...
| 184 | 04/06/18 16:17 | 04/06/18 16:17 | 0 | Rotation: 150.07 to 161.24 | restarted DAQ | unchanged | to calculate |
| 185 | 04/06/18 16:20 | 04/06/18 15:04 | 9973 | unchanged | good | unchanged | 161.24 corresponds to |
| 186 | 04/06/18 17:11 | 04/06/18 17:45 | 9976 | unchanged | good | unchanged | same |
17:34 Plan:
- take two runs for each position of the chip,
- take a snapshot for each position, save the picture on the desktop, note the name of the picture in the table
- note the position of the motor in the table
- when reached perpendicular to the beam take the data for the end of the beam
- when the beam is off (and all angles are covered) notify Ben/Timon so we can tune the chip to a different threshold and wait for futher instructions
- before each start of the run, load the config files
- restart the DAQ system
- check the correlation plots Telescope - RD53a