Search/Navigation:
Related:
SLAC
/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Page History
...
| Event type # | Name | Notes |
|---|---|---|
| 17 | Pre Start | Indicates the "pre-start" transition in the DAQ |
| 18 | Go | Indicates the user pressed "Go" on DAQ |
| 19 | Pause | Indicates the user pressed "Pause" on DAQ |
| 20 | End | End of run marker event. |
| 31 | Epics | Epics event - Slow controls data that is injected into the data stream. |
| Bit 7 | Physics | Physics events should have bit 7 set |
| Bit 6 | Sync | Sync events (containing scalers and trigger config) should have bit 6 set. This was not working properly before 2015_03_24 (Note: The 1st event in the run will be a sync event, but does not always have the sync bit set.) |
| Bit 5 | Pulser | The pulser triggered the event. |
| Bit 4 | LED/Cosmic | LED or Cosmic trigger. |
| Bit 3 | Pairs 1 | Indicates a Pair1 trigger. |
| Bit 2 | Pairs 0 | Indicates a Pair0 trigger. |
| Bit 1 | Single 1 | Indicates a Single1 trigger. |
| Bit 0 | Single 0 | Indicates a Single0 trigger. |
EVIO Banks - 2015 Data Set
Below is a list of the banks and tags used in the 2015 Engineering Run for HPS. Note that the bank numbers and tags used are chosen by the DAQ configuration, and are thus subject to change.
| banktag | tag hex | Name | Notes |
|---|---|---|---|
| 57621 | 0xe115 | Scalers | Scaler banks |
Resources
Overview
Content Tools