...

• 27 nodes needed
• shutdown 30
• 3 broken (cmp006, 13, 15)

SRCF cabling

Nodes

Cabling

Top Patch Panel:

...

cmp006 (timing) (close to the USB port)

...

1: cmp022(away from USB port)

2: cmp022(close to USB port)

3: cmp023 (away from USB port)

4: cmp023 (close to USB port)

...

1: cmp018(away from USB port)

2: cmp018(close to USB port)

3: cmp019 (away from USB port)

4: cmp019 (close to USB port)

...

1: cmp009(away from USB port)

2: cmp009(close to USB port)

3: cmp017 (away from USB port)

4: cmp017 (close to USB port)

...

1: cmp008

2: cmp010

3: cmp016

4: cmp025

...

1: cmp024(away from USB port)

2: cmp024(close to USB port)

3: -

4: -

...

1: cmp020(away from USB port)

2: cmp020(close to USB port)

3: cmp021 (away from USB port)

4: cmp021 (close to USB port)

...

1: cmp029

2: cmp030

3: -

4: -

...

1: cmp026

2: cmp027

3: cmp028

4: -

Room 208 Fiber Connections

See FEE Alcove Fiber Cabling for description of which patch panel in 208 goes to which detector.  Note that the fiber numbering on that page is different from here.  On the FEE alcove page we number fibers left-to-right, then top-to-bottom.  Here we use a better scheme: using the actual fiber numbers marked on the cassettes.  We should convert the FEE-alcove page to use the better scheme.

...

XPM Topology

...

Cabling

Top Patch Panel:

NOTE: the rightmost MPO connections are MPO12 (2 rows, 4 columns).  The left ones are MPO8.  We should use MPO8 for KCU.  The MPO12 are reserved for "future expansion" (can be converted to MPO8, I think).

Bottom Patch Panel (MPO):

Bottom Patch Panel (LC):

LC

Fibers 15-16: XTCAV (SXR, cpo believes) from Room 208 Rack 2 PH2 fibers 61-62 → cmp001.  61/62 means sixth cassette from the left, top fiber.

Fibers 21-22: MonoEncoder from ATCA Switch in FEE → cmp002

TMO Hutch Fiber Connections

RIX Hutch Fiber Connections

MFX Hutch Fiber Connections

XTCAV Fiber Route

SXR

From Matt: I tried to look up the exact path of the xtcav fiber, but couldn't trace it all the way through captar.  I know it comes from B921 Rack 73 to B921 BDF1;  Chris and I traced this fiber.  From there it goes to B005 Rack 611 and then to B950-R42 (now renumbered as R02) at elevation 36, I believe.  There are lots of fibers at that location, so we may need two people to locate it - hold a strobe to one end and look for it on the other end.

And rougher notes that cpo doesn't currently understand:

rack B921-BDF1
SM slot 3 to B005 FODU 3 RK 611
fibers 3 4 in fodu

In building 921 rack 73 the DMPH (HXR) server is at height 24 and DMPS (SXR) server is at height 22.

HXR

TBD, but presumably similar to SXR.

Pictures of B921 Rack 73

Front and back

Image AddedImage Added

Room 208 Fiber Connections

See FEE Alcove for description of which patch panel in 208 goes to which detector.  Note that the fiber numbering on that page is different from here.  On the FEE alcove page we number fibers left-to-right, then top-to-bottom.  Here we use a better scheme: using the actual fiber numbers marked on the cassettes.  We should convert the FEE-alcove page to use the better fiber-numbering scheme.

XPM Topology

lcls2Timing -> xpm0 -> 2 (tmo) -> 4 (tmo)
                               -> 6 (208) -> BOS
                    -> 3 (rix) -> 5 (208) -> BOS
                    -> 10(fee) -> 11(fee)
lcls1Timing -> xpm7

Problematic connections SRCF ↔ 208

• DRP-SRCF-CMP018-QSFP1 → 5.3.6 (Shows -7.27, is an HSD)
• DRP-SRCF-CMP008 (reported by ric):  Connecting DRP-SRCF-CMP008.0_TIMING (5.5.1) to XPM-6_AMC-0_SFP-1 (5.8.4) doesn’t bring up ‘TDetSim/cmp008’ in xpmpva and shows LinkRxErrs
• move base processes to mon001

Cleanup:

• old neh cmp013 going to xpm3 amc0 port 5
• old neh cmp015 going to xpm3 amc1 port 0
• LC patch panel connections to SRCF
• leftover long fibers in 208

...