Page History

...

Setup the DAQ environment. 

$ cd /u1/software/software_new 

$ source setup_env.csh 

$ cd /home/tracker/pelle/epics/medm_svt

...

Should pop up a few GUIs. (if you want to edit you can run command: $ medm GUINAME).

Setup the EPICS IOC.

$ cd /u1/software/software_new 

...

If things don't seem to work check if the control server port and IP are set correctly in the DAQ setup GUI. 

Notes:

• The update frequency need to be tuned, sometimes it can take 1-2s before values are updated.  
• If the DAQ GUI (actually the server) dies and you restart the GUI's may not reflect the new state. For example the GUI's may say ON when channel is OFF. You can press OFF and then ON in that case to sync up manually. Working on a fix for this. 

Manual control

In the DAQ GUI: go to config and turn on power to hybrids using Register: HybridXPwrEn (X=0,1,2,3).

Click <Write config>.   Check that it worked by reading status and voltages/currents.