Page History
...
The registers of SI5345-B can be set using the ClockBuilderPro Wizard software from SkyWorks
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
The following was used for ePixUHR-100kHz-v1 ASIC and allows locking of the IC
| 1/16: Design ID | 2/16: Revision | 3/16: Host Interface | 4/16: XA/XB |
|---|---|---|---|
|
|
|
|
| 5/16: Free Run | 6/16: ZDM | 7/16: Inputs | 8/16: Inputs Select |
|
|
|
|
| 9/16: Outputs | 10/16: DCO | 11/16: Planner | 12/16: DSPLL |
|
|
|
|
| 13/16: LOS | 14/16: OOF | 15/16: LOL | 16/16: Interrputs |
|
|
|
|
Saving the registers
I recommend always saving the registers as a project file (.slabtimeproj) and a .csv for programming the IC
Overview
Content Tools