...
Sc2, will bring up the Input and Output voltage for configured mesh device, note that the scale factor is hardcoded as 1 on the screen. But the values can be changed via hutchutch-python regardless.
Acromag-
Acromag Channel # 15 (when starting the numbering from 0) is setup as the Input/Output for the power supply. Acromag screen can be opened from there and monitored as well.
Pegasus sample Injector Motors -
...
Important note: CXI:USR:MMC:09 (Slit Y+) is not working.
...
On cxihome go to User Devices Tab:
Pico Motor-
User pico motor can be found here -
...
It will open up this motor-window:
Wavefront sensor and Optique Peter motors (Zyla) :
On cxihome go to User Devices Tab:
Detectors -
On cxihome go to Detectors Tab:
...
Sc2 cameras can be found here :
can also be opened with:
- camViewer -c cxi_sc2_inline
- camViewer -c cxi_sc2_offaxis
To open the expert screen/settings of the camera:
- camViewer -c cxi_sc2_inline -m
- camViewer -c cxi_sc2_offaxis -m
Zyla:
zyla can be viewed only from the DAQ
...