rename rolled BKYDAS1-6 to BKRDAS1-6 (per naming convention)

move definitions of DDASA1, DDASA2 drifts to ALINE.xsif and rename

add three quads QDAS1b, QDAS2b, QDAS18b for compatibility with 8 GeV

LCLS2SC\

20170306_06MAR17\

reduce number of kickers from 7 to 6 (T. Beukers)

correct minor error in kicker length formulas

move PRDAS14 to center of the drift between quads QDAS14 and QDAS15

move PRDAS17 to upstream side of QDAS17 to avoid interference with BXSP1H

LCLS2SC\

20161128_28NOV16\

match DASEL to new trajectory between BSY pulsed magnets and BXAM1

Increase x-offset of DASEL line between DC-bends from 35 to 40 cm

add a note that BRDAS2 is a merge DC-bend which is turned ON for

 DASEL beam to A-line or OFF for beam to A-line from BSY pulsed magnets !

LCLS2SC\

20161104_04NOV16\

add Y-corrector YCDAS1 (to compensate for missing trims on BYDAS1,2)

move YCDAS15 downstream and rename to YCDAS17 (for better phase) !

DASEL\

20160926_26SEP16\

remove weak vertical bends BYDAS1, BYDAS2

roll kicker/septum to compensate kicker vertical angle

rematch geometry & optics to compensate kicker orbit & dispersion !

change quad type from 2Q10 to 2Q4W

rename QDAS1 -> QDAS1a, QDAS2 -> QDAS2a

resolve interferences:

move QDAS1&2 and BYDAS2 0.815 m downstream

move QDAS19 0.6 m upstream --> this will move QDAS17 0.45 m upstream

increase the number of kickers to 7 and move them 3 m upstream,

note: this will also require moving dumpline BPMSP1D 3 m upstream