Page History
...
source
(default: "DetInfo(:Opal1000")) – input source of datakey
(default: "") – key for input data, for example, it might be "calibrated"sumfile
(default: "") – out file with sum of amplitudes, saved if the name is not empty (for release > ana-0.9.16)avefile
(default: "") – out file with averaged amplitudes, saved if the name is not emptyrmsfile
(default: "") – out file with rms, saved if the name is not emptyhotpix_mask
(default: "") – out file with hot pixel mask, saved if the name is not emptyhotpix_thr_adu
(default: "10000.") – threshold on rms (in ADU); if rms exceeds this threshold - pixel is hot.evts_stage1
(default: 1000000) – number of events before stage 1evts_stage2
(default: 0) – additional number of events before stage 2gate_width1
(default: 0) – gate_width for stage 1gate_width2
(default: 0) – gate_width for stage 2print_bits
(default: 0) – module verbosity:- =0 - print nothing,
- +1 - input pars,
- +2 - event record,
- +4 - beginning of 3 stages,
- +8 - processed statistics at the end of each stage,
- +16 - output in files.
By default or if If all file names are empty save files: (by default), the files with pre-defined names "img-ave-rNNNNr####.dat" , and "img-rms-rNNNNr####.dat" (#### stands for run number) will be saved for averaged and rms images, respectively. Otherwise, the files with specified names will be saved.
Default parameters are set for regular single-stage averaging without any constrains.
See also Example for Module ImgAlgos::ImgAverage.
...
Overview
Content Tools