...

Linac Locking - RFoF Telnet IOC PVs [sioc-sys0-ms11]

New Displays

Currently, there is no RFoF test stand in Dev and hence only the Production displays are available.

To launch the linac locking dashboard GUI in Production, log onto the appropriate host (Production ==>  lcls-srv01) and then run the command mslk_dashboard:

Upon running the command successfully, the following display is invoked.  Choose RF over Fiber Expert to monitor the RFoF IOC.

Image Added

Old Displays

Note that the preferred RFoF display is the one shown above.  However, below, we include instructions on how to launch the old display directly if needed.

Production

To access and launch the displays in Production, follow the steps outlined below. 

[softegr@lcls-srv01 skoufis]$ cd $EPICS_IOCS/sioc-sys0-ms11/iocSpecificRelease/masterSourceApp/srcDisplay/
[softegr@lcls-srv01 skoufis]$ cat masterSourceApp/srcDisplay/README.rfof 

To run the the RFOF screens, follow these steps from within this directory:

1. $ source /usr/local/lcls/epics/setup/epicsenv-7.0.3.1-1.0.bash
2. $ source /usr/local/lcls/tools/script/ENVS64.bash
3. Invoke the GUI you need, i.e. 
   $ pydm -m "BASE=MSLK:SYS0:MS11" rfof.ui
   $ pydm -m "BASE=MSLK:SYS0:MS11" Errors.ui
   $ pydm -m "BASE=MSLK:SYS0:MS11" StateMachine.ui
   $ pydm -m "BASE=MSLK:SYS0:MS11" TransmitterParameters.ui
   $ pydm -m "BASE=MSLK:SYS0:MS11" ReceiverParameters.ui

The RFoF screens are PyDM-based screens and are seen below.

Image Added

Deliverables

The released software will be made available in the main IOC release area post-deployment (Dev: /afs/slac/g/lcls/epics/iocTop/masterSource/, Production:/usr/local/lcls/epics/iocTop/masterSource/).  See below for the specific repositories and tags.

...

Firmware Release

See firmware release details below.

References