...
| Table of Contents |
|---|
Introduction
This document is the basis of a paper comparing PingER performance on a 1 U bare metal host to that on a Raspberry Pi.This is a project suggested by Bebo White to build and validate a PingER Measurement Agent (MA) based on an inexpensive piece of hardware called a Raspberry Pi (see more about Raspberry Pi) using a linux distribution as the Operating System (see more about Raspbian). If successful one could consider using these in production: reducing the costs, power drain (they draw about 2W of 5V DC power compared to typically over 100W for a deskside computer or 20W for a laptop) and space (credit card size). This is the same type of power required for a smartphone so appropriate off the shelf products including a battery and solar cells are becoming readily available. Thus the Raspberry could be very valuable for sites in developing countries where cost, power utilization and to a lesser extent space may be crucial.
...
| sitka.triumf.ca to pinger.slac.stanford.edu | sitka.triumf.ca to pinger-raspberry.slac.stanford.edu | |
|---|---|---|
| Time series |  |  |
| Frequency Distribution of RTT |
|
|
| Frequency distribution of Abs(IPD) |
|
|
| Frequency distribution of IPD |
  |
|
To sitka.triumf.ca from SLAC
...