12/release/1.4.0/parms/trigger/HPS/Run2019/

The general configuration for the DAQ usually ends in .trg, the relevant block for SVT is under the #SVT Config block in one of those files.
This should point to something like ..../svt/svt_config.cnf, where the configuration should be pointed. 

To access this information, one needs to ssh to the clonfarm machines. In particular, clonfarm2 and clonfarm3 are the SVT DAQ machines.

Setup of RCE bootloader for diskless booting: (based on this page)

...