...
The following is a template for a csv file for entering the toolspecs. Note that any probe can be commented out by starting the line with 2 '#' signs ("##"). the field specifier line must all be contained on one line, as must each of the probe specifications. They are split up over multiple lines to make the example fit in the space below.
| Code Block |
|---|
TABLENAME=TOOLSPECS
\## the following 2 lines must be on one
\#srcNodeID,destNodeID,toolName,toolPath,toolDo,testtype,toolOpts1,toolOpts2,toolopts3,
time2run,runinterval,daystoanalyze,datatoanalyze
\##insert the srcnodeid and destnodeid in the first two columns
\## again, each probe specification must be on one line
\#iperf example
113,5,iperf,/home/iepm/v3src/bin/iperf,1,background-syn,-p 5000 \-t 20 \-w 20M,,,
30,600,28,iperf:iperf=w p lt 6 pt 6
\# miperf - multistream iperf example
113,5,miperf,/home/iepm/v3src/bin/miperf,1,background-syn,-p 5000 \-P 8 \-t 20 \-w 2M,,,
30,600,28,miperf:miperf=w p lt 6 pt 6;miperf:thrumin=w p lt 5 pt 1;miperf:thruavg=w p lt 7 pt 1;miperf:thrumax=w p lt 3 pt 1
113,5,traceroute,/usr/sbin/traceroute,1,background,-q 1 \-w 2,,,15,600,28,traceroute:numhops=w p lt 6 pt 6
113,5,ping,/bin/ping,1,background,-s 1000 \-c 10 \-w 20,,,15,600,28,ping:max=w p lt 7 pt 5;ping:avg=w p lt 2 pt 5;ping:m
in=w p lt 3 pt
113,5,pathchirp,/home/iepm/v3src/bin/pathchirp_rcv,1,background,-t 10 \-J 6 \-a 2 \-l 100 \-u 10000,,,45,1800,28,pathchirp
:pathchirp=w p lt 6 pt 6;pathchirp:thrumin=w p lt 5 pt 1;pathchirp:thruavg=w p lt 7 pt 1;pathchirp:thrumax=w p lt 3 pt
1
113,5,pathload,/home/iepm/v3src/bin/pathload_rcv,1,background-syn,-t 90,,,45,1800,28,pathchirp:pathchirp=w p lt 6 pt 6
;pathchirp:thrumin=w p lt 5 pt 1;pathchirp:thruavg=w p lt 7 pt 1;pathchirp:thrumax=w p lt 3 pt 1
|