Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
...
Label | Name | Description |
---|---|---|
1 | Application Menu Bar | contains menus with commands |
2 | Status Panel | application's current status (connected or disconnected) |
3 | Date Panel | shows when status last changed |
4 | Control Buttons | used to connect, disconnect, pause, continue, etc. |
5 | Data Source | available data sources (files or ET) |
6 | Event Dashboard | statistics for the current session |
7 | System Status Monitor Tab | system status monitoring tables (for alarms) |
8 | Log Tab | list of application log messages |
9 | Trigger Diagnostics | shows trigger diagnostics info when the right Driver is active in the job |
10 | Plot Panel | shows the current set of plots in the session |
11 | Plot Info Panel | shows information about the currently selected plot |
...
Previously saved settings may also be loaded in the application under Load Settings in the Settings menu. You should give these files the extension of .prop to indicate that they are Java properties files. The settings will not take effect until a new session is started. If there is a currently active session, it will not be affected.
Configuring Settings
Settings can be configured in the GUI by clicking on Open Settings Window under the Settings
...
menu.
The first tab contains settings for configuring the application's connection to an ET server.
Setting | Description | Notes |
---|---|---|
ET Name | name of the ET buffer file | |
Host | ET server's TCP/IP hostname | |
Port | port for connection to server | |
Blocking | block when reading from ET system | usually should be deselected |
Verbose | run ET station in verbose mode | |
Station Name | the name of the ET station used by the monitoring application | should not exist already |
Chunk Size | ||
Queue Size | ||
Station Position | ||
Wait Mode | ||
Wait Time |
...