...
166 | 04/06/18 05:52 | 04/06/18 05:59 | 2076 | unchanged | Primary beam E 14.08GeV control room called to let us know that the beam will be off for few minutes for gas detector calibration | unchanged | still 75 degrees |
167 | 04/06/18 06:03 | 04/06/18 06:37 | 9998 | unchanged | unchanged | still 75 degrees | |
168 | 04/06/18 06:39 | 04/06/18 06:50 | 3910 | unchanged | control room called as they are changing the beam energy for primary experiment. No beam for few minutes | unchanged | still 75 degrees |
169 | 04/06/18 06:59 | 04/06/18 07:35 | 9988 | unchanged | Primary beam E 12.4GeV Toni from control room called to inform that they are calibrating their gas detectors so turning off the beam for minute. Beam condition is unchanged so didn't stopped the run | unchanged | still 75 degrees |
170 | 04/06/18 07:36 | 04/06/18 08:08 | 9997 | unchanged | unchanged | still 75 degrees | |
171 | 04/06/18 08:11 | DAQ crashed | |||||
172 | 04/06/18 08:15 | 04/06/18 08:48 | 9978 | unchanged | This is the run after crash and it doesn't show the correlation between the telescope planes and RD53 module | unchanged | still 75 degrees |
173 | 04/06/18 08:50 | 04/06/18 09:25 | 9944 | unchanged | correlation plots look good | unchanged | still 75 degrees |
174 | 04/06/18 09:28 | 04/06/18
| ~1500 | Rotate: 153.13 to 159.13 | used for rotation | unchanged | 81 degrees |
175 | 04/06/18 09:40 | 04/06/18 10:05 | 6075 | unchanged | all good, we had to stop the run because the beam is down | unchanged | 81 |
10:05 Control Room called to let us know that the beam is down, they are changing the energy. Restart when the beam is back.
10:32 Beam is back, beam position changed a bit
176 | 04/06/18 10:33 | 04/06/18 11:06 | 9993 | unchanged | good, beam focused to the diff FE | unchanged | 81 |
177 | 04/06/18 11:07 | 04/06/18 11:10 | 910 | X fine: -25.00 mm to -24.00 | adjusting horizontally to the new beam position | unchanged | 81 |
178 | 04/06/18 11:12 | 04/06/18 11: | unchanged | good | unchanged | 81 | |