...
The package can be rolled back to the previous version by flipping a soft link. Also note that the package is completely independent from any other package running in the pipeline and will not cause a version change of L1Proc.
CCB Jira
Details
v5r3p1
...
- Disabled all the new alarms on the timing in fastmon and digi eor, since they still need tuning and reference histograms.
v5r3p0
...
- Some more fine tuning of the alarm limits based on the first data taken in the new configuration (Moot key 2450).
- Limits on AcdPedPedRMSDifference* in acdpedsanalyzer relaxed.
- Limits on RPM_GainMeanDifference_TH1 in calgainsanalyzer relaxed.
- One exception removed from the trackermon (hot strip masked).
- Added exception for digi trend, Mean_TkrHitsPerEvt_TowerPlane and OutF_Normalized_TkrHits_TowerPlane, tower 0 GTFE 14.
- Limits on calpedsanalyzer CalXAdcPedPedRMSDifference_LEX1_TH1 relaxed.
- Limits on CalX_Total_NHit_TH1 (low_high_ratio) in digi and fastmon eor relaxed a little bit.
- Limits on digi eor TkrPlanesHit_TH1_Tower put separately on tower 0, for which we have a noisy strip deforming the distribution.
v5r2p1
...
- Some limits on the acd peds relaxed.
- Relevant jira(s): GDQMQ-279.
v5r2p0
...
- All the y-values alarms on digi and fastmon eor updated to the new trigger window width (14 ticks instead of 12).
- Limits relaxed on some of the timing quantities in digi and fastmon eor.
v5r1p0
...
- Channel 1983 added as an exception on the the LEX1 and LEX8 pedestal rms values (cal_eor).
- Warning max for CalXAdcPedRMS_HEX8_TH1 (y_values) in calpeds_eor moved from 3.7 to 4.0 (the margin wasn't large enough).
- Warning min for CalXAdcPedPedRMSDifference_HEX8_TH1 (y_values) in calpeds_eor moved from 0.25 to 0.15.
- Warning min for CalXAdcPedPedRMSDifference_LEX8_TH1 (y_values) in calpeds_eor moved from -1.0 to -1.5.
- Warning min for RPM_RMS_TH1 (y_values) in calgains_eor moved from 0.15 to 0.10.
- Relevant jira(s): GDQMQ-279
v5r0p1
...
- Configuration file for the error logger on the verify module implemented.
- Relevant jira(s): GDQMQ-250
v5r0p0
...
- Implement alarms on timing quantities, mostly Condition Arrival Times, in both fastmon and digi. Settings will have to be tuned when the new timing configuration in uploaded.
- First use of the reference histograms for alarms
- Add an alarm on CondSummaryWord using the reference histogram, as a test
- Relevant jira(s): GDQMQ-271
v4r11p0
...
- Configuration file for the pErrorLogger on the FastMon fully implemented.
- Relevant jira(s): GDQMQ-250