Motor Configuration
Note (20 October): Ariana will talk with XPP about air-side cables for the Talbot stage
From Eric on LCLS coordinate systems:
- X=N-S
Z=E-W
Y=vertical
X+ = north
Z+ = west
Y+ = top - But, to map this out, you need to change the 'polarity' of the stage and potentially add offsets, which is a pain if we don't keep a good log of these values, so these days, we just don't care what is X or Z. Y is definitely vertical though. I hope we can fix the X/Z part once the cable management project is further along.
Task:
. Jira server SLAC National Accelerator Laboratory serverId 1b8dc293-975d-3f2d-b988-18fd9aec1546 key ECS-4030
Stage | IOC | PV | Cabling | Parameter Manager Config | Status | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Talbot Y: Micos PLS-85 #1 | ioc-mec-usrppl-ims | MEC:USR:MMS:2425 | To HDB 15 to PR60 patch panelNeed cable CA-261-805-23-C00 | MEC/PLS-85 In-Air | Operational. Check directions. | ||||||||||||||||
Talbot : Micos PLS-85 #2X: Newport UTS100PP | ioc-mec-usrpplppl-imsxps3 | MEC:USRPPL:MMSMMN:25 | To PR60 patch panel Need cable | MEC/PLS-85 In-Air | 24 | Direct in-air cabling. | Newport | Operational. Check directions. | |||||||||||||
Talbot Z: Newport UTS100PPTalbot: Newport TBD | ioc-mec-ppl-xps3 | MEC:PPL:MMN:23 | It is DB15 (not DB25) on stage side. Need cable | Direct in-air cabling. | Newport | Operational. Check directions. Newport | |||||||||||||||
East Lens GHIJ: XYZ | ioc-mec-ppl-xps3 | MEC:PPL:MMN:[17-19] | Using XPS3 #1-#3 cables, Flange B *1 - *3. | Newport | Connected and referencedOperational. 17: -SW +NE 18: -UP +DOWN 19: Slip/Stall Error Check directions. Eric's advice worked: Kill then Re-init/Home. To do:
| ||||||||||||||||
West Lens ABEF: XYZ | ioc-mec-ppl-xps3 | MEC:PPL:MMN:[20-22] | Using XPS3 #4-#6 cables, Flange B *4 - *6. | Newport | Connected and referencedOperational. 20: -S +N 21: -UP +DOWN 22: -W +E To do:
| ||||||||||||||||
VISAR Lens: XYZ | ioc-mec-ppl-xps2 | MEC:PPL:MMN:[09-11] | XPS2 #1-#3 cables come into bottom SW flange. | Newport | Operational. 9: -N +S 10: -UP +DOWN 11: -E +W | ||||||||||||||||
JJ Slit: X | ioc-mec-tc1-vt21hv-ims | MEC:TC1:MMS:[17,18] | We are using a mirror reversed pin-out of cable CA-261-802-71-C01 "JJ X-RAY AT-C8-HV SLITS". Routing is R64B to North side of target chamber via overhead cable trays. This air-side cable is 2 x DB15S (on JJ Slit side, each DB15S carries offset/gap commands and limit switch readbacks) to 4 x TT19PP). A new drawing and CAPTAR tags need to created. | XPP/JJXGap00 XPP/JJXOff00 | Running without limit switches. Need to diagnose and correct. Also 17: -N +S 18: -OPEN +CLOSE | ||||||||||||||||
JJ Slit: Y | ioc-mec-tc1-fwheels-ims | MEC:TC1:MMS:[01,02] | XPP/JJXGap00 XPP/JJXOff00 | Running without limit switches. Need to diagnose and correct. Also 01: -DOWN + UP 02: -OPEN +CLOSE |
Detector Configuration
Detector | DAQ Host | DAQ Configuration | Cabling | Status | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Epix10kaQuad0 | daq-mec-pgp02 | -i 0 -P 0x10 -R 0 -D 0x1760 | Unchanged since L-10075. | OKOperational. | |||||||||
Epix10kaQuad1 | daq-mec-pgp02 | -i 1 -P 0x20 -R 0 -D 0x1760 | Unchanged since L-10075. | OKOperational. | |||||||||
Epix10kaQuad2 | daq-mec-pgp02 | -i 2 -P 0x11 -R 0 -D 0x1760 | Unchanged since L-10075. | OKOperational. | |||||||||
Epix10kaQuad3 | daq-mec-pgp02 | -i 3 -P 0x21 -R 0 -D 0x1760 | Unchanged since L-10075. | OKOperational. | |||||||||
Zyla |
daq-mec-cam01 | -c 0 -i "MecTargetChamber/0/Zyla/0" | Triggering issues. | USB - fiber optic extender - USB via overhead cable tray dropping into R60. | Operational. Moved to daq-mec-cam01 due to problems with 10Gb DAQ connection, see
| ||||||||
Alvium | daq-mec-pgp01 | -s 036T9 04MMC -l 400000000 | TBD Direct 8m cable from R62, partially via overhead rack. Will be in target chamber (air only) for spatial overlap measurement. (one day max). Vincent has cables available. | Operational, and already removed. | |||||||||
Visar1 | daq-mec-misc01 | -i MecTargetChamber/0/StreakC7700/1 -b MEC:STREAK:01 -B IMAGE1 -n 64 -z 2818048 -f 1 -r | Unchanged since L-10075. | OKOperational. | |||||||||
Visar2 | daq-mec-misc01 | -i MecTargetChamber/0/StreakC7700/1 -b MEC:STREAK:02 -B IMAGE1 -n 64 -z 2818048 -f 1 -r | Unchanged since L-10075. | OK | XTCAV |
...
Operational. |
DAQ/AMI-2
Issue | Notes | Status | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Not needed for this experiment, defer to Run 22. | ||||||||||
AMI-2 | Run AMI-2 with:
Peregrine to create test framework, with guidance from Vincent.
|