Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
...
Click <read status> and check that more registers are found.
Go to config and turn Turn on power to hybrids using Register: HybridXPwrEn (X=0,1,2,3).
Click <Write config>.
(see below)
Do a hard reset under commands/FebCore/HybridHardReset (current on AVDDP should drop ~100mA).
...
TBF
...
Setup the DAQ environment.
$ cd /u1/software/software_new
$ source setup_env.csh
$ cd /home/tracker/pelle/epics/medm_svt
$ ./runSVTGUIs.sh
Should pop up a few GUIs.
Setup the EPICS IOC
$ cd /u1/software/software_new
$ source setup_env.csh
$ cd /home/tracker/pelle/epics/example/iocBoot/iocmyexampleApp
$ ./st.cmd
If things don't seem to work check if the control server port and IP are set correctly in the DAQ setup GUI.
In the DAQ GUI: go to config and turn on power to hybrids using Register: HybridXPwrEn (X=0,1,2,3).
Click <Write config>.
...
TBF