Page History

The laser test stand uses a pair of Class 3R laser sources with Class 1 fiber beam delivery to experimental equipment. If the requirements for operation (see below) are met, the system is designed to meet Class 1 safety limits.

System diagram

Image Modified

Laser sources

• 840 nm laser diode: QPhotonics QFLD-840-2SM, nominal output power 2 mW, max output power 3 mW, QFLD-840-2SMClass 3R
• 1060 nm laser diode: QPhotonics QFLD-1060-10S, nominal output power 10 mW, max output power 14 mW, QFLD-1060-10SClass 3B

Laser diodes are bonded at their outputs to fiber pigtails connected to the beam delivery path. The diodes can only be powered using the output modules listed below.

...

The laser diode pigtails are connected through adjustable fiber attenuators to the optical system (collimator, absorptive neutral density filter, and focusing lens) on the three-axis stage. The laser light is confined to a optical fiber or a sealed light-tight lens tube at every point from the laser diode to the exit of the focusing lens. The stage is enclosed in a light-tight hutch.

Required for operation

• Laser operators for this system must should review requirements for Class 1 and 3R systems in ESH Manual Chapter 10, Laser Safety; see
  • General Requirements: http://www-group.slac.stanford.edu/esh/eshmanual/references/laserReqGeneral.pdf
  • Class 2 and Class 3R Laser Operation Requirements: http://www-group.slac.stanford.edu/esh/eshmanual/references/laserReqClass2and3R.pdf
• Operators are recommended to take the ESH132 class: https://www-internal.slac.stanford.edu/esh-db/training/slaconly/bin/catalog_item.asp?course=132.
• The pulse inputs to the output modules must only be connected to the AVTech pulse generator. The DC bias inputs to the output modules will be are shorted to ground (as recommended by AVTech when not applying bias). This guarantees the laser diodes do not exceed safety operate within Class 1 limits.
• For unattended operation, the hutch must should be closed.