...
| Run | Start Time | End Time | Number of Events | Window Coordinates (DUT) | Notes | Mounting Orientation | Rotation (angle of sensor normal to beam) | |
|---|---|---|---|---|---|---|---|---|
| 149 | 03/06/18 22:24 | 03/06/18 22:36 | ~3000 | no change | very low hit rate in RD53A, perhaps due to remnant configuration from calibration scan | columns running up & down | 0 | |
| 150 | 03/06/18 22:38 | 03/06/18 23:11 | 9997 | no change | after stopping DAQ and restarting through init and configure | no change | no change | |
| 151 | 03/06/18 23:12 | 03/06/18 23:46 | 9981 | no change | Hit rates seem about 10% lower than in previous run. Reason unknown. | no change | no change | |
| 152 | 03/06/18 23:48 | 04/06/18 00:01 | 5021 | Rotation: from 78.17 to 153.13. | used for rotation of the chip | no change | 75 degrees |
We confirmed that the cluster size is roughly 7-8 pixels in this last run.
00:01 Beam is off for calibration
00:10 Beam is back on
| Run | Start Time | End Time | Number of Events | Window Coordinates (DUT) | Notes | Mounting Orientation | Rotation (angle of sensor normal to beam) |
|---|---|---|---|---|---|---|---|
| 153 | 04/06/18
| ||||||