Page History
Based on e-mail exchange between Mikhail, Gabriel, Jack, Faisal, Philip.
For composite detectors see EPIX10KA2M and EPIX10KAQUAD
Content
| Table of Contents |
|---|
Pictures from Gabriel's presentation
...
- sensor regular pixel size 100x100 µm²,
- shown on plot gap pixels 100x250100x225 µm² and four central pixels 250x250225x225 µm².
- See plot for composite detectors in EPIX10KA2M and EPIX10KAQUAD
...
2020-06-30 Dan and Maciej about forced gain modes
Calibration rows
Each ASIC has (176+2 rows x 192 columns), the last two rows are the calibration rows. These rows are not connected to the sensor and are constructed without a pixel/sensor interface. They will be powered just like any other pixel in the ASIC, therefore, they see similar voltages, noise, etc just like other pixels.
...
The force switch mode should be ignored. It is a debugging mode that should not be used for calibration.
Gabriel can explain how to do the calibration if needed.
Raw data
| Code Block | ||||
|---|---|---|---|---|
| ||||
Command: find_detector_runs MFX epix10ka
# mfxx32516: nruns 3-377, MfxEndstation.0:Epix10ka.0, MfxEndstation.0:Epix10ka.1
# mfxx36916: runs 1-84, MfxEndstation.0:Epix10ka.1 |
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
Camera1-AHL-H-Gain.txt Camera1-AHL-L-Gain.txt Camera1-AML-L-Gain.txt Camera1-AML-M-Gain.txt Camera1-FH-H-Gain.txt Camera1-FL-L-Gain.txt Camera1-FM-M-Gain.txt |
Archived in /reg/g/psdm/detector/gains/epix10k/2018-06-04-Camera1/
| Code Block | ||||
|---|---|---|---|---|
| ||||
Gain Offset
Mean RMS Mean RMS
-------------------------------------------------------
FL-L 1.28 0.06 0 ?
FM-M 42.43 2.00 2331 150
FH-H 128.49 6.17 2354 151
AML-L 1.26 0.06 2115 164
AML-M 42.52 1.92 2334 150
AHL-L 1.29 0.06 2119 190
AHL-H 128.72 6.03 2358 151
------------------------------------------------------- |
...
...
Control bits table
| Code Block | ||||
|---|---|---|---|---|
| ||||
#--------------------------------
# data bit 14 is moved here 1/0 for H,M/L
# / trbit 1/0 for H/M
# V / bit3 1/0 for F/A
# V / bit2 1/0 for H,M/L
# V / M mask
# V / T test gain range index
# V / / in calib files
# V V
# x111xx =28 - FH_H 0
# x011xx =12 - FM_M 1
# xx10xx = 8 - FL_L 2
# 0100xx =16 - AHL_H 3
# 0000xx = 0 - AML_M 4
# 1100xx =48 - AHL_L 5
# 1000xx =32 - AML_L 6
# 1101xx =49 - AHL_FL 7
# 1001xx =33 - AML_FL 8
#-------------------------------- |
| Data | config | asicPixelConfigArray | |||||
|---|---|---|---|---|---|---|---|
| Index | Gain mode | bit14 | trbit | bit3: ga | bit2: g | bit1: Mask | bit0: Test |
| 0 | FH_H | x | 1 | 1 | 1 | ||
| 1 | FM_M | x | 0 | 1 | 1 | ||
| 2 | FL_L | x | x | 1 | 0 | ||
| 3 | AHL_H | 0 | 1 | 0 | 0 | ||
| 4 | AML_M | 0 | 0 | 0 | 0 | ||
| 5 | AHL_L | 1 | 1 | 0 | 0 | ||
| 6 | AML_L | 1 | 0 | 0 | 0 | ||
| 7 | AHL Forced L | 1 | 1 | 0 | 1 | ||
| 8 | AML Forced L | 1 | 0 | 0 | 1 | ||
| pixel control bit array | 1<<5 =32 | 1<<4 =16 | 1<<3 =8 | 1<<2 =4 | Not used | Not used | |
Gain correction formula
corrected = (raw - pedestals)/gain
...
- https://github.com/slaclab/cac/tree/master/psana/epix10ka - scripts from Faisal
- https://pswww.slac.stanford.edu/apps/portal/index.php?exper_id=1107 - under Workflow -> Batch Processing - batch processing
- /reg/d/psdm/MFX/mfxx32516/results/abunimeh/2 - experimental and jupyter notebook scripts
- ePix10K Calibration, by Gabriel Blaj
- EPIX10KA2M and EPIX10KAQUAD
- Jungfrau and Epix10ka Calibration
...
- 2021-09-28 learn about existence of presentation 2019-10-02-ePix10K-500um-Sensor-Geometry.pdf
Overview
Content Tools