Page History
...
Note |
---|
Runs of Start calibman, click on tab "Configuration" then on tab "Parameters" and set field "end:" to 100000 and field "scan" to "2000". After that regular dark run calibration should work. Do not forget to coise the detector ANDOR. The same trick with event numbers can be acheived in the calibrun command skeeping empty 1195 events: calibrun -e sxrg3715 -d ANDOR -c ./calib -P -D -r 46 -n 100000 -s 1195 or calibrun -e sxrg3715 -d ANDOR -P -D -r 46 -n 100000 -s 1195 or calibrun -e sxrg3715 -d ANDOR -P -D -r 46 -n 100000 -m 2000 |
Type common_mode
can be copied with parameters for mode 2 (see : Common mode correction algorithms ), for example
...
calibrun -e sxrg3715 -c ./calib -d ANDOR -P -D -r 46 -n 100000 -s 1195;
calibrun -e sxrg3715 -d ANDOR -P -D -r 46 -n 100000 -s 1195;
calibrun -e sxrg3715 -d ANDOR -P -D -r 46 -n 100000 -m 2000;
Get calibrated image
In psana Andor image can be retrieved from raw data to ndarray
using module ImgAlgos.AndorImageProducer.
Then it can be calibrated by the module
...