Page History
Include Page | ||||
---|---|---|---|---|
|
Table of Contents |
---|
Include Page | ||||
---|---|---|---|---|
|
About
This page provides examples for selected modules from Psana psana - Module Catalog.
Auxiliary scripts
A few python scripts in ImgPixSpectra/data/
show how to process/plot the spectral array stored in the file.
...
psana.cfg
- set non-default parameters to runpsana
forImgAlgos::ImgPeakFinder
andImgAlgos::ImgPeakFilter
Thepsana
running this script saves images and peaks for event 115 in text files.PlotCameraImageFromFile.py
- Plots image and spectrum for image saved in file.PlotCameraImageAndPeaks.py
- Plots image with found peaks and spectrum.
Examples for package cspad_mod
Example for module cspad_mod::CsPad2x2Pedestals
Configuration file for pedestals calibration of two CSPAD2x2 simultaneously:
...
Output files contain results, which can be plotted for average values:
and rms values:
Examples for package CSPadPixCoords
Example for
...
module CSPadPixCoords::CSPadImageProducer
How to write the CSPad image in text file:
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc events = 5 modules = cspad_mod.CsPadCalib CSPadPixCoords.CSPadImageProducer ImgAlgos.ImgSaveInFile [cspad_mod.CsPadCalib] inputKey = outputKey = calibrated doPedestals = yes doPixelStatus = no doCommonMode = no #[CSPadPixCoords.CSPadInterpolImageProducer] [CSPadPixCoords.CSPadImageProducer] calibDir = /reg/d/psdm/<instrument>/<experiment>/calib typeGroupName = CsPad::CalibV1 source = CxiDs1.0:Cspad.0 key = calibrated imgkey = Image2D tiltIsApplied = true [ImgAlgos.ImgSaveInFile] source = CxiDs1.0:Cspad.0 #eventSave = 1 saveAll = true |
Example for module CSPadPixCoords::
...
CSPadNDArrProducer
See Module CSPadPixCoords::CSPad2x2ImageProducerCSPadNDArrProducer
Example of the configuration script for psana (cspad2x2-test.cfg):module CSPadNDArrProducer working in sequence with ImgAlgos::NDArrAverage is shown in Example for module ImgAlgos::NDArrAverage
Example for module CSPadPixCoords::CSPad2x2NDArrProducer
No Format | ||
---|---|---|
# Run this script:
# psana -c psana-meca1113-r0045-cspad-cspad2x2-dark-hotpix.cfg
| ||
Code Block | ||
| ||
[psana] files# Default calibration directory: # calib-dir = /reg/d/psdm/<instrument>mec/<experiment>/xtc/<file-name-1>.xtc events = 5 modulesmeca1113/calib files = exp=meca1113:run=45 events = 400 #skip-events = 0 modules = CSPadPixCoords.CSPad2x2NDArrProducer:1 \ = CSPadPixCoords.CSPad2x2ImageProducer ImgAlgos.ImgSaveInFile CSPadPixCoords.CSPad2x2NDArrProducer:2 \ ImgAlgos.NDArrAverage:1 \ ImgAlgos.NDArrAverage:2 [CSPadPixCoords.CSPad2x2ImageProducerCSPad2x2NDArrProducer:1] source = MecTargetChamber.0:Cspad2x2.1 inkey = outkey = DetInfo(:Cspad2x2) inkey = outimgkey = Image tiltIsApplied = true print_bits = 15 [ImgAlgos.ImgSaveInFile] source cspad2x2.1_ndarr outtype = int16 print_bits = 3 [CSPadPixCoords.CSPad2x2NDArrProducer:2] source = MecTargetChamber.0:Cspad2x2.2 inkey = outkey = cspad2x2.2_ndarr outtype = int16 print_bits = 3 [ImgAlgos.NDArrAverage:1] source = DetInfo(MecTargetChamber.0:Cspad2x2).1 key = Image fnamecspad2x2.1_ndarr avefile = cspad2x2.1-ave saveAllrmsfile = true #eventSavecspad2x2.1-rms maskfile = 5 |
Command to run:
psana -c cspad2x2-test.cfg
One of the saved files cspad2x2-<run>-<timestamp>.txt
is plotted as an image by the command
./PlotCameraImageFromFile.py cspad2x2-<run>-<timestamp>.txt 0 1200
Configuration file for cspad2x2 with pedestal subtraction
Note |
---|
Access to the CSPad2x2 aligned geometry is added on 2013-02-13 |
Example of <psana-config-file.cfg>:
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/mec/mec73313/xtc/e268-r0180-s02-c00.xtc #calib-dir = ./calib modules = cspad_mod.CsPadCalib CSPadPixCoords.CSPad2x2ImageProducer ImgAlgos.ImgSaveInFile events = 5 [cspad_mod.CsPadCalibcspad2x2.1-msk hotpixfile = cspad2x2.1-hot #evts_stage1 = 100 #gate_width1 = 100. thr_rms_ADU = 10 thr_min_ADU = 4 thr_max_ADU = 10000 print_bits = 29 [ImgAlgos.NDArrAverage:2] source = DetInfo(MecTargetChamber.0:Cspad2x2.3)2 inputKeykey = outputKey = calibratedcspad2x2.2_arrndarr doPedestals avefile = yes doPixelStatus = no doCommonMode = no [CSPadPixCoords.CSPad2x2ImageProducer] calibDircspad2x2.2-ave rmsfile = /reg/d/psdm/mec/mec73313/calib typeGroupName = CsPad2x2::CalibV1 #source = DetInfo(MecTargetChamber.0:Cspad2x2.3) source = :Cspad2x2.3 inkey = calibrated_arr outimgkey = Image tiltIsApplied = true print_bits = 15 [ImgAlgos.ImgSaveInFile] sourcecspad2x2.2-rms maskfile = cspad2x2.2-msk hotpixfile = cspad2x2.2-hot #evts_stage1 = 100 #gate_width1 = 100. thr_rms_ADU = 10 thr_min_ADU = 4 thr_max_ADU = 10000 print_bits = 29 |
This script makes ndarrays for two cspad2x2 detectors and use them evaluate average, rms, mask and hot pixel arrays.
See Module CSPadPixCoords::CSPad2x2NDArrProducer
Example for module CSPadPixCoords::CSPad2x2NDArrReshape
Example of configuration file
Code Block |
---|
[psana] #files = exp=meca1113:run=376 #events = 10 ##skip-events = 0 modules = cspad_mod.CsPadCalib \ = DetInfo(MecTargetChamberCSPadPixCoords.0:Cspad2x2.3) keyCSPad2x2NDArrProducer:clb \ = Image fnameCSPadPixCoords.CSPad2x2NDArrProducer:raw \ = cspad2x2.3 saveAllCSPadPixCoords.CSPad2x2NDArrReshape \ = true print_bits ImgAlgos.NDArrAverage:clb \ = 3 #eventSaveImgAlgos.NDArrAverage:raw # = 5 |
Example of psana configuration file to get cspad2x2 images for two detectors and save them in files, one in txt, another in tiff formats:
Code Block | ||
---|---|---|
| ||
[psana] filesEventKeys [cspad_mod.CsPadCalib] inputKey = /reg/d/psdm/xpp/xpptut13/xtc/e308-r0008-s02-c00.xtc \ outputKey = clb_data doPedestals /reg/d/psdm/xpp/xpptut13/xtc/e308-r0008-s03-c00.xtc #modules = cspad_mod.CsPad2x2Pedestals #calib-dir = ./calib calib-dir = /reg/d/psdm/xpp/xpptut13/xtc/calib modules = cspad_mod.CsPadCalib:0 \ = yes doPixelStatus = yes doCommonMode = yes [CSPadPixCoords.CSPad2x2NDArrProducer:clb] source = MecTargetChamber.0:Cspad2x2.1 inkey = clb_data outkey = cspad_mod.CsPadCalib:1 \ cspad2x2.1_clb:as_data outtype = int16 print_bits = 5 [CSPadPixCoords.CSPad2x2ImageProducer:0 \ CSPad2x2NDArrProducer:raw] source CSPadPixCoords.CSPad2x2ImageProducer:1 \ = MecTargetChamber.0:Cspad2x2.1 inkey = outkey = ImgAlgoscspad2x2.ImgSaveInFile:0 \ 1_raw:as_data outtype ImgAlgos.ImgSaveInFile:1 events = int16 print_bits = 5 [cspad_mod.CsPadCalib:0CSPadPixCoords.CSPad2x2NDArrReshape] source = DetInfo(XppGonMecTargetChamber.0:Cspad2x2.0) inputKey1 keys_in = outputKey = calibrated_arr0 doPedestals = yes doPixelStatus = no doCommonMode = yes [cspad_mod.CsPadCalib:1cspad2x2.1_raw:as_data cspad2x2.1_clb:as_data print_bits = 255 [ImgAlgos.NDArrAverage:clb] source = DetInfo(XppGonMecTargetChamber.0:Cspad2x2.1) inputKeykey = outputKey = calibratedcspad2x2.1_arr1clb doPedestals avefile = yes doPixelStatus = no doCommonMode = yes [CSPadPixCoords.CSPad2x2ImageProducer:0] calibDir arr-ave-clb rmsfile = /reg/d/psdm/xpp/xpptut13/xtc/calib typeGroupName= arr-rms-clb print_bits = CsPad2x2::CalibV1 source 255 [ImgAlgos.NDArrAverage:raw] source = DetInfo(XppGonMecTargetChamber.0:Cspad2x2.0)1 inkeykey = calibratedcspad2x2.1_arr0raw outimgkeyavefile = Image tiltIsAppliedarr-ave-raw rmsfile = false useWidePixCenter = falsearr-rms-raw print_bits = 255 |
This script produces raw and calibrated ndarrays shaped as data (185,388,2), then pass these arrays as
keys_in
...
= cspad2x2.1_raw:as_data cspad2x2.1_clb:as_data
to the CSPadPixCoords.CSPad2x2NDArrReshape module, which produces two reshaped (2,185,388) arrays and saves them in the event store with default keys
cspad2x2.1_raw, cspad2x2.1_clb
(suffixes are dropped)
then both re-shaped arrays are averaged and saved in files on disk.
Example of associated python script:
Code Block |
---|
#!/usr/bin/env python
import sys
import numpy as np
import matplotlib.pyplot as plt
import psana
psana.setConfigFile('psana-meca1113-r0376-cspad2x2-CSPad2x2NDArrReshape.cfg')
dsname = 'exp=meca1113:run=376'
print "Data source: %s" % dsname
ds = psana.DataSource(dsname)
#------------------------------
print "Initializing Matplotlib Plotter"
fig = plt.figure(figsize=(10,5), dpi=80, facecolor='w', edgecolor='w', frameon=True)
plt.ion()
plt.show()
evnum = 0
evnum_max = 50
for evt in ds.events() :
evtid = evt.get(psana.EventId)
evnum += 1
if evnum > evnum_max : break
img_as_data = evt.get(psana.ndarray_int16_3, psana.Source('DetInfo(MecTargetChamber.0:Cspad2x2.1)'), 'cspad2x2.1_clb:as_data')
img_reshpd = evt.get(psana.ndarray_int16_3, psana.Source('DetInfo(MecTargetChamber.0:Cspad2x2.1)'), 'cspad2x2.1_clb')
print 'img_as_data.shape = ', img_as_data.shape
print 'img_reshpd.shape = ', img_reshpd.shape
img_as_data.shape = (2*185,388)
img_reshpd.shape = (2*185,388)
ax1 = fig.add_axes([0.05, 0.06, 0.44, 0.87])
ax2 = fig.add_axes([0.55, 0.06, 0.44, 0.87])
fig.canvas.set_window_title('Image from arrays "as-data" and "reshaped"')
imsh1 = ax1.imshow(img_as_data, interpolation='nearest', aspect='auto', origin='upper') # , extent=img_range)
imsh2 = ax2.imshow(img_reshpd, interpolation='nearest', aspect='auto', origin='upper') # , extent=img_range)
plt.title("Event: %d.%d" % evtid.time())
plt.draw()
plt.clf() |
This script retrieves from the event store calibrated ndarrays shaped as data (185,388,2) and re-shaped (2,185,388), then re-shape both to 2-d arrays (2*185,388) and plot them. Re-shaped array looks as recognizable (without spaces between ASICs) cspad2x2 image. Array shapes "as data" looks as an overlap of two images.
See Module CSPadPixCoords::CSPad2x2NDArrReshape
JIRA issue:
Jira | ||||
---|---|---|---|---|
|
Example for module CSPadPixCoords::CSPad2x2ImageProducer
See Module CSPadPixCoords::CSPad2x2ImageProducer
Example of the configuration script for psana (cspad2x2-test.cfg):
Code Block | ||
---|---|---|
| ||
[psana]
files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc
events = 5
modules = CSPadPixCoords.CSPad2x2ImageProducer ImgAlgos.ImgSaveInFile
[CSPadPixCoords.CSPad2x2ImageProducer]
source = DetInfo(:Cspad2x2)
inkey |
Example for package ImgPixSpectra
Modules:
- ImgPixSpectra::CSPadPixSpectra
- ImgPixSpectra::CSPad2x2PixSpectra
- ImgPixSpectra::CameraPixSpectra
Example for module ImgPixSpectra::CSPadPixSpectra
See module description in Module ImgPixSpectra::CSPadPixSpectra
Configuration file psana-cxib2313-r0114-cspad-pix-spectra.cfg
:
Code Block | ||
---|---|---|
| ||
# Command to run this script: # psana -c psana-cxib2313-r0114-cspad-pix-spectra.cfg # # Other useful commands: # psana -n 5 -m PrintSeparator,PrintEventId,psana_examples.DumpCsPad /reg/d/psdm/cxi/cxib2313/xtc/e336-r0114* # psana -n 5 -m EventKeys exp=cxib2313:run=114:xtc [psana] files = exp=cxib2313:run=114:xtc #calib-dir = ./calib skip-events = 0 events = 100 modules = cspad_mod.CsPadCalib ImgPixSpectra.CSPadPixSpectra [cspad_mod.CsPadCalib] source = DetInfo(CxiDs1.0:Cspad.0) inputKey outimgkey = Image outputKeytiltIsApplied = calibratedtrue doPedestalsprint_bits = yes doPixelStatus = no doCommonMode = yes15 [ImgPixSpectraImgAlgos.CSPadPixSpectraImgSaveInFile] source = CxiDs1.0:Cspad.0 inputKeyDetInfo(:Cspad2x2) key = calibrated amin = -20. amaxImage fname = 20. nbinscspad2x2 saveAll = 10 arr_fnametrue #eventSave = cspad_spectral_array.txt |
where module cspad_mod.CsPadCalib
subtracts pedestals, apply common mode correction, and save CSPAD array in the event store with key "calibrated", which is used in the next module ImgPixSpectra.CSPadPixSpectra
.
To run this script use command
psana -c psana-cxib2313-r0114-cspad-pix-spectra.cfg
which produces two files:
...
5
|
Command to run:
psana -c cspad2x2-test.cfg
One of the saved files cspad2x2-<run>-<timestamp>.txt
is plotted as an image by the command
./PlotCameraImageFromFile.py cspad2x2-<run>-<timestamp>.txt 0 1200
Configuration file for cspad2x2 with pedestal subtraction
Note |
---|
Access to the CSPad2x2 aligned geometry is added on 2013-02-13 |
Example of <psana-config-file.cfg>
...
:
Code Block | |
---|---|
|
...
| |
[psana] files |
...
Plot for content of the file cspad_spectral_array.txt
:
Example for module ImgPixSpectra::CSPad2x2PixSpectra
See module description in Module ImgPixSpectra::CSPad2x2PixSpectra
Configuration file example for CSPad2x2PixSpectra
:
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/<instrument>/<experiment>/<file-name>.xtc modules = ImgPixSpectra.CSPad2x2PixSpectra [ImgPixSpectra.CSPad2x2PixSpectra= /reg/d/psdm/mec/mec73313/xtc/e268-r0180-s02-c00.xtc #calib-dir = ./calib modules = cspad_mod.CsPadCalib CSPadPixCoords.CSPad2x2ImageProducer ImgAlgos.ImgSaveInFile events = 5 [cspad_mod.CsPadCalib] source = CxiSc1DetInfo(MecTargetChamber.0:Cspad2x2.03) amininputKey = outputKey = = 500. amaxcalibrated_arr doPedestals = yes doPixelStatus = no doCommonMode = 1000. nbinsno [CSPadPixCoords.CSPad2x2ImageProducer] calibDir = /reg/d/psdm/mec/mec73313/calib typeGroupName = CsPad2x2::CalibV1 #source 100 arr_fname = cspad2x2-pix-spectra.txt |
To get images from saved file one may execute the auxiliary script:
Code Block | ||
---|---|---|
| ||
ImgPixSpectra/data/PlotSpectralArrayFromFile.py cspad2x2-pix-spectra.txt
|
generates image for limited range of pixels for CSPad, CSPad2x2, or Camera, respectively:
Examples for package ImgAlgos
See Package ImgAlgos
Example for module ImgAlgos::Tahometer
See Module ImgAlgos::Tahometer
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
[psana]DetInfo(MecTargetChamber.0:Cspad2x2.3) source = files:Cspad2x2.3 inkey = /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-1>.xtc\ calibrated_arr outimgkey = Image tiltIsApplied /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-2>.xtc modules= true print_bits = ImgAlgos.Tahometer15 [ImgAlgos.TahometerImgSaveInFile] dnsource = 10 print_bits = 7 |
Example for module ImgAlgos::PnccdImageProducer
See Module ImgAlgos::PnccdImageProducer
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
[psana]DetInfo(MecTargetChamber.0:Cspad2x2.3) key = Image fname = cspad2x2.3 saveAll = true print_bits = 3 #eventSave files = 5 |
Example of psana configuration file to get cspad2x2 images for two detectors and save them in files, one in txt, another in tiff formats:
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/<INSTRUMENT>xpp/<experiment>xpptut13/xtc/<filee308-r0008-names02-1>c00.xtc \ /reg/d/psdm/<INSTRUMENT>xpp/<experiment>xpptut13/xtc/<filee308-r0008-names03-2>c00.xtc #skip-events#modules = 100 events = 5 modules = ImgAlgos.PnccdImageProducer ImgAlgos.ImgSaveInFile [ImgAlgos.PnccdImageProducer] sourcecspad_mod.CsPad2x2Pedestals #calib-dir = ./calib calib-dir = /reg/d/psdm/xpp/xpptut13/xtc/calib modules = cspad_mod.CsPadCalib:0 \ = DetInfo(:pnCCD) inkey cspad_mod.CsPadCalib:1 \ = outimgkey = imgpnccd print_bits CSPadPixCoords.CSPad2x2ImageProducer:0 \ = CSPadPixCoords.CSPad2x2ImageProducer:1 \ [ImgAlgos.ImgSaveInFile ImgAlgos.ImgSaveInFile:0 \ ImgAlgos.ImgSaveInFile:1 events = 5 [cspad_mod.CsPadCalib:0] source = DetInfo(:pnCCDXppGon.0:Cspad2x2.0) keyinputKey = outputKey = imgpnccdcalibrated_arr0 fnamedoPedestals = yes doPixelStatus = no doCommonMode = pnccd-img-ev saveAllyes [cspad_mod.CsPadCalib:1] source = true #eventSaveDetInfo(XppGon.0:Cspad2x2.1) inputKey = 82 print_bits outputKey = calibrated_arr1 doPedestals = yes doPixelStatus = 1 |
This script saves text files with images like pnccd-img-ev-<run-date-time.nsec>.txt
, which can be presented as:
Example for module ImgAlgos::CameraImageProducer
See Module ImgAlgos::CameraImageProducer
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
[psana]no doCommonMode = yes [CSPadPixCoords.CSPad2x2ImageProducer:0] calibDir = /reg/d/psdm/xpp/xpptut13/xtc/calib typeGroupName = CsPad2x2::CalibV1 source = DetInfo(XppGon.0:Cspad2x2.0) inkey = calibrated_arr0 outimgkey = Image tiltIsApplied = false useWidePixCenter = false print_bits = files15 [CSPadPixCoords.CSPad2x2ImageProducer:1] calibDir = /reg/d/psdm/<INSTRUMENT>xpp/<experiment>xpptut13/xtc/<file-name-1>.xtc modulescalib typeGroupName = CsPad2x2::CalibV1 source = ImgAlgos.CameraImageProducer ImgAlgos.ImgSaveInFile events DetInfo(XppGon.0:Cspad2x2.1) inkey = calibrated_arr1 outimgkey = Image tiltIsApplied = false useWidePixCenter = false print_bits = 515 [ImgAlgos.CameraImageProducerImgSaveInFile:0] source = DetInfo(:Opal1000Cspad2x2.0) key_in = Image fname = cspad2x2.0 ftype = txt key_out#ftype = img subtract_offsettiff saveAll = true print_bits = 3 #eventSave = 155 [ImgAlgos.ImgSaveInFile:1] source = DetInfo(:Opal1000Cspad2x2.1) key = imgImage fname = img-from-my-experiment = cspad2x2.1 #ftype = txt ftype = tiff saveAll = true print_bits = 3 #eventSave = 15 |
This script saves text files with images like img-from-my-experiment-<run-date-time.nsec>.txt
, which can be drawn by the python script
./ImgAlgos/data/PlotCameraImageFromFile.py <filename>.txt <Amin> <Amax>
Example for module ImgAlgos::PrincetonImageProducer
See Module ImgAlgos::PrincetonImageProducer
Example for package ImgPixSpectra
Modules:
- ImgPixSpectra::CSPadPixSpectra
- ImgPixSpectra::CSPad2x2PixSpectra
- ImgPixSpectra::CameraPixSpectra
Example for module ImgPixSpectra::CSPadPixSpectra
See module description in Module ImgPixSpectra::CSPadPixSpectra
Configuration file psana-cxib2313-r0114-cspad-pix-spectra.cfg
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
[psana]# Command to run this script: # psana -c psana-cxib2313-r0114-cspad-pix-spectra.cfg # # Other useful commands: # psana -n 5 -m PrintSeparator,PrintEventId,psana_examples.DumpCsPad /reg/d/psdm/cxi/cxib2313/xtc/e336-r0114* # psana -n 5 -m EventKeys exp=cxib2313:run=114:xtc [psana] files = exp=cxib2313:run=114:xtc #calib-dir = ./calib skip-events = 0 events = 100 modules = cspad_mod.CsPadCalib ImgPixSpectra.CSPadPixSpectra [cspad_mod.CsPadCalib] source = DetInfo(CxiDs1.0:Cspad.0) inputKey = filesoutputKey = calibrated doPedestals = /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-1>.xtc\ yes doPixelStatus = no doCommonMode = yes [ImgPixSpectra.CSPadPixSpectra] source /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-2>.xtc modules= CxiDs1.0:Cspad.0 inputKey = ImgAlgos.PrincetonImageProducer \calibrated amin = -20. amax ImgAlgos.ImgSaveInFile events = = 3 [ImgAlgos.PrincetonImageProducer] source 20. nbins = DetInfo(:Princeton) key_in = key_out 10 arr_fname = img subtract_offset = true print_bits = 31 [ImgAlgos.ImgSaveInFile] source = DetInfo(:Princeton) key = img fname = img-xcs saveAll = true print_bits = 31 |
...
cspad_spectral_array.txt
|
where module cspad_mod.CsPadCalib
subtracts pedestals, apply common mode correction, and save CSPAD array in the event store with key "calibrated", which is used in the next module ImgPixSpectra.CSPadPixSpectra
.
To run this script use command
psana -c psana-cxib2313-r0114-cspad-pix-spectra.cfg
which produces two files:
cspad_spectral_array.txt
– array of 10-bin amplitude spectra for all pixelscspad_spectral_array.txt.sha
– file with metadata for array shape:Code Block bgColor #AAFFFF NPIXELS 2296960 NBINS 10 AMIN -20 AMAX 20 NEVENTS 100 ARRFNAME cspad_spectral_array.txt
Plot for content of the file cspad_spectral_array.txt
:
Example for module ImgPixSpectra::CSPad2x2PixSpectra
See module description in Module ImgPixSpectra::CSPad2x2PixSpectra
Configuration file example for CSPad2x2PixSpectra
...
Example for module ImgAlgos::AcqirisArrProducer
See description of parameters in Module ImgAlgos::AcqirisArrProducer
Example of the psana configuration file psana-amo01509-r0125-acqiris.cfg
:
Code Block | ||
---|---|---|
| ||
[psana]
files = /reg/d/psdm/<instrument>/<experiment>/<file-name>.xtc
modules = ImgPixSpectra.CSPad2x2PixSpectra
[ImgPixSpectra.CSPad2x2PixSpectra]
source = CxiSc1.0:Cspad2x2.0
amin = 500.
amax = 1000.
nbins = 100
arr_fname = cspad2x2-pix-spectra.txt
|
To get images from saved file one may execute the auxiliary script:
Code Block | ||
---|---|---|
| ||
ImgPixSpectra/data/PlotSpectralArrayFromFile.py cspad2x2-pix-spectra.txt
|
generates image for limited range of pixels for CSPad, CSPad2x2, or Camera, respectively:
Examples for package ImgAlgos
See Package ImgAlgos
Example for module ImgAlgos::Tahometer
See Module ImgAlgos::Tahometer
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
[psana] # Command to run this script: # psana -c psana-amo01509-r0125-acqiris.cfg; # # Useful commands: # psana -n 5 -m EventKeys exp=amo01509:run=125:xtc > test-acqiris-file.txt; # psana -n 5 -m psana_examples.DumpAcqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (C++ version) # psana -n 1 -m psana_examples.dump_acqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (python version) [psana] #files = /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s00-c00.xtc /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s01-c00.xtc files = exp=amo01509:run=125:xtc modules = ImgAlgos.AcqirisArrProducer ImgAlgos.ImgSaveInFile:wf ImgAlgos.ImgSaveInFile:wt skip-events = 0 events = 100 [ImgAlgos.AcqirisArrProducer] source = AmoETOF.0:Acqiris.0 key_in files = key_wform /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-1>.xtc\ = acqiris_wform key_wtime = acqiris_wtime fname_prefix = acq print_bits /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-2>.xtc modules = 11 ImgAlgos.Tahometer [ImgAlgos.ImgSaveInFile:wfTahometer] sourcedn = AmoETOF.0:Acqiris.0 key = acqiris_wform fname10 print_bits = 7 |
Example for module ImgAlgos::EpixNDArrProducer
See Module ImgAlgos::EpixNDArrProducer
Example of the psana configuration file:
Code Block |
---|
[psana] files = = acq-AmoETOF-wform ftype exp=xppi0414:run=94 events = txt100 #ftypemodules = = tiff #saveAllImgAlgos.EpixNDArrProducer \ = true print_bits = 3 eventSave = 5 ImgAlgos.NDArrAverage [ImgAlgos.ImgSaveInFile:wtEpixNDArrProducer] source = DetInfo(:Epix10k) key_in = key_out = epix-nda outtype = float print_bits = AmoETOF.0:Acqiris.0 key255 [ImgAlgos.NDArrAverage] source = DetInfo(:Epix10k) key = acqiris_wtime fname = epix-nda avefile = acqepix-AmoETOF-wtime ftypeave print_bits = 29 |
EpixNDArrProducer
gets Epix10k ndarray from data and saves it in the events store with possible type conversion. Then NDArrAverage
averages this ndarray over requested number of events (100) and saves it in file.
Example for module ImgAlgos::PnccdImageProducer
See Module ImgAlgos::PnccdImageProducer
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
[psana] = txt #ftype = tiff #saveAll = true print_bits = 3 eventSave = 5 |
This script with psana does a few things:
- module AcqirisArrProducer gets Acqiris data objects from event store, adjusts trigger time corrections, and saves them back in the event store as uniform ndarrays<double,2> objects for waveforms and times
- two instances of the module ImgSaveInFile save arrays of waveforms and wave-times for locally counted event 5.
This script saves 3 text files:
acq-amo01509-r0125.txt
-- with configuration parameters:Code Block Acqiris::ConfigV1: nbrBanks=1 channelMask=69905 nbrChannels=5 nbrConvertersPerChannel=4 horiz: sampInterval=2.5e-10 delayTime=0 nbrSegments=1 nbrSamples=10000 vert(0): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(1): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(2): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(3): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(4): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0
- acq-AmoETOF-wform-r0125-20091018-182512.194787218.txt – with waveforms for 5th event
- acq-AmoETOF-wtime-r0125-20091018-182512.194787218.txt – with wave-times for 5th event
Arrays from these files can be plotted for all channels, shown by different colors:
...
files = /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-1>.xtc\
/reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-2>.xtc
#skip-events = 100
events = 5
modules = ImgAlgos.PnccdImageProducer ImgAlgos.ImgSaveInFile
[ImgAlgos.PnccdImageProducer]
source = DetInfo(:pnCCD)
inkey =
outimgkey = imgpnccd
print_bits = 1
[ImgAlgos.ImgSaveInFile]
source = DetInfo(:pnCCD)
key = imgpnccd
fname = pnccd-img-ev
saveAll = true
#eventSave = 82
print_bits = 1
|
This script saves text files with images like pnccd-img-ev-<run-date-time.nsec>.txt
, which can be presented as:
Advanced example for PnccdImageProducer;
- get pnccd ndarray from data,
- calibrate ndarray (subtract pedestals, common mode, remove pixels with bad status),
- produce image with two gaps from calibrated ndarray,
- average image for 10 events:
Code Block |
---|
[psana] |
...
Example for module ImgAlgos::AcqirisAverage
See description of parameters in Module ImgAlgos::AcqirisAverage
Configuration file psana-amo01509-r0125-acqiris-average.cfg:
Code Block | ||
---|---|---|
| ||
# Command to run this script: # psana -c psana-amo01509-r0125-acqiris-average.cfg; # # Useful commands: # psana -n 5 -m EventKeys exp=amo01509:run=125:xtc > test-acqiris-file.txt; # psana -n 5 -m psana_examples.DumpAcqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (C++ version) # psana -n 1 -m psana_examples.dump_acqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (python version) [psana] #files = /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s00-c00.xtc /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s01-c00.xtc files = exp=amo01509:run=125:xtc modules = ImgAlgos.AcqirisArrProducer ImgAlgos.AcqirisAverage skip-events = 0 events = 1000 [ImgAlgos.AcqirisArrProducer] source = AmoETOF.0:Acqiris.0 key_in = key_wform = acqiris_wform key_wtime = acqiris_wtime fname_prefix = acq print_bits = 3 [ImgAlgos.AcqirisAverage] source #calib-dir = /reg/d/psdm/SXR/sxrb5914/calib files = exp=sxrb5914:run=245 events = 10 modules = AmoETOF.0:Acqiris.0 key_inImgAlgos.Tahometer \ ImgAlgos.PnccdNDArrProducer \ = acqiris_wform key_ave ImgAlgos.NDArrCalib \ ImgAlgos.PnccdImageProducer \ = acqiris_average fname_ave_prefix = acq thresholds ImgAlgos.NDArrAverage [ImgAlgos.Tahometer] dn = 100 print_bits = -0.005 -0.005 -0.005 -0.005 -0.005 is_positive_signal = no do_inverse_selection7 [ImgAlgos.PnccdNDArrProducer] source = DetInfo(Camp.0:pnCCD.1) key_in = key_out = pnccd-ndarr outtype = asdata print_bits = 0 [ImgAlgos.NDArrCalib] source = DetInfo(Camp.0:pnCCD.1) key_in = pnccd-ndarr key_out = calibrated do_peds = yes #skipdo_eventscmod = yes do_stat = yes do_mask = no do_bkgd = 0no #procdo_eventsgain = no do_nrms = no do_thre = no #fname_mask = pnccd-test-mask.txt #fname_bkgd = 100 print_bitspnccd-test-bkgd.txt masked_value = = 255 |
Psana with this script runs over 1000 events apply threshold-based selection algorithm and produces files:
acq-amo01509-r0125-config.txt -- with Acqiris configuration parameters:
Code Block Acqiris::ConfigV1: nbrBanks=1 channelMask=69905 nbrChannels=5 nbrConvertersPerChannel=4 horiz: sampInterval=2.5e-10 delayTime=0 nbrSegments=1 nbrSamples=10000 vert(0): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(1): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(2): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(3): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(4): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0
- acq-amo01509-r0125-ave-wfs.txt with averaged array of waveforms, which were below threshold (averaging for baseline level):
...
0
threshold_nrms = 4.0
threshold = 100
below_thre_value = 0
bkgd_ind_min = 10000
bkgd_ind_max = 10200
bkgd_ind_inc = 1
print_bits = 1
[ImgAlgos.PnccdImageProducer]
source = DetInfo(Camp.0:pnCCD.1)
inkey = calibrated
outimgkey = pnccd-img
gap_rows = 0
gap_cols = 16
gap_value = 0
print_bits = 1
[ImgAlgos.NDArrAverage]
source = DetInfo(Camp.0:pnCCD.1)
key = pnccd-img
avefile = pnccd-ave
rmsfile = pnccd-rms
#maskfile = pnccd-msk
#hotpixfile = pnccd-hot
thr_rms_ADU = 160
thr_min_ADU = 2
thr_max_ADU = 10000
print_bits = 29 |
Example for module ImgAlgos::CameraImageProducer
See Module ImgAlgos::CameraImageProducer
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
[psana]
files = |
...
Example for module ImgAlgos::AcqirisCalib
See description of parameters in Module ImgAlgos::AcqirisCalib
Configuration file psana-amo01509-r0125-acqiris-calib.cfg:
Code Block | ||
---|---|---|
| ||
# Command to run this script: # psana -c psana-amo01509-r0125-acqiris-calib.cfg; # # Useful commands: # psana -n 5 -m EventKeys exp=amo01509:run=125:xtc > test-acqiris-file.txt; # psana -n 5 -m psana_examples.DumpAcqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (C++ version) # psana -n 1 -m psana_examples.dump_acqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (python version) [psana] #files = /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s00-c00.xtc /reg/d/psdm/AMO<INSTRUMENT>/amo01509<experiment>/xtc/e8<file-r0125name-s01-c001>.xtc filesmodules = exp=amo01509:run=125:xtc modules = ImgAlgos.AcqirisArrProducer ImgAlgos.AcqirisCalib = ImgAlgos.ImgSaveInFile:wf_rawCameraImageProducer ImgAlgos.ImgSaveInFile:wf_calib skip-events = 0 events = 105 [ImgAlgos.AcqirisArrProducerCameraImageProducer] source = AmoETOF.0:Acqiris.0DetInfo(:Opal1000) key_in = key_wformout = acqiris_wform key_wtime = acqiris_wtime fname_prefix = acqimg subtract_offset = true print_bits = 115 [ImgAlgos.AcqirisCalibImgSaveInFile] source = AmoETOF.0:Acqiris.0DetInfo(:Opal1000) key_in = img fname = acqiris_wform key_out = img-from-my-experiment saveAll = wf-calibrated fname_base_linetrue #eventSave = acq-amo01509-r0125-ave-wfs.txt #skip_events1 |
This script saves text files with images like img-from-my-experiment-<run-date-time.nsec>.txt
, which can be drawn by the python script
./ImgAlgos/data/PlotCameraImageFromFile.py <filename>.txt <Amin> <Amax>
Example for module ImgAlgos::PrincetonImageProducer
See Module ImgAlgos::PrincetonImageProducer
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
[psana] = 0 #proc_events = 100 print_bits = 255 [ImgAlgos.ImgSaveInFile:wf_raw] source = AmoETOF.0:Acqiris.0 key = acqiris_wform fnamefiles = acq-AmoETOF-wform-raw ftype/reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-1>.xtc\ = txt #ftype /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/<file-name-2>.xtc modules = ImgAlgos.PrincetonImageProducer tiff\ #saveAll = true print_bits = 3 eventSaveImgAlgos.ImgSaveInFile events = 5 3 [ImgAlgos.ImgSaveInFile:wf_calibPrincetonImageProducer] source = AmoETOF.0:Acqiris.0DetInfo(:Princeton) key_in = wf-calibrated fname key_out = img subtract_offset = acq-AmoETOF-wform-calibrated ftype true print_bits = 31 [ImgAlgos.ImgSaveInFile] source = txt #ftypeDetInfo(:Princeton) key = tiffimg #saveAllfname = true print_bitsimg-xcs saveAll = 3true eventSaveprint_bits = 5 |
In this script the base-line level for all waveforms is loaded from file and is subtracted in module ImgAlgos.AcqirisCalib.
For example, the raw and calibrated waveforms for event 5 were saved in the files:
acq-AmoETOF-wform-raw-r0125-e00000005-20091018-182512.194787218.txt
acq-AmoETOF-wform-calibrated-r0125-e00000005-20091018-182512.194787218.txt
which content is presented on plots:
31
|
Anchor | ||||
---|---|---|---|---|
| ||||
Anchor | ||||
|
Example for module ImgAlgos::
...
AcqirisArrProducer
See description of parameters in in Module ImgAlgos::AcqirisCFDAcqirisArrProducer
Example of the psana configuration file psana-amo01509-r0125-acqiris
Configuration file psana_cfd.cfg
:
Code Block | ||
---|---|---|
| ||
# Command to run this script: # psana -c psana_cfd-amo01509-r0125-acqiris.cfg; # [psana] modules = ImgAlgos.AcqirisArrProducer ImgAlgos.AcqirisCalib ImgAlgos.AcqirisCFD files = /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s00-c00.xtc [ImgAlgos.AcqirisArrProducer] source = AmoETOF.0:Acqiris.0 key_in = key_wform = acqiris_wform key_wtime = acqiris_wtime fname_prefix = acq print_bits = 0 [ImgAlgos.AcqirisCalib] source = AmoETOF.0:Acqiris.0 key_in = acqiris_wform key_out = wf-calibrated fname_base_line = acq--r0000-ave-wfs.txt #skip_events = 0 #proc_events = 100 print_bits = 0 [ImgAlgos.AcqirisCFD] source = AmoETOF.0:Acqiris.0 key_wform = wf-calibrated baselines = 0.0 0.0 0.0 0.0 0.0 thresholds = -0.005 -0.005 -0.005 -0.005 -0.005 fractions = 0.5 0.5 0.5 0.5 0.5 deadtimes = 20.0e-9 20.0e-9 20.0e-9 20.0e-9 20.0e-9 leading_edges = 1 1 1 1 1 |
This script analyzes an AMO run where 5 acqiris channels were in use. It uses an AcqirisArrProducer to producer the list of waveforms/times for all channels. It then uses an AcqirisCalib module to do a baseline subtraction using a previously generated file of baselines act--r0000-ave-wfs.txt. Finally, a constant fraction discriminator algorithm is run on all the waveforms with user specified parameters. The edges calculated by AcqirisCFD are saved to the event as one ndarray<double,1> per channel, each with a (default) key "acqiris_edges_N" where N is the channel number. Channels where no edges were found are not saved to the event.
...
Example for combination of Acqiris modules
See description of parameters in Modules ImgAlgos::AcqirisArrProducer, AcqirisAverage, and AcqirisCalib
Configuration file psana-amo01509-r0125-acqiris-comb.cfg:
Code Block |
---|
# Command to run this script: # psana -c psana-amo01509-r0125-acqiris-comb.cfg; [psana] files = exp=amo01509:run=125:xtc modules = ImgAlgos.AcqirisArrProducer ImgAlgos.AcqirisAverage:bl ImgAlgos.AcqirisCalib ImgAlgos.AcqirisAverage:signal ImgAlgos.Tahometer #skip-events = 0 events# Useful commands: # psana -n 5 -m EventKeys exp=amo01509:run=125:xtc > test-acqiris-file.txt; # psana -n 5 -m psana_examples.DumpAcqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (C++ version) # psana -n 1 -m psana_examples.dump_acqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (python version) [psana] #files = /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s00-c00.xtc /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s01-c00.xtc files = exp=amo01509:run=125:xtc modules = ImgAlgos.AcqirisArrProducer ImgAlgos.ImgSaveInFile:wf ImgAlgos.ImgSaveInFile:wt skip-events = 0 events = 100 [ImgAlgos.AcqirisArrProducer] source = AmoETOF.0:Acqiris.0 key_in = key_wform = acqiris_wform key_wtime = acqiris_wtime fname_prefix = acq print_bits = 11 [ImgAlgos.ImgSaveInFile:wf] source = AmoETOF.0:Acqiris.0 key = acqiris_wform fname = acq-AmoETOF-wform ftype = txt #ftype = tiff #saveAll = 2010 [ImgAlgos.AcqirisArrProducer] sourcetrue print_bits = AmoETOF.0:Acqiris.0 key_in = 3 eventSave = key_wform = acqiris_wform key_wtime = acqiris_wtime fname_prefix = acq print_bits = 7 5 [ImgAlgos.AcqirisAverageImgSaveInFile:blwt] source = AmoETOF.0:Acqiris.0 key_in = acqiris_wformwtime #key_avefname = acq-AmoETOF-wtime ftype = fname_ave_prefix = acq-bline thresholds txt #ftype = -0.005 -0.005 -0.005 -0.005 -0.005 is_positive_signaltiff #saveAll = notrue doprint_inverse_selectionbits = yes skip_events = 3 eventSave = 0 proc_events = 1000 print_bits = 31 [ImgAlgos.AcqirisCalib] source = AmoETOF.0:Acqiris.0 key_in = acqiris_wform key_out = wf-calibrated fname_base_line = acq-bline skip_events = 1001 proc_events = 1000 print_bits = 47 [ImgAlgos.AcqirisAverage:signal] source = AmoETOF.0:Acqiris.0 key_in = wf-calibrated #key_ave = fname_ave_prefix = acq-signal thresholds = -0.01 -0.01 -0.01 -0.01 -0.01 is_positive_signal = no do_inverse_selection = no skip_events = 1001 proc_events = 1000 print_bits = 31 [ImgAlgos.Tahometer] print_bits = 7 |
This script works with psana as follows:
- for the 1st 1000 events averages waveforms below threshold and saves results in the file acq-bline-amo01509-r0125-ave-wfs.txt;
- for the next 1000 events subtracts baseline level and averages waveforms above thresholds and saves results in the file acq-signal-amo01509-r0125-ave-wfs.txt.
This script produces three files:
acq-amo01509-r0125-config.txt - with Acqris configuration parameters:
Code Block Acqiris::ConfigV1: nbrBanks=1 channelMask=69905 nbrChannels=5 nbrConvertersPerChannel=4 horiz: sampInterval=2.5e-10 delayTime=0 nbrSegments=1 nbrSamples=10000 vert(0): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(1): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(2): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(3): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(4): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0
- acq-bline-amo01509-r0125-ave-wfs.txt - contains baseline averaged arrays, which can be presented by full scale and zoomed plots:
- acq-signal-amo01509-r0125-ave-wfs.txt- contains signal averaged arrays, which can be presented by full scale and zoomed plots:
Example for module ImgAlgos::ImgAverage
- See Module ImgAlgos::ImgAverage
- The
ImgAverage
module can be used for evaluation of averaged pedestals or background using dedicated runs. Typical configuration file may looks like this:
5
|
This script with psana does a few things:
- module AcqirisArrProducer gets Acqiris data objects from event store, adjusts trigger time corrections, and saves them back in the event store as uniform ndarrays<double,2> objects for waveforms and times
- two instances of the module ImgSaveInFile save arrays of waveforms and wave-times for locally counted event 5.
This script saves 3 text files:
acq-amo01509-r0125.txt
-- with configuration parameters:Code Block Acqiris::ConfigV1: nbrBanks=1 channelMask=69905 nbrChannels=5 nbrConvertersPerChannel=4 horiz: sampInterval=2.5e-10 delayTime=0 nbrSegments=1 nbrSamples=10000 vert(0): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(1): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(2): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(3): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(4): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0
- acq-AmoETOF-wform-r0125-20091018-182512.194787218.txt – with waveforms for 5th event
- acq-AmoETOF-wtime-r0125-20091018-182512.194787218.txt – with wave-times for 5th event
Arrays from these files can be plotted for all channels, shown by different colors:
Anchor | ||||
---|---|---|---|---|
|
Example for module ImgAlgos::AcqirisAverage
See description of parameters in Module ImgAlgos::AcqirisAverage
Configuration file psana-amo01509-r0125-acqiris-average.cfg:
Code Block | ||
---|---|---|
| ||
# Command to run this script:
# psana -c psana-amo01509-r0125-acqiris-average.cfg;
#
# Useful commands:
# psana -n 5 -m EventKeys exp=amo01509:run=125:xtc > test-acqiris-file.txt;
# psana -n 5 -m psana_examples.DumpAcqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (C++ version)
# psana -n 1 -m psana_examples.dump_acqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (python version)
[psana]
#files = /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s00-c00.xtc /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s01-c00.xtc
files = exp=amo01509:run=125:xtc
modules = ImgAlgos.AcqirisArrProducer ImgAlgos.AcqirisAverage
skip-events = 0
events = 1000
[ImgAlgos.AcqirisArrProducer]
source = AmoETOF.0:Acqiris.0
key_in =
key_wform = acqiris_wform
key_wtime = acqiris_wtime
fname_prefix = acq
print_bits = 3
[ImgAlgos.AcqirisAverage]
source = AmoETOF.0:Acqiris.0
key_in = acqiris_wform
key_ave = acqiris_average
fname_ave_prefix = acq
thresholds = -0.005 -0.005 -0.005 -0.005 -0.005
is_positive_signal = no
do_inverse_selection = yes
#skip_events | ||
Code Block | ||
| ||
[psana] = 0 #proc_events = 100 print_bits files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name>.xtc modules = ImgAlgos.CameraImageProducer \ ImgAlgos.ImgAverage events = 1000 [ImgAlgos.CameraImageProducer] source = DetInfo(:Opal1000) key_in = key_out = img subtract_offset = true print_bits = 1 [ImgAlgos.ImgAverage] source = DetInfo(:Opal1000) key = img avefile = img-ave.dat rmsfile = img-rms.dat print_bits = 31 evts_stage1 = 100 evts_stage2 = 100 gate_width1 = 200 gate_width2 = 20 = 255 |
Psana with this script runs over 1000 events apply threshold-based selection algorithm and produces files:
acq-amo01509-r0125-config.txt -- with Acqiris configuration parameters:
Code Block Acqiris::ConfigV1: nbrBanks=1 channelMask=69905 nbrChannels=5 nbrConvertersPerChannel=4 horiz: sampInterval=2.5e-10 delayTime=0 nbrSegments=1 nbrSamples=10000 vert(0): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(1): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(2): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(3): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(4): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0
- acq-amo01509-r0125-ave-wfs.txt with averaged array of waveforms, which were below threshold (averaging for baseline level):
Anchor | ||||
---|---|---|---|---|
|
Example for module ImgAlgos::
...
AcqirisCalib
See description of parameters in Module ImgAlgos::
...
Configuration
...
file psana-amo01509-r0125-acqiris-calib.cfg:
Code Block | |||
---|---|---|---|
| |||
# Command to run this script: # psana -c psana-amo01509-r0125-acqiris-calib.cfg; # # Useful commands: # psana -n 5 -m EventKeys exp=amo01509:run=125:xtc > test-acqiris-file.txt; # psana -n 5 -m psana_examples.DumpAcqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (C++ version) # psana -n 1 -m psana_examples.dump_acqiris exp=amo01509:run=125:xtc > test-acqiris-file.txt; (python version) [psana] #files = /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s00-c00.xtc /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s01-c00.xtc files = exp=amo01509:run=125:xtc modules = ImgAlgos.AcqirisArrProducer ImgAlgos.AcqirisCalib ImgAlgos.ImgSaveInFile:wf_raw ImgAlgos.ImgSaveInFile:wf_calib skip-events = 0 events[ImgAlgos.ImgMaskEvaluation] source = DetInfo(:Opal1000) key = img file_mask_satu = img-mask-satu.dat file_mask_nois = img-mask-nois.dat file_mask_comb = img-mask-comb.dat file_frac_satu = img-frac-satu.dat file_frac_nois = img-frac-nois.dat thre_satu = 400 frac_satu = 0 dr = 1 thre_SoN = 3 frac_nois10 [ImgAlgos.AcqirisArrProducer] source = AmoETOF.0:Acqiris.050 printkey_bitsin = 63 |
Note |
---|
In this example parameters were chosen in order to get a small number of "noisy" pixel just due to statistics. |
- Typical image:
- Plots for fraction of noisy pixels:
- Plots for fraction of saturated pixels:
- Masks: noisy, saturated, and combined:
Example for module ImgAlgos::ImgCalib
- See Module ImgAlgos::ImgCalib
Code Block | ||
---|---|---|
| ||
[ImgAlgos.CameraImageProducer] source = DetInfo(:Opal1000) key_in key_wform = acqiris_wform key_outwtime = imgacqiris_wtime subtractfname_offsetprefix = trueacq print_bits = 1 [ImgAlgos.ImgCalibAcqirisCalib] source = DetInfo(:Opal1000)AmoETOF.0:Acqiris.0 key_in = img = acqiris_wform key_out = calibrated fname_peds = <pedestalwf-file-name>calibrated fname_base_maskline = <mask-file-name> fname_bkgdacq-amo01509-r0125-ave-wfs.txt #skip_events = 0 fname_gain#proc_events = 100 print_bits = 31 |
- Example of the mask file and resulting image:
Example for module ImgAlgos::ImgRadialCorrection
- See Module ImgAlgos::ImgRadialCorrection
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc \ 255 [ImgAlgos.ImgSaveInFile:wf_raw] source /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-2>.xtc \ = AmoETOF.0:Acqiris.0 key ... /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-N>.xtc skip-events = 500 events= acqiris_wform fname = 10 modules = cspad_mod.CsPadCalib \ #acq-AmoETOF-wform-raw ftype ImgAlgos.CSPadBkgdSubtract \ CSPadPixCoords.CSPadImageProducer \ = txt #ftype ImgAlgos.ImgRadialCorrection= \tiff #saveAll ImgAlgos.ImgSaveInFile:1 [cspad_mod.CsPadCalib] inputKey = true print_bits = 3 outputKey eventSave = calibrated doPedestals = yes doPixelStatus = no doCommonMode = no5 [ImgAlgos.CSPadBkgdSubtractImgSaveInFile:wf_calib] source = DetInfo(CxiDs1AmoETOF.0:CspadAcqiris.0) inputKeykey = calibrated outputKey = bkgd_subtracted_arr bkgd_wf-calibrated fname = <the-file-name-with-background-array> norm_sector = 0 print_bits = 0 [CSPadPixCoords.CSPadImageProducer] calibDiracq-AmoETOF-wform-calibrated ftype = /reg/d/psdm/<instrument>/<experiment>/calib typeGroupName = CsPad::CalibV1 source = CxiDs1.0:Cspad.0 keytxt #ftype = calibratedtiff imgkey#saveAll = current_img #tiltIsApplied = true [ImgAlgos.ImgRadialCorrection] source = DetInfo(CxiDs1.0:Cspad.0) inkey = current_img outkey true print_bits = r_cor_img xcenter3 eventSave = 866 ycenter = 857 rmin = 100 rmax = 810 n_phi_bins = 60 event = 05 |
In this script the base-line level for all waveforms is loaded from file and is subtracted in module ImgAlgos.AcqirisCalib.
For example, the raw and calibrated waveforms for event 5 were saved in the files:
acq-AmoETOF-wform-raw-r0125-e00000005-20091018-182512.194787218.txt
acq-AmoETOF-wform-calibrated-r0125-e00000005-20091018-182512.194787218.txt
which content is presented on plots:
Anchor | ||||
---|---|---|---|---|
|
Example for module ImgAlgos::AcqirisCFD
See description of parameters in Module ImgAlgos::AcqirisCFD
Configuration file psana_cfd.cfg:
Code Block | ||
---|---|---|
| ||
# Command to run this script: # psana -c psana_cfd.cfg; # [psana] modules = ImgAlgos.AcqirisArrProducer ImgAlgos.AcqirisCalib ImgAlgos.AcqirisCFD files = /reg/d/psdm/AMO/amo01509/xtc/e8-r0125-s00-c00.xtc [ImgAlgos.AcqirisArrProducer] source = AmoETOF.0:Acqiris.0 key_in = key_wform = acqiris_wform key_wtime = acqiris_wtime fname_prefix = acq print_bits = 30 [ImgAlgos.ImgSaveInFile:1AcqirisCalib] source = CxiDs1AmoETOF.0:CspadAcqiris.0 key_in = acqiris_wform key_out = r_cor_img fname = <file-name-for-image-array> #saveAll = true eventSave = 8 |
- Note: the option of the background subtraction (
ImgAlgos.CSPadBkgdSubtract
) is commented out in this configuration file . In order to evoke this option, the comment sign (#) should be removed from the list ofmodules
and thekey=bkgd_subtracted_arr
should be used inCSPadPixCoords.CSPadImageProducer
. - Calibrated image and spectrum:
- Calibrated and radial-corrected image, spectrum, and subtracted r-phi65 distribution for
n_phi_bins
=65: - Calibrated and radial-corrected image, spectrum, and subtracted r-phi12 distribution for
n_phi_bins
=12: Example for module ImgAlgos::ImgPeakFinder
- See Module ImgAlgos::ImgPeakFinder
- Configuration file example:
wf-calibrated
fname_base_line = acq--r0000-ave-wfs.txt
#skip_events = 0
#proc_events = 100
print_bits = 0
[ImgAlgos.AcqirisCFD]
source = AmoETOF.0:Acqiris.0
key_wform = wf-calibrated
baselines = 0.0 0.0 0.0 0.0 0.0
thresholds = -0.005 -0.005 -0.005 -0.005 -0.005
fractions = 0.5 0.5 0.5 0.5 0.5
deadtimes = 20.0e-9 20.0e-9 20.0e-9 20.0e-9 20.0e-9
leading_edges = 1 1 1 1 1 |
This script analyzes an AMO run where 5 acqiris channels were in use. It uses an AcqirisArrProducer to producer the list of waveforms/times for all channels. It then uses an AcqirisCalib module to do a baseline subtraction using a previously generated file of baselines act--r0000-ave-wfs.txt. Finally, a constant fraction discriminator algorithm is run on all the waveforms with user specified parameters. The edges calculated by AcqirisCFD are saved to the event as one ndarray<double,1> per channel, each with a (default) key "acqiris_edges_N" where N is the channel number. Channels where no edges were found are not saved to the event.
Anchor | ||||
---|---|---|---|---|
|
Example for combination of Acqiris modules
See description of parameters in Modules ImgAlgos::AcqirisArrProducer, AcqirisAverage, and AcqirisCalib
Configuration file psana-amo01509-r0125-acqiris-comb.cfg:
Code Block | ||
---|---|---|
# Command to run this script:
# psana -c psana-amo01509-r0125-acqiris-comb.cfg;
[psana]
files = exp=amo01509:run=125:xtc
modules = ImgAlgos.AcqirisArrProducer ImgAlgos.AcqirisAverage:bl ImgAlgos.AcqirisCalib ImgAlgos.AcqirisAverage:signal ImgAlgos.Tahometer
#skip-events = 0 | ||
Code Block | ||
| ||
[psana] files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc \ /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-2>.xtc \ ... /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-N>.xtc modules = ImgAlgos.ImgPeakFinder PrintSeparator #skip-events = 500 events = 1202010 [ImgAlgos.ImgPeakFinderAcqirisArrProducer] source = DetInfo(:Opal1000)AmoETOF.0:Acqiris.0 key_in = key_wform = peaksKeyacqiris_wform key_wtime = peaks threshold_lowacqiris_wtime fname_prefix = 20acq threshold_highprint_bits = 50 sigma7 [ImgAlgos.AcqirisAverage:bl] source = 1.5 smear_radius = 2 peak_radiusAmoETOF.0:Acqiris.0 key_in = 3 xmin = acqiris_wform #key_ave = 200 xmax = 800 ymin fname_ave_prefix = 100 ymaxacq-bline thresholds = 900 testEvent -0.005 -0.005 -0.005 -0.005 -0.005 is_positive_signal = no do_inverse_selection = 115yes skip_events = 0 proc_events = 1000 print_bits = 31 [ImgAlgos.AcqirisCalib] source = AmoETOF.0 finderIsOn:Acqiris.0 key_in = true |
- This algorithm consumes ~15 ms/event on psana0101 for full Opal1000 (1024x1024) camera image.
- Smearing algorithm use a "safety margin" which is currently set to 10 pixels (offset from each boarder of the full image size).
- Image on different stages of this algorithm:
- raw image,
- image in the window with amplitudes above the
threshold_low
- few peaks at the edges were discarded by the window limits,
- image still contains many 1-photon pixels, which need to be eliminated,
- smeared image,
- raw image with found peaks (marked by the red circles)
- zoom of the previous plot.
Example for module ImgAlgos::ImgPeakFilter
Code Block | ||
---|---|---|
| ||
[ImgAlgos.ImgPeakFilter] source acqiris_wform key_out = wf-calibrated fname_base_line = acq-bline skip_events = DetInfo(:Opal1000) key1001 proc_events = peaks1000 thresholdprint_peak = 5 threshold_total= 0 n_peaks_minbits = 10 print_bits47 [ImgAlgos.AcqirisAverage:signal] source = 11 fname = img selection_mode = SELECTION_ON |
Example for module ImgAlgos::ImgPeakFinderAB
- See Module ImgAlgos::ImgPeakFinderAB
- Configuration file example:
Code Block | ||
---|---|---|
| ||
[psana]AmoETOF.0:Acqiris.0 key_in = wf-calibrated #key_ave = fname_ave_prefix = acq-signal thresholds = -0.01 -0.01 -0.01 -0.01 -0.01 is_positive_signal = no do_inverse_selection = no skip_events files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name>.xtc modules = ImgAlgos.CameraImageProducer \ 1001 proc_events ImgAlgos.ImgPeakFinderAB events = 10 [ImgAlgos.CameraImageProducer] source = DetInfo(:Opal1000) key_in = key_out1000 print_bits = img subtract_offset = true print_bits = 1 31 [ImgAlgos.Tahometer] print_bits = 7 |
This script works with psana as follows:
- for the 1st 1000 events averages waveforms below threshold and saves results in the file acq-bline-amo01509-r0125-ave-wfs.txt;
- for the next 1000 events subtracts baseline level and averages waveforms above thresholds and saves results in the file acq-signal-amo01509-r0125-ave-wfs.txt.
This script produces three files:
acq-amo01509-r0125-config.txt - with Acqris configuration parameters:
Code Block Acqiris::ConfigV1: nbrBanks=1 channelMask=69905 nbrChannels=5 nbrConvertersPerChannel=4 horiz: sampInterval=2.5e-10 delayTime=0 nbrSegments=1 nbrSamples=10000 vert(0): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(1): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(2): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(3): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0 vert(4): fullScale=0.1 slope=1.52588e-06 offset=0 coupling=3 bandwidth=0
- acq-bline-amo01509-r0125-ave-wfs.txt - contains baseline averaged arrays, which can be presented by full scale and zoomed plots:
- acq-signal-amo01509-r0125-ave-wfs.txt- contains signal averaged arrays, which can be presented by full scale and zoomed plots:
Example for module ImgAlgos::NDArrImageProducer
See Module ImgAlgos::NDArrImageProducer
Module ImgAlgos.NDArrImageProducer produces image from any detector-associated ndarray
Possible chain of modules:
- <Package>.<Detector>NDArrProducer
- ImgAlgos.NDArrCalib
- ImgAlgos.NDArrImageProducer
- ImgAlgos.NDArrAverage
Example of the configuration file for cspad
Code Block |
---|
[psana] files = exp=cxii0114:run=227 events = 100 modules = ImgAlgos.Tahometer \ ImgPeakFinderAB] source = DetInfo(:Opal1000) key = img key_peaks_out = peaks #key_signal_out = signal-arr #hot_pix_mask_inp_file = ana-misc-exp/mask.dat #hot_pix_mask_out_file = noise-mask-out.dat #frac_noisy_evts_file = noise-frac-out.dat evt_file_out = tmp/img- rmin = 10 dr CSPadPixCoords.CSPadNDArrProducer \ = 1 SoNThr_noise ImgAlgos.NDArrCalib \ = 3 SoNThr_signal ImgAlgos.NDArrImageProducer \ = 3 frac_noisy_imgsImgAlgos.NDArrAverage [CSPadPixCoords.CSPadNDArrProducer] source = = DetInfo(CxiDs1.0:Cspad.9 peak_npix_min0) inkey = 3 peak_npix_maxoutkey = cspad_ndarr outtype 100 peak_amp_tot_thr = float is_fullsize = 0.yes peakprint_SoN_thrbits = 3 [ImgAlgos.NDArrCalib] source = DetInfo(CxiDs1.0:Cspad.0) key_in = 4. event_npeak_min = 5 event_npeak_max = 1000 event_amp_tot_thr = 0. nevents_mask_updatecspad_ndarr key_out = calibrated do_peds = yes do_cmod = yes do_stat = yes do_mask = no do_bkgd = no do_gain = no do_nrms = no do_thre = no fname_mask = fname_bkgd = masked_value = -10 threshold_nrms = 4 threshold = 7 below_thre_value = 0 nevents_mask_accumprint_bits = 50 selection_mode3 [ImgAlgos.NDArrImageProducer] source = SELECTION_ON out_file_bitsCxiDs1.0:Cspad.0 key_in = calibrated key_out 15 print_bits = cspad_img #type_out = asinp #type_out = 513 |
- Results:
Example for module ImgAlgos::ImgHitFinder
- See Module ImgAlgos::ImgHitFinder
- ImgHitFinder in regular mode needs in file with pedestals (offset) to correct the image and file with threshold.
- In amo74213 run 93 these files can be obtained directly from data, discarding signal hits as outliers using
- ImgAlgos.ImgAverage module as follows with configuration file:
Code Block | ||
---|---|---|
| ||
# File: psana-amo74213-r0093-opal-img-average.cfg [psana] #files = /reg/d/psdm/AMO/amo74213/xtc/e269-r0093-s05-c00.xtc files = exp=amo74213:run=93:xtc modules = ImgAlgos.CameraImageProducer \ float #x0_off_pix = 50 #y0_off_pix = 50 print_bits = 255 #calibdir ImgAlgos.ImgAverage skip-events = 0 events = 1000 [ImgAlgos.CameraImageProducer] = /reg/neh/home/dubrovin/LCLS/CSPadAlignment-v01/calib-cxi-ds1-2014-03-19/calib [ImgAlgos.NDArrAverage] source = DetInfo(:Opal1000)CxiDs1.0:Cspad.0) key_in = key_out cspad_img avefile = cspad-img-ave subtract_offsetrmsfile = true print_bits = 1 [ImgAlgos.ImgAverage] sourcecspad-img-rms #maskfile = cspad-img-msk #hotpixfile = cspad-img-hot thr_rms_ADU = DetInfo(:Opal1000) key0 thr_min_ADU = 4 thr_max_ADU = img avefile 65000 print_bits = img-ave-for-peds rmsfile = img-rms-for-thre evts_stage1 = 100 evts_stage2= 29 |
Example of the configuration file for cspad2x2
Code Block |
---|
[psana] # calib-dir = /reg/d/psdm/mec/meca1113/calib #calib-dir = /reg/neh/home/dubrovin/LCLS/CSPad2x2Alignment/calib-cspad2x2-01-2013-02-13/calib files = exp=meca1113:run=376 events = 10 #skip-events = 0 modules = CSPadPixCoords.CSPad2x2NDArrProducer \ ImgAlgos.NDArrImageProducer \ = 100 gate_width1 ImgAlgos.NDArrAverage [CSPadPixCoords.CSPad2x2NDArrProducer] source = 50 gate_width2MecTargetChamber.0:Cspad2x2.1 inkey = 10 print_bitsoutkey = 31 |
- Run psana using command:
Code Block | ||
---|---|---|
| ||
psana -c psana-amo74213-r0093-opal-img-average.cfg
|
- At the end of this procedure two files will be created:
- img-ave-for-peds-r0093.dat - may be used for pedestal subtraction:
- img-rms-for-thre-r0093.dat - may be used multiplied by number of rms as a threshold:
- The file with accumulated pixel hits can be obtained using configuration file:
Code Block | ||
---|---|---|
| ||
# File: psana-amo74213-r0093-opal-img-hit-finder.cfg [psana] #files = /reg/d/psdm/AMO/amo74213/xtc/e269-r0093-s05-c00.xtc files = exp=amo74213:run=93:xtc modules = ImgAlgos.CameraImageProducer \ cspad2x2_ndarr outtype = int16 print_bits = 5 [ImgAlgos.NDArrImageProducer] source = MecTargetChamber.0:Cspad2x2.1 key_in = cspad2x2_ndarr key_out ImgAlgos.ImgHitFinder \ = cspad2x2_img #type_out = asinp #type_out ImgAlgos.ImgAverage skip-events = 0 events float #x0_off_pix = 1000 [ImgAlgos.CameraImageProducer] source 50 #y0_off_pix = 50 print_bits = DetInfo(:Opal1000) key_in 255 #oname = key_outCSPAD2X2:V1 #oindex = img subtract_offset0 #pix_scale_size_um = true print_bits 218. #calibdir = 1 [ImgAlgos.ImgHitFinder] source/reg/neh/home/dubrovin/LCLS/CSPad2x2Alignment/calib-cspad2x2-01-2013-02-13/calib #calibgroup = CsPad2x2::CalibV1 [ImgAlgos.NDArrAverage] source = DetInfo(:Opal1000) key_inMecTargetChamber.0:Cspad2x2.1 #key = imgcspad2x2_ndarr key_out = cspad2x2_img_hits fname_peds avefile = imgarr-ave-for-peds-r0093.dat fname_mask rmsfile = fname_gainarr-rms maskfile = fname_thre arr-msk hotpixfile = imgarr-rms-for-thre-r0093.dat masked_value hot thr_rms_ADU = 010 thre#thr_min_mode ADU = 32 #thre_mode = 2 thre_param = 5 thre_below_value = 0 thre_above_value = 1 win_row_min = 10 win_row_max#thr_max_ADU = 20000 print_bits = 255 |
Example for module ImgAlgos::NDArrAverage
- See Module ImgAlgos::NDArrAverage andModule CSPadPixCoords::CSPadNDArrProducer
The
NDArrAverage
module in combination with CSPadNDArrProducer (or any other device NDArrProducer) can be used for evaluation of averaged pedestals or background using dedicated runs.
Typical configuration file may looks like this:No Format # Run this script: # psana -c psana-meca1113-r0045-cspad-cspad-dark-hotpix.cfg [psana] files = exp=meca1113:run=45 events = 400 #skip-events = 0 modules = CSPadPixCoords.CSPadNDArrProducer \
...
ImgAlgos.NDArrAverage
...
\
...
ImgAlgos.Tahometer [CSPadPixCoords.CSPadNDArrProducer] source = MecTargetChamber.0:Cspad.0 inkey = outkey = cspad_ndarr outtype =
...
int16
...
is_
...
fullsize =
...
yes print_bits =
...
3 [ImgAlgos.
...
NDArrAverage] source
...
= MecTargetChamber.0:Cspad.0 key =
...
cspad_ndarr avefile = cspad.0-ave rmsfile =
...
cspad.0-rms maskfile = cspad.0-msk hotpixfile =
...
cspad.0-hot thr_rms_ADU = 10 thr_min_ADU =
...
- and run it by the command:
Code Block | ||
---|---|---|
| ||
psana -c psana-amo74213-r0093-opal-img-hit-finder.cfg
|
- Which creates the file: img-sum-result-r0093.dat for
thre_mode = 2
andthre_mode = 3
, respectively: Example for module ImgAlgos::ImgSpectra
- See Module ImgAlgos::ImgSpectra
- Configuration file for psana:
...
bgColor | #F7F7ED |
---|
...
4 thr_max_ADU = 10000 print_bits = 29 #evts_stage1 = 100 #gate_width1 = 500. #evts_stage2 = 200 #gate_width2 = 100. [ImgAlgos.Tahometer] dn = 100 print_bits = 7
- Module
ImgAlgos.Tahometer
is not required in this configuration file and is added for convenience to print timing statistics for this job. - Evaluation of average intensity in 2 or 3 stages using gate-based algorithms excludes out-layers in intensity spectra and makes average more stable and reliable. However, the gate width is not an universal parameter. In order to set this parameter one has to look at spectrum of averaged intensities for particular device. The same is valid for evaluation of hot/bad pixel masks. One has to plot spectra of averaged intensity and rms values. Averaged intensity and rms spectra for exp=meca1113:run=45 are shown on plots, respectively:
Then, one has to decide how to set parameters for NDArrAverage algorithms, for example, it is quite safe to use
- thr_rms_ADU = 10 – to discard very noisy pixels,
- thr_min_ADU = 4 – to discard presumably dead pixels with 0-intensity,
- thr_max_ADU = 10000 – to discard pixels with intensity significantly exceeding average value. To be on safe side for int16 data this parameter can be set to 216-4, where 4 in both cases is just a small arbitrary number for spare safety gap.
Example for module ImgAlgos::NDArrCalib
See Module ImgAlgos::NDArrCalib, Module ImgAlgos::NDArrAverageThe
NDArrCalib
module in combination with any device NDArrProducer (for example PnccdNDArrProducer) can be used to apply intensity corrections to ndarray.
Typical configuration files are shown below.
Example of ImgAlgos::NDArrCalib for pnCCD
Code Block |
---|
[psana]
files = exp=amoa1214:run=7
#skip-events = 100
events = 5
modules = ImgAlgos.Tahometer \
ImgAlgos.PnccdNDArrProducer \
ImgAlgos.NDArrCalib \
ImgAlgos.PnccdImageProducer \
ImgAlgos.ImgSaveInFile
# ImgAlgos.NDArrAverage \
[ImgAlgos.PnccdNDArrProducer]
source = DetInfo(Camp.0:pnCCD.0)
key_in =
key_out = pnccd-ndarr
outtype = asdata
print_bits = 13
[ImgAlgos.NDArrCalib]
source = DetInfo(Camp.0:pnCCD.0)
key_in = pnccd-ndarr
key_out = calibrated
outtype = float
do_peds = yes
do_cmod = yes
do_stat = no
do_mask = no
do_bkgd = no
do_gain = no
do_nrms = no
do_thre = no
fname_mask =
fname_bkgd =
masked_value = 0
threshold_nrms = 3
threshold = 100
below_thre_value = 0
bkgd_ind_min = 0
bkgd_ind_max = 1000
bkgd_ind_inc = 10
print_bits = 255
[ImgAlgos.PnccdImageProducer]
source = DetInfo(Camp.0:pnCCD.0)
#inkey = pnccd-ndarr
inkey = calibrated
outimgkey = pnccd-img
gap_size = 20
gap_value = 0
print_bits = 1
[ImgAlgos.ImgSaveInFile]
source = DetInfo(Camp.0:pnCCD.0)
key = pnccd-img
fname = pnccd-img-from-arr
ftype = txt
saveAll = true
print_bits = 31
[ImgAlgos.Tahometer]
dn = 100
print_bits = 7 |
Example of ImgAlgos::NDArrCalib for CSPAD
Code Block |
---|
[psana]
files = exp=cxi83714:run=136
events = 100
modules = ImgAlgos.Tahometer \
CSPadPixCoords.CSPadNDArrProducer \
ImgAlgos.NDArrCalib \
ImgAlgos.NDArrAverage
[CSPadPixCoords.CSPadNDArrProducer]
source = DetInfo(CxiDs1.0:Cspad.0)
inkey =
outkey = cspad_ndarr
outtype = float
is_fullsize = yes
print_bits = 3
[ImgAlgos.NDArrCalib]
source = DetInfo(CxiDs1.0:Cspad.0)
key_in = cspad_ndarr
key_out = calibrated
outtype = double
do_peds = yes
do_cmod = yes
do_stat = yes
do_mask = no
do_bkgd = no
do_gain = no
do_nrms = no
do_thre = no
fname_mask =
fname_bkgd =
masked_value = -10
threshold_nrms = 4
threshold = 7
below_thre_value = 0
bkgd_ind_min = 0
bkgd_ind_max = 1000
bkgd_ind_inc = 10
print_bits = 3
[ImgAlgos.NDArrAverage]
source = DetInfo(CxiDs1.0:Cspad.0)
key = calibrated
avefile = cspad-ave
rmsfile = cspad-rms
#maskfile = cspad-msk
#hotpixfile = cspad-hot
thr_rms_ADU = 10
thr_min_ADU = 4
thr_max_ADU = 10000
print_bits = 29
[ImgAlgos.Tahometer]
dn = 10
print_bits = 7 |
For test purpose we use exp=cxi83714:run=136 and loop over 100 exents.
Case 1: raw, non-calibrated images
do_peds = no; 50-60 ms/event
plots for average and rms value distribution for all pixels
Case 2: images with subtracted pedestals and applied status mask
do_peds = yes; 60-70 ms/event
do_stat = yes
Case 3: The same as 2 with common mode subtracted
do_cmod = yes; 107-117 ms/event
Andy's algorithm for CSPAD common mode correction with minor adaptive modifications is applied with parameters:
/reg/d/psdm/cxi/cxi83714/calib/CsPad::CalibV1/CxiDs1.0:Cspad.0/common_mode/135-136.data
1 10 10 100 - algorithm mode, allowed peak mean, allowed peak rms, threshold on number of pixels in ADU bin.
Comparison with Andy's module cspad_mod.CsPadCalib
for common mode correction of int16_t data
Code Block |
---|
[psana]
# Default calibration directory:
# calib-dir = /reg/d/psdm/mec/cxi83714/calib
# calib-dir = /reg/neh/home1/dubrovin/LCLS/CSPadAlignment-v01/calib-mec-2013-12-10/
files = exp=cxi83714:run=136
events = 100
#skip-events = 4000
modules = cspad_mod.CsPadCalib \
CSPadPixCoords.CSPadNDArrProducer \
ImgAlgos.NDArrAverage \
ImgAlgos.Tahometer
[cspad_mod.CsPadCalib]
inputKey =
outputKey = calibrated_data
doPedestals = yes
doPixelStatus = yes
doCommonMode = yes
[CSPadPixCoords.CSPadNDArrProducer]
source = DetInfo(CxiDs1.0:Cspad.0)
inkey = calibrated_data
outkey = cspad_ndarr
outtype = float
is_fullsize = yes
print_bits = 3
[ImgAlgos.NDArrAverage]
source = DetInfo(CxiDs1.0:Cspad.0)
key = cspad_ndarr
avefile = cspad-calib-ave
rmsfile = cspad-calib-rms
#maskfile = cspad-msk
#hotpixfile = cspad-hot
thr_rms_ADU = 10
thr_min_ADU = 4
thr_max_ADU = 10000
print_bits = 29
[ImgAlgos.Tahometer]
dn = 10
print_bits = 7 |
doPedestals = yes
doCommonMode = no; 100-110ms
doPedestals = yes
doPixelStatus = yes
doCommonMode = yes; 150-160ms
Conclusion:
Results of
ImgAlgos.NDArrCalib
well reproducecspad_mod.CsPadCalib
- Common mode correction shrinks the width of averaged intensities from 0.60 to 0.54, and rms from 3.78 to 3.27.
- Algorithm is quite time expensive, it takes 30-40ms/event.
Example of ImgAlgos::NDArrCalib for Fccd960
- Calibration
To calibrate fccd960 for dark runs use command
calibman
For test purpose a couple of dark runs were processed and constants were deployed:
Code Block |
---|
Content of: /reg/d/psdm/XCS/xcsd7814/calib for detector: Fccd960
Camera::CalibV1
XcsEndstation.0:Fccd960.0
pixel_rms
12-13.data file is not used
78-81.data run range 0078 - 0081
pedestals
12-13.data file is not used
78-81.data run range 0078 - 0081
pixel_status
12-13.data file is not used
78-81.data run range 0078 - 0081 |
- Access data in psana
Example of the configuration file for psana psana-xcsd7814-r0079-fccd960-aver.cfg can be processed by the command
psana -c psana-xcsd7814-r0079-fccd960-aver.cfg
Two averaged images are saved in the text files for exp=xcsd7814:run=79 for raw and calibrated (subtracted dark level) data.
Gain bit coded gain factor 8 is applied automatically.
Example for module ImgAlgos::NDArrDropletFinder
See description in psana - Module Catalog and examples in Peak Finding Module
Example for module ImgAlgos::PixCoordsProducer
See Module ImgAlgos::PixCoordsProducer
Psana configuration file which produces enough data to get CSPAD calibrated intensity and coordinate arrays:
Code Block |
---|
[psana]
modules = ImgAlgos.PixCoordsProducer \
cspad_mod.CsPadCalib \
CSPadPixCoords.CSPadNDArrProducer
[ImgAlgos.PixCoordsProducer]
source = CxiDs1.0:Cspad.0
print_bits = 0
[cspad_mod.CsPadCalib]
source = CxiDs1.0:Cspad.0
inputKey =
outputKey = calibrated
doPedestals = yes
doPixelStatus = no
doCommonMode = no
[CSPadPixCoords.CSPadNDArrProducer]
source = CxiDs1.0:Cspad.0
inkey = calibrated
outkey = cspad_ndarr
outtype = int16
is_fullsize = yes
print_bits = 3 |
Additional keywors need to be added to the list of module parameters in order to evaluate pixel area and coordinate indexes (for image) arrays. For example:
Code Block |
---|
[ImgAlgos.PixCoordsProducer]
source = CxiDs1.0:Cspad.0
key_out_area = pix_area
key_out_mask = pix_mask
key_out_ix = pix_ix
key_out_iy = pix_iy
x0_off_pix = 1000
y0_off_pix = 1000
mask_bits = 15
print_bits = 255 |
In python code these arrays can be obtained with env.calibStore().get(...) method:
Code Block |
---|
env = ds.env()
cls = env.calibStore()
src = psana.Source('DetInfo(CxiDs1.0:Cspad.0)')
...
A = evt.get(psana.ndarray_int16_3, src, 'cspad_ndarr').flatten()
X = cls.get(psana.ndarray_float64_1, src, 'x-pix-coords')
Y = cls.get(psana.ndarray_float64_1, src, 'y-pix-coords')
Area = cls.get(psana.ndarray_float64_1, src, 'pix_area')
Mask = cls.get(psana.ndarray_int32_1, src, 'pix_mask')
iX = cls.get(psana.ndarray_uint32_1, src, 'pix_ix')
iY = cls.get(psana.ndarray_uint32_1, src, 'pix_iy')
fname= cls.get(str, src, 'geometry-fname')
// depricated method since ana-0.13.3:
path_nda = cls.get(psana.ndarray_uint8_1, src, 'geometry-calib')
path = ''.join(map(chr, path_nda)) if path_nda is not None else 'N/A' |
Their shape=(32*185*388,) = (2296960,)
These arrays can be processed by users' code directly. In particular, it is easy to conver them in 2-d image numpy array and plot it:
Code Block |
---|
import numpy as np
import matplotlib.pyplot as plt
from PSCalib.GeometryAccess import img_from_pixel_arrays
pix_size = 109.92
xmin, ymin = X.min()-pix_size/2, Y.min()-pix_size/2
iX, iY = np.array((X-xmin)/pix_size, dtype=np.uint), np.array((Y-ymin)/pix_size, dtype=np.uint)
img = img_from_pixel_arrays(iX,iY,W=A)
plt.imshow(img)
plt.draw() |
Example for module ImgAlgos::ImgAverage
- See Module ImgAlgos::ImgAverage
- The
ImgAverage
module can be used for evaluation of averaged pedestals or background using dedicated runs. Typical configuration file may looks like this:
Code Block | ||
---|---|---|
| ||
[psana]
files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name>.xtc
modules = ImgAlgos.CameraImageProducer \
ImgAlgos.ImgAverage
events = 1000
[ImgAlgos.CameraImageProducer]
source = DetInfo(:Opal1000)
key_in =
key_out = img
subtract_offset = true
print_bits = 1
[ImgAlgos.ImgAverage]
source = DetInfo(:Opal1000)
key = img
avefile = img-ave.dat
rmsfile = img-rms.dat
print_bits = 31
evts_stage1 = 100
evts_stage2 = 100
gate_width1 = 200
gate_width2 = 20
|
Example for module ImgAlgos::ImgMaskEvaluation
- See Module ImgAlgos::ImgMaskEvaluation
- Configuration parameters for psana:
Code Block | ||
---|---|---|
| ||
[ImgAlgos.ImgMaskEvaluation]
source = DetInfo(:Opal1000)
key = img
file_mask_satu = img-mask-satu.dat
file_mask_nois = img-mask-nois.dat
file_mask_comb = img-mask-comb.dat
file_frac_satu = img-frac-satu.dat
file_frac_nois = img-frac-nois.dat
thre_satu = 400
frac_satu = 0
dr = 1
thre_SoN = 3
frac_nois = 0.05
print_bits = 63
|
Note |
---|
In this example parameters were chosen in order to get a small number of "noisy" pixel just due to statistics. |
Typical image:
Plots for fraction of noisy pixels:
Plots for fraction of saturated pixels:
Masks: noisy, saturated, and combined:
Example for module ImgAlgos::ImgCalib
Code Block | ||
---|---|---|
| ||
[ImgAlgos.CameraImageProducer]
source = DetInfo(:Opal1000)
key_in =
key_out = img
subtract_offset = true
print_bits = 1
[ImgAlgos.ImgCalib]
source = DetInfo(:Opal1000)
key_in = img
key_out = calibrated
fname_peds = <pedestal-file-name>
fname_mask = <mask-file-name>
fname_bkgd =
fname_gain =
print_bits = 31
|
Example of the mask file and resulting image:
Example for module ImgAlgos::ImgRadialCorrection
See Module ImgAlgos::ImgRadialCorrection
Code Block | ||
---|---|---|
| ||
[psana]
files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc \
/reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-2>.xtc \
...
/reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-N>.xtc
skip-events = 500
events = 10
modules = cspad_mod.CsPadCalib \
# ImgAlgos.CSPadBkgdSubtract \
CSPadPixCoords.CSPadImageProducer \
ImgAlgos.ImgRadialCorrection \
ImgAlgos.ImgSaveInFile:1
[cspad_mod.CsPadCalib]
inputKey =
outputKey = calibrated
doPedestals = yes
doPixelStatus = no
doCommonMode = no
[ImgAlgos.CSPadBkgdSubtract]
source = DetInfo(CxiDs1.0:Cspad.0)
inputKey = calibrated
outputKey = bkgd_subtracted_arr
bkgd_fname = <the-file-name-with-background-array>
norm_sector = 0
print_bits = 0
[CSPadPixCoords.CSPadImageProducer]
calibDir = /reg/d/psdm/<instrument>/<experiment>/calib
typeGroupName = CsPad::CalibV1
source = CxiDs1.0:Cspad.0
key = calibrated
imgkey = current_img
#tiltIsApplied = true
[ImgAlgos.ImgRadialCorrection]
source = DetInfo(CxiDs1.0:Cspad.0)
inkey = current_img
outkey = r_cor_img
xcenter = 866
ycenter = 857
rmin = 100
rmax = 810
n_phi_bins = 60
event = 0
print_bits = 3
[ImgAlgos.ImgSaveInFile:1]
source = CxiDs1.0:Cspad.0
key = r_cor_img
fname = <file-name-for-image-array>
#saveAll = true
eventSave = 8
|
Note: the option of the background subtraction (ImgAlgos.CSPadBkgdSubtract
) is commented out in this configuration file . In order to evoke this option, the comment sign (#) should be removed from the list of modules
and the key=bkgd_subtracted_arr
should be used in CSPadPixCoords.CSPadImageProducer
.
Calibrated image and spectrum:
Calibrated and radial-corrected image, spectrum, and subtracted r-phi65 distribution for n_phi_bins
=65:
Calibrated and radial-corrected image, spectrum, and subtracted r-phi12 distribution for n_phi_bins
=12:
Example for module ImgAlgos::ImgPeakFinder
See Module ImgAlgos::ImgPeakFinder
Configuration file example:
Code Block | ||
---|---|---|
| ||
[psana]
files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc \
/reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-2>.xtc \
...
/reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-N>.xtc
modules = ImgAlgos.ImgPeakFinder PrintSeparator
#skip-events = 500
events = 120
[ImgAlgos.ImgPeakFinder]
source = DetInfo(:Opal1000)
key =
peaksKey = peaks
threshold_low = 20
threshold_high = 50
sigma = 1.5
smear_radius = 2
peak_radius = 3
xmin = 200
xmax = 800
ymin = 100
ymax = 900
testEvent = 115
print_bits = 0
finderIsOn = true
|
This algorithm consumes ~15 ms/event on psana0101 for full Opal1000 (1024x1024) camera image.
Smearing algorithm use a "safety margin" which is currently set to 10 pixels (offset from each boarder of the full image size).
Image on different stages of this algorithm:
raw image,
image in the window with amplitudes above the threshold_low
- few peaks at the edges were discarded by the window limits,
- image still contains many 1-photon pixels, which need to be eliminated,
smeared image,
raw image with found peaks (marked by the red circles)
zoom of the previous plot.
Example for module ImgAlgos::ImgPeakFilter
Code Block | ||
---|---|---|
| ||
[ImgAlgos.ImgPeakFilter]
source = DetInfo(:Opal1000)
key = peaks
threshold_peak = 5
threshold_total= 0
n_peaks_min = 10
print_bits = 11
fname = img
selection_mode = SELECTION_ON
|
Example for module ImgAlgos::ImgPeakFinderAB
See Module ImgAlgos::ImgPeakFinderAB
Configuration file example:
Code Block | ||
---|---|---|
| ||
[psana]
files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name>.xtc
modules = ImgAlgos.CameraImageProducer \
ImgAlgos.ImgPeakFinderAB
events = 10
[ImgAlgos.CameraImageProducer]
source = DetInfo(:Opal1000)
key_in =
key_out = img
subtract_offset = true
print_bits = 1
[ImgAlgos.ImgPeakFinderAB]
source = DetInfo(:Opal1000)
key = img
key_peaks_out = peaks
#key_signal_out = signal-arr
#hot_pix_mask_inp_file = ana-misc-exp/mask.dat
#hot_pix_mask_out_file = noise-mask-out.dat
#frac_noisy_evts_file = noise-frac-out.dat
evt_file_out = tmp/img-
rmin = 10
dr = 1
SoNThr_noise = 3
SoNThr_signal = 3
frac_noisy_imgs = 0.9
peak_npix_min = 3
peak_npix_max = 100
peak_amp_tot_thr = 0.
peak_SoN_thr = 4.
event_npeak_min = 5
event_npeak_max = 1000
event_amp_tot_thr = 0.
nevents_mask_update = 0
nevents_mask_accum = 50
selection_mode = SELECTION_ON
out_file_bits = 15
print_bits = 513
|
Results:
Example for module ImgAlgos::ImgHitFinder
See Module ImgAlgos::ImgHitFinder
ImgHitFinder in regular mode needs in file with pedestals (offset) to correct the image and file with threshold.
In amo74213 run 93 these files can be obtained directly from data, discarding signal hits as outliers using
ImgAlgos.ImgAverage module as follows with configuration file:
Code Block | ||
---|---|---|
| ||
# File: psana-amo74213-r0093-opal-img-average.cfg
[psana]
#files = /reg/d/psdm/AMO/amo74213/xtc/e269-r0093-s05-c00.xtc
files = exp=amo74213:run=93:xtc
modules = ImgAlgos.CameraImageProducer \
ImgAlgos.ImgAverage
skip-events = 0
events = 1000
[ImgAlgos.CameraImageProducer]
source = DetInfo(:Opal1000)
key_in =
key_out = img
subtract_offset = true
print_bits = 1
[ImgAlgos.ImgAverage]
source = DetInfo(:Opal1000)
key = img
avefile = img-ave-for-peds
rmsfile = img-rms-for-thre
evts_stage1 = 100
evts_stage2 = 100
gate_width1 = 50
gate_width2 = 10
print_bits = 31
|
Run psana using command:
Code Block | ||
---|---|---|
| ||
psana -c psana-amo74213-r0093-opal-img-average.cfg
|
At the end of this procedure two files will be created:
img-ave-for-peds-r0093.dat - may be used for pedestal subtraction:
img-rms-for-thre-r0093.dat - may be used multiplied by number of rms as a threshold:
The file with accumulated pixel hits can be obtained using configuration file:
Code Block | ||
---|---|---|
| ||
# File: psana-amo74213-r0093-opal-img-hit-finder.cfg
[psana]
#files = /reg/d/psdm/AMO/amo74213/xtc/e269-r0093-s05-c00.xtc
files = exp=amo74213:run=93:xtc
modules = ImgAlgos.CameraImageProducer \
ImgAlgos.ImgHitFinder \
ImgAlgos.ImgAverage
skip-events = 0
events = 1000
[ImgAlgos.CameraImageProducer]
source = DetInfo(:Opal1000)
key_in =
key_out = img
subtract_offset = true
print_bits = 1
[ImgAlgos.ImgHitFinder]
source = DetInfo(:Opal1000)
key_in = img
key_out = img_hits
fname_peds = img-ave-for-peds-r0093.dat
fname_mask =
fname_gain =
fname_thre = img-rms-for-thre-r0093.dat
masked_value = 0
thre_mode = 3
#thre_mode = 2
thre_param = 5
thre_below_value = 0
thre_above_value = 1
win_row_min = 10
win_row_max = 1000
win_col_min = 10
win_col_max = 1000
print_bits = 39
[ImgAlgos.ImgAverage]
source = DetInfo(:Opal1000)
key = img_hits
sumfile = img-sum-result
print_bits = 25
|
and run it by the command:
Code Block | ||
---|---|---|
| ||
psana -c psana-amo74213-r0093-opal-img-hit-finder.cfg
|
Which creates the file: img-sum-result-r0093.dat for thre_mode = 2
and thre_mode = 3
, respectively:
Example for module ImgAlgos::ImgSpectra
See Module ImgAlgos::ImgSpectra
Configuration file for psana:
Code Block | ||
---|---|---|
| ||
[psana]
files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name>.xtc
modules = ImgAlgos.CameraImageProducer \
ImgAlgos.ImgSpectra \
ImgAlgos.ImgSaveInFile:2
# ImgAlgos.ImgSaveInFile
# psana_examples.DumpOpal1k \
events = 100
[ImgAlgos.CameraImageProducer]
source = DetInfo(:Opal1000)
key_in =
key_out = img
subtract_offset = true
print_bits = 1
[ImgAlgos.ImgSpectra]
source = DetInfo(:Opal1000)
key_in = img
key_out = spectra
sig_band_rowc = 512.
ref_band_rowc = 552.
sig_band_tilt = 0.
ref_band_tilt = 0.
sig_band_width = 10
ref_band_width = 10
print_bits = 3
[ImgAlgos.ImgSpectraProc]
source = DetInfo(:Opal1000)
key_in = spectra
print_bits = 15
[ImgAlgos.ImgSaveInFile:2]
source = DetInfo(:Opal1000)
key = spectra
fname = spec-xppi0412
saveAll = true
[ImgAlgos.ImgSaveInFile]
source = DetInfo(:Opal1000)
key = img
fname = img-xppi0412
saveAll = true
|
This script can be used in order to produce text files with image and spectral array:
or graphics for several images:
Example for module ImgAlgos::ImgSpectraProc
See Module ImgAlgos::ImgSpectraProc
Configuration file for psana:
Code Block | ||
---|---|---|
| ||
[ImgAlgos.ImgSpectraProc]
source = DetInfo(:Opal1000)
key_in = spectra
print_bits = 15
|
For each event it prints something similar to:
Code Block | ||
---|---|---|
| ||
[info:ImgAlgos.ImgSpectraProc] Spectral array shape =3, 1024
[info:ImgAlgos.ImgSpectraProc] Image spectra for run=0060 Evt=000100
Column: 0 100 200 300 400 500 600 700 800 900 1000
Signal: 1211 4062 11150 17070 16406 12949 7991 5168 3968 3542 3811
Refer.: 933 3485 10425 17128 17791 13522 8315 5000 3390 2967 3193
Diff. : 0.259 0.153 0.067 -0.003 -0.081 -0.043 -0.040 0.033 0.157 0.177 0.176
[info:ImgAlgos.ImgSpectraProc] Run=0060 Evt=000100 Time=20120507-125420.982421325 done...
|
Example for module ImgAlgos::ImgSaveInFile
Code Block | ||
---|---|---|
| ||
modules = ... ImgAlgos.ImgSaveInFile:1 ... [ImgAlgos.ImgSaveInFile:1] source files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name>.xtc modules = ImgAlgos.CameraImageProducer \ ImgAlgos.ImgSpectra \ ImgAlgos.ImgSaveInFile:2 # = DetInfo(:Opal1000) # ImgAlgos.ImgSaveInFile # or CxiDs1.0:Cspad.0 key psana_examples.DumpOpal1k \ events= img fname = 100 [ImgAlgos.CameraImageProducer] sourcemy-img #ftype = DetInfo(:Opal1000) key_intxt #ftype = bin key_out#ftype = img subtract_offset = true print_bitspng ftype = 1 [ImgAlgos.ImgSpectra] source tiff #eventSave = 5 saveAll = true |
See Module ImgAlgos::ImgSaveInFile
Example for module ImgPeakFinder and ImgPeakFilter for CSPad
Module ImgAlgos::ImgPeakFinder
works on image. In order to apply this algorithm to CSPad the image should be produced. In next example the image is produced using consequtive modules cspad_mod.CsPadCalib
, ImgAlgos.CSPadMaskApply
, and CSPadPixCoords.CSPadImageProducer
:
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc \ DetInfo(:Opal1000) key_in = img key_out = spectra sig_band_rowc = 512. ref_band_rowc ... = 552. sig_band_tilt = 0. ref_band_tilt/reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-N>.xtc events = 0. sig_band_width = 10 ref_band_width1000 experiment = 10 print_bitscxii0212 calib-dir = 3ana-cxii0212/calib [ImgAlgos.ImgSpectraProc] source = DetInfo(:Opal1000) key_in = spectra print_bitsmodules = cspad_mod.CsPadCalib \ = 15 [ImgAlgos.ImgSaveInFile:2] sourceCSPadMaskApply \ = DetInfo(:Opal1000) keyCSPadPixCoords.CSPadImageProducer \ ImgAlgos.ImgPeakFinder =\ spectra fname = spec-xppi0412 saveAllImgAlgos.ImgPeakFilter \ = trueImgAlgos.ImgSaveInFile:1 [ImgAlgoscspad_mod.ImgSaveInFileCsPadCalib] source inputKey = DetInfo(:Opal1000) keyoutputKey = calibrated doPedestals = imgyes fname = img-xppi0412 saveAll = true |
- This script can be used in order to produce text files with image and spectral array:
- or graphics for several images:
Example for module ImgAlgos::ImgSpectraProc
- See Module ImgAlgos::ImgSpectraProc
- Configuration file for psana:
Code Block | ||
---|---|---|
| ||
[ImgAlgos.ImgSpectraProc] doPixelStatus = no doCommonMode = yes [ImgAlgos.CSPadMaskApply] source = DetInfo(:Opal1000) key_inCxiDs1.0:Cspad.0) inkey = calibrated outkey = spectramasked_arr printmask_bitsfname = 15 |
- For each event it prints something similar to:
Code Block | ||
---|---|---|
| ||
[info:ImgAlgos.ImgSpectraProc] Spectral array shape =3, 1024 [info:ImgAlgos.ImgSpectraProc] Image spectra for run=0060 Evt=000100 Column:<your-local-directory>/<mask-file-name>.dat masked_amp = 0 print_bits = 5 mask_control_bits = 15 [CSPadPixCoords.CSPadImageProducer] calibDir 0= /reg/d/psdm/<instrument>/<experiment>/calib typeGroupName = CsPad::CalibV1 source 100 200 = CxiDs1.0:Cspad.0 key 300 400 500= masked_arr imgkey 600 700= img print_bits 800 = 0 #tiltIsApplied 900 1000 Signal:= true [ImgAlgos.ImgPeakFinder] source 1211 4062 = 11150DetInfo(CxiDs1.0:Cspad.0) key 17070 16406 12949 = img peaksKey 7991 5168 = peaks threshold_low 3968 = 2 threshold_high = 35425 sigma 3811 Refer.: 933 = 1.5 smear_radius 3485 10425= 5 peak_radius 17128 = 7 xmin 17791 13522 8315 = 500020 xmax 3390 2967 = 31931700 Diff.ymin : 0.259 0.153 0.067 -0.003 -0.081 -0.043 -0.040 0.033 0.157 0.177 0.176 [info:ImgAlgos.ImgSpectraProc] Run=0060 Evt=000100 Time=20120507-125420.982421325 done... |
Example for module ImgAlgos::ImgSaveInFile
Code Block | ||
---|---|---|
| ||
modules = ... ImgAlgos.ImgSaveInFile:1 ... [ImgAlgos.ImgSaveInFile:1]= 20 ymax = 1700 #testEvent = 5 print_bits = 3 #finderIsOn = true [ImgAlgos.ImgPeakFilter] source = DetInfo(:Opal1000) # or CxiDs1.0:Cspad.0) key = peaks threshold_peak = 5 threshold_total= img fname0 n_peaks_min = 10 print_bits = my-img11 #ftypefname = txt #ftype cspad-img selection_mode = SELECTION_ON [ImgAlgos.ImgSaveInFile:1] source = bin #ftypeCxiDs1.0:Cspad.0 key = pngimg ftypefname = tiffcspad-img #eventSave = 51 saveAll = true |
...
Example for module ImgAlgos::
...
Example for module ImgPeakFinder and ImgPeakFilter for CSPad
CSPadArrAverage
...
Configuration file example for evaluation of pedestals:
Code Block | ||
---|---|---|
| ||
[psana] filesmodules = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc \ ImgAlgos.CSPadArrAverage files .= <path-to-the-dark-run-file>.xtc [ImgAlgos.CSPadArrAverage] source = DetInfo(CxiDs1.0:Cspad.0) key = avefile = cspad-pedestals-ave.dat rmsfile = cspad-pedestals-rms.dat print_bits = 15 evts_stage1 = 100 evts_stage2 = 100 gate_width1 = 100 gate_width2 = 10 |
Configuration file example for evaluation of background:
Code Block | ||
---|---|---|
| ||
[psana] files.. /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-N>.xtc events = 1000 experiment = cxii0212 calib-dir = ana-cxii0212/calib modules = cspad_mod.CsPadCalib \ ImgAlgos.CSPadMaskApply \ CSPadPixCoords.CSPadImageProducer \ ImgAlgos.ImgPeakFinder \ = <path-to-the-background-run-file>.xtc modules = cspad_mod.CsPadCalib ImgAlgos.ImgPeakFilter \ CSPadArrAverage skip-events = 500 events = ImgAlgos.ImgSaveInFile:11000000 [cspad_mod.CsPadCalib] inputKey = outputKey = calibrated doPedestals = yes doPixelStatus = no doCommonMode = yesno [ImgAlgos.CSPadMaskApplyCSPadArrAverage] source = DetInfo(CxiDs1.0:Cspad.0) key = calibrated avefile = cspad-background-ave.dat rmsfile = DetInfo(CxiDs1.0:cspad-background-rms.dat print_bits = 15 |
Images of the CSPad arrays for averaged and rms values, respectively, in one of the CXI runs:
Example for module ImgAlgos::CSPadBkgdSubtract
See Module ImgAlgos::CSPadBkgdSubtract
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-1>.xtc \ /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-2>.xtc \ Cspad.0) inkey ... /reg/d/psdm/<instrument>/<experiment>/xtc/<file-name-N>.xtc skip-events = calibrated500 outkeyevents = 10 modules = masked_arr mask_fname cspad_mod.CsPadCalib ImgAlgos.CSPadBkgdSubtract [cspad_mod.CsPadCalib] inputKey = <your-local-directory>/<mask-file-name>.dat masked_amp outputKey = 0 print_bitscalibrated doPedestals = yes doPixelStatus = no doCommonMode = 5 mask_control_bits = 15no [CSPadPixCoordsImgAlgos.CSPadImageProducerCSPadBkgdSubtract] calibDirsource = /reg/d/psdm/<instrument>/<experiment>/calib typeGroupName = CsPad::CalibV1 source DetInfo(CxiDs1.0:Cspad.0) inputKey = CxiDs1.0:Cspad.0 key calibrated outputKey = bkgd_subtracted bkgd_fname = masked_arr imgkey<the-file-name-with-background-array> norm_sector = 0 print_bits = img print_bits = 0 #tiltIsApplied = true [ImgAlgos.ImgPeakFinder] source3 |
The file with the background array, bkgd_fname
, was obtained by averaging 1000 events using module CSPadArrAverage. Subtraction is done with normalization for norm_sector=0
.
Event image and pixel amplitude spectrum before and after the background subtraction are shown in plots:
Other event with better subtracted background:
Example for Module ImgAlgos::CSPadMaskApply
See Module ImgAlgos::CSPadMaskApply
The array for mask contains zeros and ones for masked and passed pixels, respectively, and has a shape of full-size CSPad array 4*8*185388.
For example, it can be generated by the command
Code Block | ||
---|---|---|
| ||
./MakePixelMask.py <input-background-cspad-arr-file-name> <threshold> <output-file-name>
|
for the averaged background amplitude array <input-background-cspad-arr-file-name>
abtained as a result of ImgAlgos::CSPadArrAverage
module.
Plots show the averaged background, and the mask arrays generated from this background for three thresholds 10, 20, and 30 EDU:
The best results in filtering can be achieved in combination of modiles:
Code Block | ||
---|---|---|
| ||
modules = cspad_mod.CsPadCalib \ = DetInfo(CxiDs1.0:Cspad.0) key = img peaksKey = peaks threshold_low = 2 threshold_high = 5 sigma = 1.5 smear_radius = 5 peak_radiusImgAlgos.CSPadBkgdSubtract \ = 7 xmin = 20 xmaxImgAlgos.CSPadMaskApply \ = 1700 ymin ... [cspad_mod.CsPadCalib] inputKey = 20 ymaxoutputKey = 1700calibrated_arr #testEventdoPedestals = 5 print_bits yes doPixelStatus = 3 #finderIsOn no doCommonMode = trueno [ImgAlgos.ImgPeakFilterCSPadBkgdSubtract] source = DetInfo(CxiDs1.0:Cspad.0) key = peaks threshold_peak = 5 threshold_total= 0 n_peaks_mininputKey = 10 print_bitscalibrated_arr outputKey = 11 bkgd_subtracted_arr bkgd_fname = ana-cxi49012/cspad-cxi49012-r0025-background-ave.dat norm_sector = cspad-img0 selection_modeprint_bits = SELECTION_ON0 [ImgAlgos.ImgSaveInFile:1CSPadMaskApply] source = DetInfo(CxiDs1.0:Cspad.0) keyinkey = img fnamebkgd_subtracted_arr outkey = cspad-img #eventSave = 1 saveAllmasked_arr mask_fname = true |
Example for module ImgAlgos::CSPadArrAverage
- See Module ImgAlgos::CSPadArrAverage
- Configuration file example for evaluation of pedestals:
Code Block | ||
---|---|---|
| ||
[psana] modules = ImgAlgos.CSPadArrAverage files = <path-to-the-dark-run-file>.xtc [ImgAlgos.CSPadArrAverage] source = DetInfo(CxiDs1.0:Cspad.0) keyana-cxi49012/cspad-cxi49012-r0025-mask-40.dat masked_amp = 0 print_bits = avefile 3 mask_control_bits = 1 |
where
cspad_mod.CsPadCalib
- subtracts the pedestals
...
from raw CSPad data,
ImgAlgos.CSPadBkgdSubtract
- subtracts the background,
ImgAlgos.CSPadMaskApply
- apply the mask.
In the test with images for background represented by the water and solvent rings this filter provides the background suppression factor about 100.
The background images that still pass this filter have significantly larger intensity with respect to averaged background:
Input parameter mask_control_bits
allows to control masking regions of 2x1. For example, if all edges need to be masked, then use mask_control_bits = 15
, which gives image array like:
where red regions/lines of pixels of amplitude=8 are masked.
Example for module ImgAlgos::CSPadArrNoise
See Module ImgAlgos::CSPadArrNoise
...
Code Block | ||
---|---|---|
| ||
[psana] files = <path-to-the-background-run-file>.xtc modules = cspad_mod.CsPadCalib ImgAlgos.CSPadArrAverage skip-events = 500 events CSPadArrNoise files = 1000000 [cspad_mod.CsPadCalib] inputKey = outputKey = calibrated doPedestals = yes doPixelStatus = no doCommonMode = no [ImgAlgos.CSPadArrAverage] source = DetInfo(CxiDs1.0:Cspad.0) key= /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s00-c00.xtc \ /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s01-c00.xtc \ = calibrated avefile = cspad-background-ave.dat rmsfile = cspad-background-rms.dat print_bits = 15 |
- Images of the CSPad arrays for averaged and rms values, respectively, in one of the CXI runs:
Example for module ImgAlgos::CSPadBkgdSubtract
- See Module ImgAlgos::CSPadBkgdSubtract
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s02-c00.xtc \ /reg/d/psdm/<instrument>cxi/<experiment>cxi49012/xtc/<filee158-r0020-names03-1>c00.xtc \ /reg/d/psdm/<instrument>cxi/<experiment>cxi49012/xtc/<filee158-r0020-names04-2>c00.xtc \ ... /reg/d/psdm/<instrument>cxi/<experiment>cxi49012/xtc/<filee158-r0020-names05-N>c00.xtc skip #skip-events = 5001000 events = 10 modules = cspad_mod.CsPadCalib ImgAlgos.CSPadBkgdSubtract [cspad_mod.CsPadCalib] inputKey = outputKey = calibrated doPedestals = yes doPixelStatus = no doCommonMode = no [ImgAlgos.CSPadBkgdSubtractCSPadArrNoise] source = DetInfo(CxiDs1.0:Cspad.0) inputKeykey = calibrated outputKeystatusfile = bkgd_subtracted bkgd_fnameana-cxi49012/cspad-cxi49012-r0020-noise-status.dat maskfile = <theana-filecxi49012/cspad-namecxi49012-withr0200-background-array> norm_sectornoise-mask.dat print_bits = 255 rmin = 3 dr = 0 print_bits1 SoNThr = 3 |
- The file with the background array,
bkgd_fname
, was obtained by averaging 1000 events using module CSPadArrAverage. Subtraction is done with normalization fornorm_sector=0
. - Event image and pixel amplitude spectrum before and after the background subtraction are shown in plots:
- Other event with better subtracted background:
Example for Module ImgAlgos::CSPadMaskApply
- See Module ImgAlgos::CSPadMaskApply
- The array for mask contains zeros and ones for masked and passed pixels, respectively, and has a shape of full-size CSPad array 4*8*185388.
- For example, it can be generated by the command
Code Block | ||
---|---|---|
| ||
./MakePixelMask.py <input-background-cspad-arr-file-name> <threshold> <output-file-name>
|
- for the averaged background amplitude array
<input-background-cspad-arr-file-name>
abtained as a result ofImgAlgos::CSPadArrAverage
module. - Plots show the averaged background, and the mask arrays generated from this background for three thresholds 10, 20, and 30 EDU:
- The best results in filtering can be achieved in combination of modiles:
= 3
frac_noisy_imgs = 0.15
|
Index map in median algorithm for rmin=3, dr=1:
Code Block | ||
---|---|---|
| ||
CSPadArrNoise::printMatrixOfIndexesForMedian():
0 0 0 0 1 0 0 0 0
0 0 1 1 1 1 1 0 0
0 1 0 0 0 0 0 1 0
0 1 0 0 0 0 0 1 0
1 1 0 0 + 0 0 1 1
0 1 0 0 0 0 0 1 0
0 1 0 0 0 0 0 1 0
0 0 1 1 1 1 1 0 0
0 0 0 0 1 0 0 0 0
|
Pixel status (fraction of events where S/N > SoNThr
):
For cspad-cxi49012-r0020 with parameters from confguration file (frac_noisy_imgs=0.15
) we get, depending on number of events:
Nnoisy, Ntotal, Nnoisy/Ntotal pixels =94585 2296960 0.041
for 10 events
Nnoisy, Ntotal, Nnoisy/Ntotal pixels =2112 2296960 0.00092
for 100 events
Pixel mask for noisy pixels with |S/N| > SoNThr
:
Example for Module ImgAlgos::CSPadArrPeakFinder
See Module ImgAlgos::CSPadArrPeakFinder
Code Block | ||
---|---|---|
| ||
[psana]
files = \
/reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s00-c00.xtc \
/reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s01-c00.xtc \
/reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s02-c00.xtc \
/reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s03-c00.xtc \
# /reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s04-c00.xtc \ suddenly it became unavailable...
/reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s05-c00.xtc
#skip-events = 1000
#events = 200
modules = cspad_mod.CsPadCalib \
| ||
Code Block | ||
| ||
modules = cspad_mod.CsPadCalib \ ImgAlgos.CSPadBkgdSubtract \ ImgAlgos.CSPadMaskApply \ ... [cspad_mod.CsPadCalib] inputKey = outputKey = calibrated_arr doPedestals = yes doPixelStatus = no doCommonMode = no [ImgAlgos.CSPadBkgdSubtract] source = DetInfo(CxiDs1.0:Cspad.0) inputKey = calibrated_arr outputKey = bkgd_subtracted_arr bkgd_fname = ana-cxi49012/cspad-cxi49012-r0025-background-ave.dat norm_sector = 0 print_bits = 0 [ImgAlgos.CSPadMaskApply] source = DetInfo(CxiDs1.0:Cspad.0) inkey = bkgd_subtracted_arr outkey = masked_arr mask_fname = ana-cxi49012/cspad-cxi49012-r0025-mask-40.dat masked_amp = ImgAlgos.CSPadMaskApply 0\ print_bits = 3 mask_control_bits = 1 |
- where
cspad_mod.CsPadCalib
- subtracts the pedestals from raw CSPad data,ImgAlgos.CSPadBkgdSubtract
- subtracts the background,ImgAlgos.CSPadMaskApply
- apply the mask.- In the test with images for background represented by the water and solvent rings this filter provides the background suppression factor about 100.
- The background images that still pass this filter have significantly larger intensity with respect to averaged background:
- Input parameter
mask_control_bits
allows to control masking regions of 2x1. For example, if all edges need to be masked, then usemask_control_bits = 15
, which gives image array like: - where red regions/lines of pixels of amplitude=8 are masked.
Example for module ImgAlgos::CSPadArrNoise
- See Module ImgAlgos::CSPadArrNoise
Code Block | ||
---|---|---|
| ||
[psana] modules = cspad_mod.CsPadCalib ImgAlgos.CSPadArrNoise files = /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s00-c00.xtc \ ImgAlgos.CSPadArrPeakFinder [cspad_mod.CsPadCalib] inputKey = outputKey = calibrated doPedestals = yes doPixelStatus = no doCommonMode = no [ImgAlgos.CSPadMaskApply] source = DetInfo(CxiDs1.0:Cspad.0) inkey = calibrated outkey = masked_arr mask_fname = ana-cxi49012/cspad-cxi49012-r0150-mask-badregs.dat #mask_fname = ana-cxi49012/cspad-cxi49012-r0150-mask-bkgd.dat #mask_fname = /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s01-c00.xtc \ ana-cxi49012/cspad-cxi49012-r0150-mask-rects.dat masked_amp = 8 print_bits = /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s02-c00.xtc \ 1 mask_control_bits = 15 [ImgAlgos.CSPadArrPeakFinder] source /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s03-c00.xtc \ = DetInfo(CxiDs1.0:Cspad.0) key /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s04-c00.xtc \ = masked_arr key_peaks_out /reg/d/psdm/cxi/cxi49012/xtc/e158-r0020-s05-c00.xtc #skip-events = 1000 events = 10 [cspad_mod.CsPadCalib] inputKey= peaks hot_pix_mask_inp_file = ana-cxi49012/cspad-cxi49012-r0150-noise-mask.dat hot_pix_mask_out_file = ana-cxi49012/cspad-cxi49012-r0150-noise-mask-out.dat frac_noisy_evts_file = ana-cxi49012/cspad-cxi49012-r0150-noise-frac.dat evt_file_out = outputKeytmp/cspad-ev- rmin = calibrated doPedestals = yes doPixelStatus = no doCommonMode = no [ImgAlgos.CSPadArrNoise] source 3 dr = DetInfo(CxiDs1.0:Cspad.0) key = = calibrated1 statusfileSoNThr = ana-cxi49012/cspad-cxi49012-r0020-noise-status.dat maskfile = = ana-cxi49012/cspad-cxi49012-r0200-noise-mask.dat print_bits 3 frac_noisy_imgs = = 255 rmin0.1 peak_npix_min = = 3 dr4 peak_npix_max = 25 peak_amp_tot_thr = 1 SoNThr 100. event_npeak_min = = 3 frac_noisy_imgs10 event_amp_tot_thr = 0 1000.15 |
- Index map in median algorithm for rmin=3, dr=1:
Code Block | ||
---|---|---|
| ||
CSPadArrNoise::printMatrixOfIndexesForMedian():
0 0 0 0 1 0 0 0 0
0 0 1 1 1 1 1 0 0
0 1 0 0 0 0 0 1 0
0 1 0 0 0 0 0 1 0
1 1 0 0 + 0 0 1 1
0 1 0 0 0 0 0 1 0
0 1 0 0 0 0 0 1 0
0 0 1 1 1 1 1 0 0
0 0 0 0 1 0 0 0 0
|
- Pixel status (fraction of events where
S/N > SoNThr
): - For cspad-cxi49012-r0020 with parameters from confguration file (
frac_noisy_imgs=0.15
) we get, depending on number of events: Nnoisy, Ntotal, Nnoisy/Ntotal pixels =94585 2296960 0.041
for 10 eventsNnoisy, Ntotal, Nnoisy/Ntotal pixels =2112 2296960 0.00092
for 100 events- Pixel mask for noisy pixels with
|S/N| > SoNThr
: Example for Module ImgAlgos::CSPadArrPeakFinder
- See Module ImgAlgos::CSPadArrPeakFinder
nevents_mask_update = 100
nevents_mask_accum = 50
selection_mode = SELECTION_ON
out_file_bits = 15
print_bits = 512
|
Results:
Code Block | ||
---|---|---|
| ||
[info:TimeInterval::startTime] Start time: 2012-06-12 15:32:02
[info:ImgAlgos.CSPadArrPeakFinder] N processed events = 1000 N selected = 55 Fraction of selected = 0.055
[info:ImgAlgos.CSPadArrPeakFinder] N processed events = 2000 N selected = 62 Fraction of selected = 0.031
[info:ImgAlgos.CSPadArrPeakFinder] N processed events = 3000 N selected = 81 Fraction of selected = 0.027
[info:ImgAlgos.CSPadArrPeakFinder] N processed events = 4000 N selected = 95 Fraction of selected = 0.02375
[info:ImgAlgos.CSPadArrPeakFinder] N processed events = 5000 N selected = 150 Fraction of selected = 0.03
[info:ImgAlgos.CSPadArrPeakFinder] N processed events = 6000 N selected = 265 Fraction of selected = 0.0441667
[info:ImgAlgos.CSPadArrPeakFinder] N processed events = 7000 N selected = 404 Fraction of selected = 0.0577143
[info:ImgAlgos.CSPadArrPeakFinder] ===== JOB SUMMARY =====
[info:TimeInterval::stopTime] Time to process 7945 events is 3747.48 sec, or 0.471678 sec/event
|
Selected events
ev-007713:
ev-008944:
Next example shows how to use ImgAlgos::CSPadArrPeakFinder in combination with python module pyimgalgos.ex_peaks_nda:
Code Block | ||
---|---|---|
[psana]
#skip-events = 50
events = 10
files = exp=cxi83714:run=136
modules = cspad_mod.CsPadCalib \
| ||
Code Block | ||
| ||
[psana] files = \ /reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s00-c00.xtc \ /reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s01-c00.xtc \ /reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s02-c00.xtc \ /reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s03-c00.xtc \ # /reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s04-c00.xtc \ suddenly it became unavailable... /reg/d/psdm/cxi/cxi49012/xtc/e158-r0150-s05-c00.xtc #skip-events = 1000 #events = 200 modules = cspad_mod.CsPadCalib \ ImgAlgos.CSPadMaskApply \ ImgAlgos.CSPadArrPeakFinder [cspad_mod.CsPadCalib] inputKey = outputKey = calibrated doPedestals = yes doPixelStatus = no doCommonMode = no [ImgAlgos.CSPadMaskApply] source = DetInfo(CxiDs1.0:Cspad.0) inkey =ImgAlgos.CSPadArrPeakFinder calibrated\ outkey = masked_arr mask_fnamepyimgalgos.ex_peaks_nda # = ana-cxi49012/cspad-cxi49012-r0150-mask-badregs.dat #mask_fname EventKeys [cspad_mod.CsPadCalib] inputKey = ana-cxi49012/cspad-cxi49012-r0150-mask-bkgd.dat #mask_fname outputKey = ana-cxi49012/cspad-cxi49012-r0150-mask-rects.dat masked_amp calibrated doPedestals = 8 print_bits = 1 mask_control_bitsyes doPixelStatus = yes doCommonMode = 15yes [ImgAlgos.CSPadArrPeakFinder] source = DetInfo(CxiDs1.0:Cspad.0) keykey = calibrated key_peaks_out = masked_arr key_peaks_outnda = peaks _nda hot_pix_mask_inp_file = ana-cxi49012cxi83714/cspad-cxi49012cxi83714-r0150r0136-noise-mask-ini.dat hot_pix_mask_out_file = ana-cxi49012cxi83714/cspad-cxi49012cxi83714-r0150r0136-noise-mask-out.dat frac_noisy_evts_file = ana-cxi49012/cspad-cxi49012-r0150-noise-frac.dat evt_file_out = tmp/cspad-ev- rmin = 3 dr = 1 SoNThr = 3 frac_noisy_imgs = 0.1 peak_npix_min = 4 peak_npix_max frac_noisy_evts_file = ana-cxi83714/cspad-cxi83714-r0136-noise-frac.dat evt_file_out = 25 peak_amp_tot_thr = 100. event_npeak_min= cxi83714/cspad-ev- rmin = 10 event_amp_tot_thr = 1000. nevents_mask_update = 100 nevents_mask_accum = 50 selection_mode8 dr = SELECTION_ON out_file_bits = 15 print_bits = 512 |
- Results:
Code Block | ||
---|---|---|
| ||
[info:TimeInterval::startTime] Start time: 2012-06-12 15:32:02 [info:ImgAlgos.CSPadArrPeakFinder] 1 SoNThr_noise N processed events = 1000 N selected3 SoNThr_signal = 55 Fraction of selected = 0.055 [info:ImgAlgos.CSPadArrPeakFinder] 4 frac_noisy_imgs N= processed events = 2000 0.9 peak_npix_min N selected = 62 = Fraction of selected = 0.031 [info:ImgAlgos.CSPadArrPeakFinder]3 peak_npix_max N processed events = 3000 N selected = 81 Fraction of selected =500 peak_amp_tot_thr = 0.027 [info:ImgAlgos.CSPadArrPeakFinder] peak_SoN_thr N processed events = 4000 N selected = 95 Fraction of selected = 0.02375 [info:ImgAlgos.CSPadArrPeakFinder] N processed events = 5000 N selected = 150 Fraction of selected = 0.03 [info:ImgAlgos.CSPadArrPeakFinder] N processed events = 6000 N selected = 265 Fraction of selected = 0.0441667 [info:ImgAlgos.CSPadArrPeakFinder] N processed events = 7000 N selected = 404 Fraction of selected = 0.0577143 [info:ImgAlgos.CSPadArrPeakFinder] ===== JOB SUMMARY ===== [info:TimeInterval::stopTime] Time to process 7945 events is 3747.48 sec, or 0.471678 sec/event |
...
5.
event_npeak_min = 5
event_npeak_max = 1000
event_amp_tot_thr = 0.
nevents_mask_update = 0
nevents_mask_accum = 50
selection_mode = SELECTION_ON
out_file_bits = 15
print_bits = 3681
[pyimgalgos.ex_peaks_nda]
source = DetInfo(CxiDs1.0:Cspad.0)
key_in = peaks_nda
print_bits = 255 |
Example for module ImgAlgos::CSPadArrPeakAnalysis
See Module ImgAlgos::CSPadArrPeakAnalysis
Example of the psana configuration file:
Code Block | ||
---|---|---|
| ||
modules = cspad_mod.CsPadCalib \ ImgAlgos.CSPadMaskApply \ ImgAlgos.CSPadArrPeakFinder \ ImgAlgos.CSPadArrPeakAnalysis # ...configuration parameters of other modules... [ImgAlgos.CSPadArrPeakAnalysis] source = DetInfo(CxiDs1.0:Cspad.0) key = peaks print_bits = 7 fname_root = file.root |
After execution in psana the file.root
containing histogram(s) and ntuple(s) will be produced. Then, auxiliary script in root, running by the commend
root -q -f proc.C
produces the plots with histograms:
Example for TimeStampFilter and XtcOutputModule
This example demonstrates how to run psana with the time stamp filter and event writer in xtc file.
Both modules are available in psana library and they need only to be described in the configuration file. For example, the configuration file tstamp-filter-and-event-writer.cfg
may looks like:
Code Block | ||
---|---|---|
| ||
[psana] files = /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/e158-r0021-s00-c00.xtc \ /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/e158-r0021-s01-c00.xtc \ /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/e158-r0021-s02-c00.xtc \ /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/e158-r0021-s03-c00.xtc \ /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/e158-r0021-s04-c00.xtc \ /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/e158-r0021-s05-c00.xtc skip-events = 10 events = 100 modules = ImgAlgos.TimeStampFilter PSXtcOutput.XtcOutputModule [PSXtcOutput.XtcOutputModule] dirName = ./test_out [ImgAlgos.TimeStampFilter] tsinterval = 2012-02-02 18:17:00.409143728 / 2012-02-02 18:17:00.525853474 filterIsOn = true print_bits = 11 |
Command to run psana is:
psana -c ./tstamp-filter-and-event-writer.cfg
For this configuration file psana will skip 10 events and loop over the next 100 events from the /reg/d/psdm/<INSTRUMENT>/<experiment>/xtc/e158-r0021-s0*-c00.xtc
files and run consecutively modules = ImgAlgos.TimeStampFilter PSXtcOutput.XtcOutputModule
. Parameters of these modules are described in the bottom part of the configuration file. Module TimeStampFilter
passes events from the specified time interval and prints some useful information. Module XtcOutputModule
will write passed events in the file with auto-generated name ./test_out/e158-r0021.xtcf
.
See also: Module ImgAlgos::TimeStampFilter and PSXtcOutput::PSXtcOutput
Example for module ImgAlgos::UsdUsbEncoderFilter
Example of configuration file:
Code Block |
---|
[psana]
files = exp=amo75113:run=156
events = 10
modules = ImgAlgos.UsdUsbEncoderFilter
[ImgAlgos.UsdUsbEncoderFilter]
source = DetInfo(:USDUSB)
mode = 1
ifname = tstamp-code-in.txt
ofname = tstamp-code-out.txt
print_bits = 31 |
See also: Module ImgAlgos::UsdUsbEncoderFilter
Examples for Package pyimgalgos
Package pyimgalgos contains python modules which work with both frameworks pyana and psana.
Configuration file for pyana and/or psana should have relevant sections with parameters for [pyana]
and/or [psana]
. Alean section is ignored in each framework at run time. This is the only difference between two frameworks in the configuration file. All module descriptions are the same for two frameworks, as shown in examples below.
See description of modules in Package pyimgalgos.
Example of configuration file for CSPAD
File py-xcs72913-r0049-cspad.cfg
:
Code Block | ||
---|---|---|
| ||
# Run this script: # psana -c py-xcs72913-r0049-cspad.cfg # pyana -c py-xcs72913-r0049-cspad.cfg # # Useful commands: # psana -m EventKeys -n 5 /reg/d/psdm/xcs/xcs72913/xtc/e265-r0049-* # psana -m psana_examples.dump_cspad -n 5 exp=xcs72913:run=49 # pyana -m pyana_examples.dump_cspad -n 5 /reg/d/psdm/xcs/xcs72913/xtc/e265-r0049-* [pyana] files = /reg/d/psdm/xcs/xcs72913/xtc/e265-r0049-s00-c00.xtc /reg/d/psdm/xcs/xcs72913/xtc/e265-r0049-s04-c00.xtc /reg/d/psdm/xcs/xcs72913/xtc/e265-r0049-s05-c00.xtc num-events = 5 #skip-events = 0 #num-cpu = 1 verbose = 1 ; logging output: 0-nothing?, 1+INFO, 2+DEBUG, ... modules = pyimgalgos.tahometer pyimgalgos.cspad_arr_producer pyimgalgos.cspad_image_producer pyimgalgos.image_save_in_file [psana] files = exp=xcs72913:run=49 events = 5 #skip-events = 0 modules = pyimgalgos.tahometer pyimgalgos.cspad_arr_producer pyimgalgos.cspad_image_producer pyimgalgos.image_save_in_file verbose = 1 [pyimgalgos.tahometer] dn = 10 print_bits = 255 [pyimgalgos.cspad_arr_producer] #source = -|Cspad-* source = XcsEndstation-0|Cspad-0 data_type = double #data_type = float #data_type = unsigned #data_type = uint16 val_miss = 0 key_out = cspad_array print_bits = 1 [pyimgalgos.cspad_image_producer] calib_dir = /reg/d/psdm/xcs/xcs72913/calib/CsPad::CalibV1/XcsEndstation.0:Cspad.0/ key_in = cspad_array key_out = cspad_image print_bits = 1 # Supported output file formats tiff, gif, png, eps, jpg, jpeg, txt, npy(default), npz [pyimgalgos.image_save_in_file] key_in = cspad_image ofname = img-for-cspad.txt print_bits = 255 |
To run this script use command
psana -c py-xcs72913-r0049-cspad.cfg
or
pyana -c py-xcs72913-r0049-cspad.cfg
Example of configuration file for CSPAD2x2
File py-meca6113-r0028-cspad2x2.cfg
Code Block | ||
---|---|---|
| ||
# Run this script: # psana -c py-meca6113-r0028-cspad2x2.cfg # pyana -c py-meca6113-r0028-cspad2x2.cfg # # Useful commands: # psana -m EventKeys -n 5 /reg/d/psdm/mec/meca6113/xtc/e332-r0028-s03-c00.xtc # psana -m psana_examples.dump_cspad -n 5 exp=meca6113:run=28 # pyana -m pyana_examples.dump_cspad -n 5 /reg/d/psdm/mec/meca6113/xtc/e332-r0028-s03-c00.xtc [pyana] files = /reg/d/psdm/mec/meca6113/xtc/e332-r0028-s03-c00.xtc num-events = 5 #skip-events = 0 #num-cpu = 1 verbose = 0 ; logging output: 0-nothing?, 1+INFO, 2+DEBUG, ... modules = pyimgalgos.tahometer pyimgalgos.cspad_arr_producer pyimgalgos.cspad_image_producer pyimgalgos.image_save_in_file [psana] files = exp=meca6113:run=28 events = 5 #skip-events = 0 modules = pyimgalgos.tahometer pyimgalgos.cspad_arr_producer pyimgalgos.cspad_image_producer pyimgalgos.image_save_in_file [pyimgalgos.tahometer] dn = 10 print_bits = 255 [pyimgalgos.cspad_arr_producer] #source = -|Cspad-* source = MecTargetChamber-0|Cspad2x2-3 #data_type = double data_type = float #data_type = unsigned #data_type = uint16 #data_type = uint32 val_miss = 0 key_out = cspad2x2_array print_bits = 255 [pyimgalgos.cspad_image_producer] calib_dir = /reg/d/psdm/mec/meca6113/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/ key_in = cspad2x2_array key_out = cspad2x2_image print_bits = 1 # Supported output file formats tiff, gif, png, eps, jpg, jpeg, txt, npy(default), npz [pyimgalgos.image_save_in_file] key_in = cspad2x2_image ofname = img-for-cspad2x2.tiff print_bits = 255 |
To run this script use command
psana -c py-meca6113-r0028-cspad2x2.cfg
or
pyana -c py-meca6113-r0028-cspad2x2.cfg
References
...