Page History
...
parameter | default value | description |
---|---|---|
| DetInfo(:Opal1000) | input source of data |
|
| key for input data, for example, it might be "calibrated" |
| "" | out file with sum of amplitudes, saved if the name is not empty |
| "" | out file with averaged amplitudes, saved if the name is not empty |
| "" | out file with rms, saved if the name is not empty |
maskfile | "" | out file with pixel mask with 0/1-for bad/good pixels, saved if the name is not empty |
| "" | out file with pixel bit-words: 0/1/2/4 for good/hot/saturated/cold, saved if the name is not empty |
maxfile | "" | out file with maximal value per pixel over events |
ftype | txt | out file type: txt (default), metatxt, bin |
| 0. | minimal threshold on rms (in ADU); If rms lower than this threshold - pixel is cold. |
| 10000. | threshold on rms (in ADU); =0 - use auto-evaluated threshold. If rms exceeds this threshold - pixel is hot. |
| -100000. | threshold on minimal intensity (in ADU); if ave exceeds this threshold - pixel is good |
| 100000. | threshold on maximal intensity (in ADU); if ave exceeds this threshold - pixel is bad |
| 1000000 | number of events before stage 1 |
| 0 | additional number of events before stage 2 |
| 0 | gate_width for stage 1 |
| 0 | gate_width for stage 2 |
| 0 | module verbosity:
|
...