Reason for change
The updates in the alarm handler limits respond to changes in the hardware configuration as well as in the ground software. Some minor fine tuning based on the experience with the new data is also included. The proposed package version is dataMonitoring/AlarmsCfg v2r5p3v3r0p1, as opposed to the original v2r4p2.
The detailed description of the changes is in the last section.
...
The package can be rolled back to the previous version by flipping a soft link. Also note that the package is completely independent from any other package running in the pipeline and will not cause a version change of L1Proc.
CCB Jira
Details
Here is a cut and paste of all the relevant release notes.
...
v3r0p1
- Changed the upper limits on the significances of the empty bins in the FastMon eor.
v3r0p0
- Configuration files for the alarms on the CAL and ACD calibration quantities added (not yet running in the pipeline).
- Relevant jira(s): GDQMQ-216
v2r5p3
- Alarm limits on the Tracker (and in particular on Hiro's quantities) updated.
...
- The spikes_and_holes algorithm on the GTFE occupancy in fastmon eor
...
- is not allowed to produce errors anymore (only warnings).
...
- Alarms on tower hit and trigger efficiency re-enabled. Lower limits
...
- are 0.98 and 0.90 respectively. An error is issued upon limit
...
- violations.
- Relevant jira(s): GDQMQ-227
v2r5p2
...
- Lower limits on the source event rate (merit eor) set to zero, as we were
...
- having alarms occasionally firing.
- Relevant jira(s): GDQMQ-235
v2r5p1
...
- Alarms on the quantity ReconAcdPhaMips_PMT*TH1_AcdTile* in recon eor
...
- removed as the corresponding plots are undergoing a revision and redefinition
...
- process after some changes in GR.
- Relevant jira(s): GDQMQ-228
v2r5p0
...
- Exception in fastmon eor on the noisy strip of tower 3 (which has been
...
- masked) removed.
- Relevant jira(s): GDQMQ-225