...
Run Number | Start time | End time | Number of Events | Window coordinates (DUT) | Comments | |||
---|---|---|---|---|---|---|---|---|
90 | 02/06/18 11pm | 02/06/18 11:25 pm | 8655 | x=100~300 | ||||
91 | 02/06/18 11:27 pm | |||||||
92 | 02/06/18 11:27 pm | 03/06/18 00:27 am | 19007 | We hadn't saved the histogram at the end of run 91, so the run histogram just has twice as much data. But the beam conditions were stable between these two runs. | ||||
93 | 03/06/18 00:30 am | 03/06/18 01:03 am | 9021 | |||||
94 | 03/06/18 01:05 am | 03/06/18 01:36 am | 9284 | |||||
95 | 03/06/18 01:39 am | 03/06/18 02:07 am | 9013 | |||||
96 | moving the RD53: up 1cm (Motor 3: Y fine : > 1cm) | |||||||
97 | 03/06/18 02:24 am | 03/06/18 02:54 am | 9113 | |||||
98 | 03/06/18 02:57 am | 03/06/18 | 6845 | Changed shift to Ke and Jannicke Stopped early because we were looking at Sensor 0 for measuring the number of events, will be using number of events from Sensor 2 from now on - it does not have hot pixels! | ||||
99 | 03/06/18 3:14 am | 03/06/18 3:40am | 9210 | |||||
100 | 03/06/18 3:40am | 03/06/18 4:06am | 9406 | |||||
101 | 03/06/18 4:06am | 03/06/18 4:34am | 9425 | |||||
102 | 03/06/18 4:34am | 03/06/18 5:04 | 9173 | |||||
103 | 03/06/18 5:04am | 03/06/18 5:31am | 9150 | X: (0,~100) | Moved RD53 (Motor 3 Y:fine < 2 cm) RBV from step at 10.00mm now. Aiming for coverage of 0-100 in X | |||
104 | 03/06/18 5:31am | 03/06/18 | 9245 | Moved RD53 (Motor 3 Y:fine > 2 mm) RBV from step at 12.00mm now, adjustment was made to get slightly better coverage in the 50-100 range. Looks good now! | ||||
105 | 03/06/18 | 03/06/18 6:12am | Run stopped early - noticed histograms stopped filling ERROR IN DUT DATA PRODUCER vent: tag(0) l1id(14 bcid(11398) hits (0) ERROR IN TLU PRODUCER: Error sending data: While copying this error message pressed control C in TLU Producer ------------------------------------ restarted ./STARTRUN reran ./TLUProducer.exe -r 172.27.100.8:44000 reconfigured EUDAQ in EUDAQ RD using ni_coins_YARR because it seems like it was the most recently updated starting run 933 Histograms not popping up; killing all jobs and restarting ------------------------------------------------ went through steps 1-3 Called Su Dong: suggested we look at size of files df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20030100 18989568 16392 100% /
moved data files to /home/tfuser/data_20180603/ Now down to 81% full Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20030100 15243540 3762420 81% / Okay, so source of the problem was the disk full. -------------------------------------- Step 3 shows errors in finding libraries [tfuser@ar-eudaq eudaq-1.7]$ ./OnlineMon.exe: /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.8' not found (required by ./OnlineMon.exe) ./OnlineMon.exe: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by ./OnlineMon.exe) NEEDED TO SOURCE SETUP_EUDAQ.SH. Edited twiki to reflect this. ----------------------------
./TLUProducer.exe -r 172.27.100.8:44000 bin/YarrProducer -h configs/controller/specCfgExtTrigger.json -c configs/connectivity/example_rd53a_setup.json -s configs/scans/rd53a/std_exttrigger.json -r 172.27.100.8 Step 4 Cannot connect to pixel@172.27.104.52 ssh_exchange_identification: Connection closed by remote host We can ping 172.27.104.52 but cannot log into it? Why? ------------------------------------------ From our end we are able to ssh into other places, so the issue appears to be with the 172.27.104.52 computer. We also tried just sshing with no username and this just hangs. Looked through ssh keys, no username associated with IP address although a key exists. We think we might need to reset the computer, but the beam is on.
| |||||
03/06/18 | Timon and Alexandra have arrived, Timon made an access and they are now resetting the computer. We stopped the HGTD run before the access request was made. | |||||||
106 | 03/06/18 | 03/06/18 9:05 | 9334 | Beam is back, restarted a new run. Also restarted a new run for HGTD | ||||
107 | 03/06/18 9:08 | 03/06/18 9:40 | 9384 | Transferred to Alexandra | ||||
108 | 03/06/18 09:41 | 03/06/18 | empty | |||||
The beam was turned off at 9:51. 108-119 are runs without beam used for testing the YarrProducer setup. No root files saved. RD53a config file changed. | ||||||||
120 | 03/06/18 10:50 | 03/06/18 10:53 | few events | To test the config files. | ||||
121 | 03/06/18 10:54 | 03/06/18 |
| First run for analyzing with a new config. Restarted a new run for HGTD. |