...
- Block the laser.
- Go to laser room and rotate an ND2 filter in the filter wheel in.
- Park e-beam.
Move the target mount into the field of view of the FrontView camera. This will be around
Motor position Target mount horizontal -120 mm Target mount vertical -20 mm - Flip front view blue glass filter IN (Beckhof → E:03 IN=IN )
- Release e-beam.
- Measure location of the beam. Write it down and use a line out. Don't take a new Beam mark.
- Park the e-beam
- Flip front view blue glass filter OUT
- Close laser iris
- Release the laser
- Use M1 to center hole on laser circle, use M2 to align to e-beam location
- Confirm alignment with electron beam
- park e-beam, block laser
Move axilens IN
Motor position Lens horizontal ~ 8.3 mm lens vertical ~ 8.05 mm - Unblock laser and confirm alignment to beam reference
Drive foil OUT
Motor position Target mount horizontal -150 mm Target mount vertical -20 mm - Go to laser room and take out ND2 filter from filter wheel.
- E-beam and laser con now be released.
...