Page History

...

• center - x, y, z center position of each 2x1 for all quadrants. Comes from optical measurement.
• center_corr - additional manual correction to the center parameter. Can be applied if the optical measurement has (non-)obvious problems.
• marg_gap_shift - margins, gaps, and shifts between quads, as explained below.
• offset - x, y, z coordinates for 4 quads.
• offset_corr - additional correction to the offset. Comes from image-based tuning.
• quad_rotation - 4 quad rotation in n*90 degree. Comes from basic geometry.
• quad_tilt - 4 quad tilt in fractional degree (has . Has never been used). In latest optical measurement is accounted through the global 2x1 coordinate measurement in the detector.
• rotation - 8 2x1-rotation angle for 4 quads in n*90 degree. Comes from basic geometry.
• tilt- 8 2x1-tilt angle for 4 quads in fractional degree. Comes from optical measurement.

offset_corr

For individual quad position alignment use file: offset_corr/<run-range>.data

...