Page History
...
This time metrology file has all coordinates in mm (milimeters with rounding up to 10 um...
Quality check
Quality check table for original metrology file
Code Block |
---|
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) dz3(um) Quad 0 pair: 0 20910 20910 -180 -180 43550 43540 90 80 -0.00413 -0.23684 48304 48306 -2 0 10 99.997 pair: 1 20920 20920 -200 -200 43560 43630 10 80 -0.00459 -0.26285 48309 48401 -92 0 -70 100.033 pair: 2 20910 20100 10 820 43550 43540 10 0 0.00011 0.00658 47960 48305 -345 -810 10 1724.336 pair: 3 20910 20900 -140 -130 43540 43530 -60 -70 -0.00310 -0.17767 48294 48294 0 -10 10 9.995 pair: 4 20900 20910 -220 -210 43540 43550 90 100 -0.00494 -0.28289 48296 48311 -15 -10 -10 -69.579 pair: 5 20920 20900 40 20 43200 43550 -20 330 0.00069 0.03968 48304 47999 305 20 -350 34.059 pair: 6 20910 20910 -130 -130 43530 43540 -70 -60 -0.00299 -0.17109 48294 48298 -4 0 -10 0.002 pair: 7 20910 20909 -130 -129 43540 43540 -60 -60 -0.00297 -0.17041 48302 48298 4 -1 0 -30.000 |
Applied corrections
- pair 1: Correction to point 2: x+0.07mm; 0.01 → 0.08
- pair 2: Correction to point 16: x−0.8mm; 44.63 → 43.83
- pair 5: Correction to point 24: x+0.35mm; 90.62 → 90.97
...
- point 13 Z=−1.76 → 0
- point 17 Z=−1.75 → 0
- point 18 Z=−1.80 → 0
- point 21 Z=−1.76 → 0
- point 22 Z=−1.75 → 0
...
Quality check table for corrected metrology file
...
in X-Y
Code Block |
---|
pairsegm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) dz3(um) Quad 0 pairsegm: 0 -20910 -20910 -180 -180 4355043540 4354043550 -90 -80 -0.0041323684 -0.2368448306 48304 48306 -2 0 -10 99.997 pair: segm: 1 -20920 -20920 -200 -200 43560 43560 -80 -80 -0.0045926306 -0.2630748338 48309 48338 -29 0 0 100.000 pair segm: 2 20110 -20100 -20110 10 20 20 10 43550 -43540 -43550 10 0 0 -10 0.00011 0.0065801974 47960 47964 -4 - 10 10 39.998 pair segm: 3 20910 -20900 -14020910 -130 -140 43540 -43530 -43540 -60 70 -70 -0.0031060 -0.17767 48294 48294 0 - 10 10 9.995 pair segm: 4 2090020910 2091020900 -220 - 210 -43540 -43550 100 90 10090 -0.0049428289 -0.2828948311 48296 48311 15 -15 -10 -10 -20.009 pair 10 segm: 5 2092020900 2090020920 -40 -20 -43550 -43550 -20 -20 0.0006903947 48314 0.03947 48304 48314 -10 -20 0 10.000 pair segm: 6 -20910 -20910 -130 -130 -43540 -43530 43540 60 -70 -60 -0.0029970 -0.17109 48294 48298 -4 0 -10 0.002 pair segm: 7 -20909 -20910 20909 -129 -130 -12943540 -43540 43540 60 -60 -60 -0.00297 -0.17041 48302 48298 4 - 1 0 -30.000 |
Geometry parameters
Parameters for center and tilt are available in
Quality check table for corrected metrology file in Z
Code Block |
---|
2015-03-05 14:32:33 (info) CalibManager.GUIMetrology: Quality check in Z:
segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um)
Quad 0
segm: 0 -20910 43545 43545 20910 -90 10 -90 10 -40 -40 -100 -100 -40 -40 -0.05263 -0.10960 99.997
segm: 1 -20920 43560 43560 20920 -40 60 -80 20 10 -30 -100 -100 -30 10 -0.03946 0.02739 100.000
segm: 2 -20105 -43545 20105 43545 50 10 10 -30 30 -10 40 40 30 -10 0.08549 -0.01316 39.998
segm: 3 -20905 -43535 20905 43535 0 -10 10 0 -5 5 10 10 -5 5 -0.01370 0.00658 9.995
segm: 4 20905 -43545 43545 20905 20 0 40 20 10 30 20 20 30 10 0.03947 0.02741 -20.009
segm: 5 20910 -43550 43550 20910 -10 0 20 30 -5 25 -10 -10 25 -5 0.03289 -0.01370 10.000
segm: 6 -20910 -43535 20910 43535 10 10 -10 -10 10 -10 0 0 10 -10 0.02740 -0.01316 0.002
segm: 7 -20909 -43540 20909 43540 -20 10 -30 0 -5 -15 -30 -30 -5 -15 -0.01370 -0.01974 -30.000 |
Constants
2015-03-05 14:32:33 (info) CalibManager.GUIMetrology: parameters of type "center":
Code Block |
---|
199.76 198.51 307.20 98.55 628.98 629.41 711.43 498.54
199.76 198.51 307.20 98.55 628.98 629.41 711.43 498.54
199.76 198.51 307.20 98.55 628.98 629.41 711.43 498.54
199.76 198.51 307.20 98.55 628.98 629.41 711.43 498.54
306.45 94.25 623.52 624.25 513.94 726.85 198.35 199.14
306.45 94.25 623.52 624.25 513.94 726.85 198.35 199.14
306.45 94.25 623.52 624.25 513.94 726.85 198.35 199.14
306.45 94.25 623.52 624.25 513.94 726.85 198.35 199.14
-0.05 -0.14 0.00 -0.07 -0.14 -0.11 -0.09 -0.16
-0.05 -0.14 0.00 -0.07 -0.14 -0.11 -0.09 -0.16
-0.05 -0.14 0.00 -0.07 -0.14 -0.11 -0.09 -0.16
-0.05 -0.14 0.00 -0.07 -0.14 -0.11 -0.09 -0.16 |
2015-03-05 14:32:33 (info) CalibManager.GUIMetrology: parameters of type "tilt":
Code Block |
---|
-0.23684 -0.26306 0.01974 -0.17767 -0.28289 0.03947 -0.17109 -0.17041
-0.23684 -0.26306 0.01974 -0.17767 -0.28289 0.03947 -0.17109 -0.17041
-0.23684 -0.26306 0.01974 -0.17767 -0.28289 0.03947 -0.17109 -0.17041
-0.23684 -0.26306 0.01974 -0.17767 -0.28289 0.03947 -0.17109 -0.17041 |
2015-03-05 14:32:33 (info) CalibManager.GUIMetrology: parameters of type "geometry":
Code Block |
---|
# TITLE Geometry parameters of CSPAD
# DATE_TIME 2015-03-05 14:32:33 PST
# METROLOGY /reg/g/psdm/detector/alignment/cspad/calib-mec-2013-12-20/2013-12-20-Quad-MEC-Metrology-corr.txt
# AUTHOR dubrovin
# EXPERIMENT MEC
# DETECTOR CSPAD
# CALIB_TYPE geometry
# COMMENT:01 Table contains the list of geometry parameters for alignment of 2x1 sensors, quads, CSPAD, etc
# COMMENT:02 All translation and rotation pars of the object are defined w.r.t. parent object Cartesian frame
# PARAM:01 PARENT - name and version of the parent object
# PARAM:02 PARENT_IND - index of the parent object
# PARAM:03 OBJECT - name and version of the object
# PARAM:04 OBJECT_IND - index of the new object
# PARAM:05 X0 - x-coordinate [um] of the object origin in the parent frame
# PARAM:06 Y0 - y-coordinate [um] of the object origin in the parent frame
# PARAM:07 Z0 - z-coordinate [um] of the object origin in the parent frame
# PARAM:08 ROT_Z - object design rotation angle [deg] around Z axis of the parent frame
# PARAM:09 ROT_Y - object design rotation angle [deg] around Y axis of the parent frame
# PARAM:10 ROT_X - object design rotation angle [deg] around X axis of the parent frame
# PARAM:11 TILT_Z - object tilt angle [deg] around Z axis of the parent frame
# PARAM:12 TILT_Y - object tilt angle [deg] around Y axis of the parent frame
# PARAM:13 TILT_X - object tilt angle [deg] around X axis of the parent frame
# HDR PARENT IND OBJECT IND X0[um] Y0[um] Z0[um] ROT-Z ROT-Y ROT-X TILT-Z TILT-Y TILT-X
QUAD:V1 0 SENS2X1:V1 0 21957 33685 -5 0 0 0 -0.23684 -0.05263 -0.10960
QUAD:V1 0 SENS2X1:V1 1 21820 10360 -15 0 0 0 -0.26306 -0.03946 0.02739
QUAD:V1 0 SENS2X1:V1 2 33767 68537 0 270 0 0 0.01974 0.08549 -0.01316
QUAD:V1 0 SENS2X1:V1 3 10832 68617 -7 270 0 0 -0.17767 -0.01370 0.00658
QUAD:V1 0 SENS2X1:V1 4 69137 56492 -15 180 0 0 -0.28289 0.03947 0.02741
QUAD:V1 0 SENS2X1:V1 5 69185 79895 -12 180 0 0 0.03947 0.03289 -0.01370
QUAD:V1 0 SENS2X1:V1 6 78200 21802 -10 270 0 0 -0.17109 0.02740 -0.01316
QUAD:V1 0 SENS2X1:V1 7 54799 21890 -17 270 0 0 -0.17041 -0.01370 -0.01974
QUAD:V1 1 SENS2X1:V1 0 21957 33685 -5 0 0 0 -0.23684 -0.05263 -0.10960
QUAD:V1 1 SENS2X1:V1 1 21820 10360 -15 0 0 0 -0.26306 -0.03946 0.02739
QUAD:V1 1 SENS2X1:V1 2 33767 68537 0 270 0 0 0.01974 0.08549 -0.01316
QUAD:V1 1 SENS2X1:V1 3 10832 68617 -7 270 0 0 -0.17767 -0.01370 0.00658
QUAD:V1 1 SENS2X1:V1 4 69137 56492 -15 180 0 0 -0.28289 0.03947 0.02741
QUAD:V1 1 SENS2X1:V1 5 69185 79895 -12 180 0 0 0.03947 0.03289 -0.01370
QUAD:V1 1 SENS2X1:V1 6 78200 21802 -10 270 0 0 -0.17109 0.02740 -0.01316
QUAD:V1 1 SENS2X1:V1 7 54799 21890 -17 270 0 0 -0.17041 -0.01370 -0.01974
QUAD:V1 2 SENS2X1:V1 0 21957 33685 -5 0 0 0 -0.23684 -0.05263 -0.10960
QUAD:V1 2 SENS2X1:V1 1 21820 10360 -15 0 0 0 -0.26306 -0.03946 0.02739
QUAD:V1 2 SENS2X1:V1 2 33767 68537 0 270 0 0 0.01974 0.08549 -0.01316
QUAD:V1 2 SENS2X1:V1 3 10832 68617 -7 270 0 0 -0.17767 -0.01370 0.00658
QUAD:V1 2 SENS2X1:V1 4 69137 56492 -15 180 0 0 -0.28289 0.03947 0.02741
QUAD:V1 2 SENS2X1:V1 5 69185 79895 -12 180 0 0 0.03947 0.03289 -0.01370
QUAD:V1 2 SENS2X1:V1 6 78200 21802 -10 270 0 0 -0.17109 0.02740 -0.01316
QUAD:V1 2 SENS2X1:V1 7 54799 21890 -17 270 0 0 -0.17041 -0.01370 -0.01974
QUAD:V1 3 SENS2X1:V1 0 21957 33685 -5 0 0 0 -0.23684 -0.05263 -0.10960
QUAD:V1 3 SENS2X1:V1 1 21820 10360 -15 0 0 0 -0.26306 -0.03946 0.02739
QUAD:V1 3 SENS2X1:V1 2 33767 68537 0 270 0 0 0.01974 0.08549 -0.01316
QUAD:V1 3 SENS2X1:V1 3 10832 68617 -7 270 0 0 -0.17767 -0.01370 0.00658
QUAD:V1 3 SENS2X1:V1 4 69137 56492 -15 180 0 0 -0.28289 0.03947 0.02741
QUAD:V1 3 SENS2X1:V1 5 69185 79895 -12 180 0 0 0.03947 0.03289 -0.01370
QUAD:V1 3 SENS2X1:V1 6 78200 21802 -10 270 0 0 -0.17109 0.02740 -0.01316
QUAD:V1 3 SENS2X1:V1 7 54799 21890 -17 270 0 0 -0.17041 -0.01370 -0.01974
CSPAD:V1 0 QUAD:V1 0 -4500 -4500 0 90 0 0 0.00000 0.00000 0.00000
CSPAD:V1 0 QUAD:V1 1 -4500 4500 0 0 0 0 0.00000 0.00000 0.00000
CSPAD:V1 0 QUAD:V1 2 4500 4500 0 270 0 0 0.00000 0.00000 0.00000
CSPAD:V1 0 QUAD:V1 3 4500 -4500 0 180 0 0 0.00000 0.00000 0.00000 |
Alignment check with rings
Left plot is from Zhou e-mail obtained with constants for MecTargetChamber.0:Cspad.0 from 2013-12-10
Right plot is generated with latest available optical measurement for MecTargetChamber.0:Cspad.0 from 2013-12-20 (different date and corrections to measurements were applied).
Geometry parameters
Parameters for center, tilt, and geometry are available in
Archive: /reg/g/psdm/detector/alignment/cspad/reg/neh/home1/dubrovin/LCLS/CSPadAlignment-v01/calib-mec-2013-12-20/*/0-end.datacalib/
Deployment: /reg/d/psdm/mec/mecf9615/calib/?
Summary
- X coordinates are corrected for points 2, 16, 24
- Z coordinate is corrected for points 13, 17, 18, 21, 22
- After that all deviations are ~10um.
...