Page History
...
| Code Block |
|---|
# TITLE Geometry parameters of CSPAD2X2 # DATE_TIME 2014-10-03 12:27:11 PDT # METROLOGY /reg/neh/home1/dubrovin/LCLS/CSPad2x2Metrology/CSPad2x2/2014-04-25-CSPAD2X2-3-MEC-Metrology.txt # AUTHOR dubrovin # EXPERIMENT Any # DETECTOR CSPAD2X2 # CALIB_TYPE geometry # COMMENT:01 Table contains the list of geometry parameters for alignment of 2x1 sensors, quads, CSPAD, etc # COMMENT:02 All translation and rotation pars of the object are defined w.r.t. parent object Cartesian frame # PARAM:01 PARENT - name and version of the parent object # PARAM:02 PARENT_IND - index of the parent object # PARAM:03 OBJECT - name and version of the object # PARAM:04 OBJECT_IND - index of the new object # PARAM:05 X0 - x-coordinate [um] of the object origin in the parent frame # PARAM:06 Y0 - y-coordinate [um] of the object origin in the parent frame # PARAM:07 Z0 - z-coordinate [um] of the object origin in the parent frame # PARAM:08 ROT_Z - object design rotation angle [deg] around Z axis of the parent frame # PARAM:09 ROT_Y - object design rotation angle [deg] around Y axis of the parent frame # PARAM:10 ROT_X - object design rotation angle [deg] around X axis of the parent frame # PARAM:11 TILT_Z - object tilt angle [deg] around Z axis of the parent frame # PARAM:12 TILT_Y - object tilt angle [deg] around Y axis of the parent frame # PARAM:13 TILT_X - object tilt angle [deg] around X axis of the parent frame # HDR PARENT IND OBJECT IND X0[um] Y0[um] Z0[um] ROT-Z ROT-Y ROT-X TILT-Z TILT-Y TILT-X CSPAD2X1:V1 0 SENS2X1:V1 0 21848 10490 6 180 0 0 -0.00197 -0.01049 0.03004 CSPAD2X1:V1 0 SENS2X1:V1 1 21943 33908 4 180 0 0 -0.16127 -0.00262 -0.01639 |
date-to-bd-CSPAD2X2-3-MEC-Metrology.txt (1.0 SN07 D12A18)
Note from Gabriel and Philip:
| Note |
|---|
Philip and I inspected the CSPAD 140Ks that we received last week (CSPAD 1,2,3,5): - CSPADs 1, 2 and 5 have the same metrology as that on February 13, 2013. - CSPAD 3 has been fixed meanwhile (initially it contained 2x2 module #111, which is the one in your metrology file). Now its 2x2 module is replaced with #7 (metrology file attached). This metrology file should be applied in all experiments that took place after the service date. To find out this date, we will consult with you further. - CSPAD 4 is only a mechanical assembly (see other e-mail sent a few weeks ago). Thanks, Gabriel and Philip |
Original metrology file from Gabriel Blaj: date-to-bd-CSPAD2X2-3-MEC-Metrology.xlsx
Archive directory: /reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-date-to-bd/
Quality check:
| Code Block |
|---|
2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in X-Y plane:
segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL)
Quad 0
segm: 0 20981 20978 -33 -36 -43703 -43708 -17 -22 0.04523 48482 48477 5 3 5
segm: 1 20978 20974 -152 -156 -43707 -43702 -73 -68 0.20189 48474 48480 -6 4 -5
2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in Z:
segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um)
Quad 0
segm: 0 20979 -43705 43705 20979 -1 31 -37 -5 15 -21 -32 -32 -21 15 -0.02753 0.04097 32.009
segm: 1 20976 -43704 43704 20976 -28 -38 5 -5 -33 0 10 10 0 -33 0.00000 -0.09014 -10.007 |
Calibration files:
center/0-end.data (in pixels)
tilt/0-end.data (in degree)
geometry/0-end.data
Calibration files
In local space
...
Overview
Content Tools