...
lat-fangorn(SIU):
| No Format |
|---|
xyplex lat-elf2^Xelf2 ^X |
The SIU will probably not give any visible response to control-X but it will enter primary boot mode. It's up to you to bring it up the rest of the way.
...
| No Format |
|---|
[paths] # archive path is where the raw output of the proxies ends up archive_path = /YOUR-WORK-AREA/scratch/stage # ingest_path is where ISOC is expecting its Level 0 output ingest_path = /YOUR-WORK-AREA/scratch/isoc # lsf path is where LsfWriter and analysis engine have lsf data lsf_path = /YOUR-WORK-AREA/scratch/lsf |
| Wiki Markup |
|---|
*_*IMPORTANT:_* _Make sure that the source code number in the \[tlmdb\] section is 79. This identifies the source of any telemetry you save in the ISOC archive as coming from a test run and not from the real spacecraft._ |
...
| Wiki Markup |
|---|
In the \[logging\] section you will normally run with logging disabled (lognbl = 0). If you set it to one then the logging files will be written to the logs directory. *_IMPORTANT:_* _At present this seems to have the side effect that only one instance of the script engine at a time can run on the host machine, so do it only when you must, e.g., test script V&V.*_ |