...
- Trigger Daq (SW Trigger Pulse) : Sends a pulse to the software trigger enable register to stimulate an acquisition
- Stream Pause : Debug - set when frame is written to DRAM
- Stream Ready : Debug - Denote that the waveform engine is ready to forward data to software (set when waveform engine FIFO master input ready signal is set)
- Stream Overflow : Debug - denote overflow, however not used (set to 0 in waveform engine)
- Stream Error : Debug - Denote error during last acquisition
- Input Data Valid : Debug - Denoting that the incoming data is valid
- Stream Enabled : Debug - Denote that output stream in enabled
- Frame count (Frame Count) : Number of frames forwarded
- Format Sign Width (Sign Bit Position) : Position of the sign bit given that the first bit number is 0.
- Format Data Width (Data Width) : choose 32 (0) or 16 bits (1)
- Format Sign (Sign Enable): Enable sign or not (1) or not (0)
- Decimation (Decimation Averaging Enable): set if averaging is enabled
...
{"serverDuration": 99, "requestCorrelationId": "c81cc369f7d0d043"}