Page History
...
parameter | default value | description |
---|---|---|
| DetInfo(:Opal1000) | input source of data |
|
| key for input data, for example, it might be "calibrated" |
| "" | out file with sum of amplitudes, saved if the name is not empty |
| "" | out file with averaged amplitudes, saved if the name is not empty |
| "" | out file with rms, saved if the name is not empty |
maskfile | "" | out file with pixel mask with 0/1-for bad/good pixels, saved if the name is not empty |
| "" | out file with hot pixel mask with 0-for good/hot or dead pixels, saved if the name is not empty |
ftype | txt | out file type: txt (default), metatxt, bin |
| 10000. | threshold on rms (in ADU); =0 - use auto-evaluated threshold. If rms exceeds this threshold - pixel is hot. |
| -100000. | threshold on minimal intensity (in ADU); if ave exceeds this threshold - pixel is good |
| 100000. | threshold on maximal intensity (in ADU); if ave exceeds this threshold - pixel is bad |
| 1000000 | number of events before stage 1 |
| 0 | additional number of events before stage 2 |
| 0 | gate_width for stage 1 |
| 0 | gate_width for stage 2 |
| 0 | module verbosity:
|
If all file names are empty (by default), the files with pre-defined names "arr-ave-<exp>-r<run>.dat" and "arr-rms-<exp>-r<run>.dat" will be saved for averaged and rms arrays, respectively. Otherwise, the files with specified names will be saved.
Default parameters are set for regular single-stage averaging without any constrains.
See also Example for Module ImgAlgos::NDArrAverage.
...