Page History

...

and then configure PlotAnalyze as follows:

[TimeTool.PlotAnalyze]
tt_get_key = TSS_OPAL     # or whatever the input key is for TimeTool.Analyze to find the camera frame
tt_put_key = TTANA        # or whatever the output key, put_key is for TimeTool.Analyze
fignumber = 11            # starting matplotlib figure number, change to not interfere with other figure numbers you may be using
pause = 1                 # set to 0 to go through events without pause, otherwise module stops each time the laser is on

Module Check

a module that retrieves results from the event for either the above module or from data recorded online.

...