Page History

...

This approach (supported for data after October 2015) is simplest, but has the disadvantage that it is not guaranteed to be able to keep up with the data (but in most cases it does when using MPI as shown in the example here).  It requires using 3 extra keywords when constructing your DataSource:

ds = DataSource('exp=xpptut15:run=54:smd:dir=/reg/d/ffb/xpp/xpptut15/xtc:live')

• "smd" means use the DAQ small data, as used in many of the psana-python examples (in particular the MPI example here)
• the "dir=" argument tells the analysis code to use a special set of disks (fast-feedback, or "FFB") reserved for the running experiment
• the "live" argument tells the analysis code to wait for additional data in case the analysis "catches up" to the DAQ

This analysis can be submitted to the batch system as usual, but should use either psnehhiprioq/psfehhiprioq batch queue (only when your experiment is actively running) as described here It typically uses dedicated "fast feedback" (FFB) resources as described here: Fast Feedback System.

Real-Time Analysis Using "Shared Memory"

...