Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Code Block |
---|
------- HPS SVT Start of Shift Checklist -------- Shifter name: Time and date: Previous Shifter: Current run: SVT module power status (ON/OFF): Write down lowest and highest values of AVDD, DVDD and V125 currents, incl e.g. module nrLowest: AVDD - 100 mA, Top, Hybrid [Lowest (mA)]3, V125 - ... [Highest: AVDD - 400 (mA)] [FPGA] [Hybrid] AVDD DVDD V125, Bottom, Hybrid 5, V125 - ... Lowest: Highest: Check high voltage setting for each module (should be 180 V) (OK?): Check SVT module temperature, write down highest and lowest temperature ( e.g. Lowest: FPGA 3, Hybrid 0, 19.2 C, Highest FPGA 5, hybridHybrid 1, should be 0): [FPGA &24.3 C Note: FPGA 5, Hybrid #]1 is Lowest [C] Highest [C]not in use and should be 0. Check temperature at the vacuum chamber input and output: [Temperature (C)] Input: Output: ECal status (e.g. Do all HV look ok? etc.): Trigger Type (e.g. Single Cluster Trigger Top): Trigger Rate: Pair Pair spectrometer magnet: [Current] [B-field] Value: Accelerator status: Beam current (nA): Beam position X,Y (um): Beam plans for the shift (Closest measurement to Pair spectrometer): SVT plans for the shift (Closest measurement to Pair spectrometer): Notes from previous shifter: |
Code Block |
---|
------- HPS SVT Hourly Shift Checklist -------- Shifter name: Current run/status: Time: SVT module power status (ON/OFF): Write down lowest and highest values of AVDD, DVDD and V125 currents, incl e.g. module nrLowest: AVDD - 100 mA, Top, Hybrid 3, V125 [Lowest (mA)]- ... [Highest: AVDD - 400 (mA)] [FPGA] [Hybrid] AVDD DVDD V125 Check high voltage setting for each module, Bottom, Hybrid 5, V125 - ... Lowest: Highest: Check SVT module temperature, write down highest and lowest temperature ( e.g. Lowest: FPGA 3, Hybrid 0, 19.2 C, Highest FPGA 5, hybridHybrid 1, should be 0): [FPGA & Hybrid #] Lowest [C] Highest [C] 24.3 C Note: FPGA 5, Hybrid 1 is not in use and should be 0. Check high voltage setting for each module: Check temperature at the vacuum chamblerchamber input and output: [Temperature (C)] Input: Output: ECal status (e.g. Do all HV look ok? etc.): Trigger Type (e.g. Single Cluster Trigger Top): Trigger Rate: Pair spectrometer magnet: [Current] [B-field] Value: Accelerator status: Beam current (nA) (Closest measurement to Pair spectrometer): Beam position X,Y (um) (Closest measurement to Pair spectrometer): Beam plans: Notes/comments: |
Code Block |
---|
------ HPS SVT Shift Summary Checklist -------
Shifter name:
Time and date:
Next Shifter:
Notes/comments:
|
...