...
meclas.YFE.
- meclas.YFE.Get()
- meclas.YFE.OnCheck()
- meclas.YFE.Trace()
- meclas.YFE.Off ()
- meclas.YFE.Set()
- meclas.YFE.On ()
- meclas.YFE.SetAll SetAll()
meclas.LPL.
- meclas.LPL.Off()
- meclas.LPL.get_curr_run()
- meclas.LPL.psmenu()
- meclas.LPL.psrefrwvfm ()
- meclas.LPL.On()
- meclas.LPL.get_curr_shape()
- meclas.LPL.pspostshot ()
- meclas.LPL.pssavewvfm ()
- meclas.LPL.SHG_opt opt() *Manual SHG Optimization MEC Home > Laser > Laser (right side page) > Others > NewportXPS_3(TimeTool)
- meclas.LPL.psefc10Hz()
- meclas.LPL.pspreshot()
- meclas.LPL.psviewwvfm ()
- meclas.LPL.get_curr_exp()
- meclas.LPL.psloadwvfm ()
- meclas.LPL.psrecipes()
meclas.EMeters.
- meclas.EMeters.EG()
- meclas.EMeters.EGall()
- meclas.EMeters.LPLInChamber()
- meclas.EMeters.EG1w2in()
- mec...rs.E_coeff_refresh()
- meclas.EMeters.SPLEG()
- meclas.EMeters.EG1wYFE1in ()
- mec...rs.E_synth_refresh()
- meclas.EMeters.gentec_refresh()
meclas.TTL_shutter.
- meclas.TTL_shutter_Status() tells you which TTL shutters are currently opened vs closed
- meclas.TTL_shutter.Toggle('openall') opens all TTL shutters
- meclas.TTL_shutter.Toggle('closeABEF') closes AB and EF TTL shutters
- meclas.TTL_shutter.Toggle('openWW') opens WEST TTL shutter
- meclas.TTL_shutter.Toggle('closeXX') closes EAST TTL shutter
- meclas.TTL_shutter.Refresh() see text below
- If you toggle the shutters using the button or the EPICS screen instead of Python, nothing is keeping track of the shutter state, so you will confuse the laser -- it will think it has one state when really it has another! As such, never touch the button or the GUI unless absolutely necessary!
- If things get out of whack, you can always come to the hutch, visually verify that ALL SHUTTER ARE OPEN, and then type in the command: TTL_shutter_refresh() This will reset the counter/reference back to being all open.
...