Page History
Table of Contents |
---|
Priorities
DAQ integration priority order determined together with Sebastien Boutet and hutch scientists
...
- cameralink
- coaxpress over fiber
- anything low-rate (<=100Hz) where it's easy to make an IOC for it (e.g with a company SDK kit we already support, like andor or alvium)
- anything with an existing IOC that supports LCLS2-timing is "free"
...
- Nov. 20, 2023 with Sebastien/James/Georgi
- Mar. 20, 2024 with Georgi/Kristjan/Dan/Chris/Dougie/DJ/Lingjia
- June 6, 2024 James, Kristjan, Silke, Georgi, Alex, Sebastien, Andy
NOTE: Any camera that is implemented as an IOC should submit a Jira ticket for the controls group with "component" set to "Imaging" (ECS Supported Devices Curation) to make sure functionality is not being duplicated. See approved list of controls-detectors here (https://confluence.slac.stanford.edu/pages/viewpage.action?pageId=326510196#SupportedDevices(SDL)-Addingadevice).
...
- (almost complete) rixccd (archon)
- needs new timestamping firmware
- (almost complete) superconducting phase-cavity BLD
- (close)
- ebeam BLD BLD
- would help if TMO/RIX scientists could push on ACR (Jeremy Mock?)
- needed for SXR XTCAV?
- small (2Mpx, 5kHz) (cancelled) small txi epixHR (beginning of 2025)
- only for tests, not in official experiments
- (complete) rix high-rate mono-encoder
- UED 1080Hz epixepix10ka
- some high-rate beam issues. not used at high rates with beam before first half of 2025
- identical to andor iXon listed below with existing timestamping IOC?
- if so can be implemented as a "pvaDetector"
- mfx jungfrau16M (a yearearly 2025)
- mfx usb alvium support (for timetool plug-in) although opal could be used
- ~120Hz
- if implemented as IOC: timetool plug-in is non-trivial? Ask Mat Bain, Matt Britton, Giacomo
- mfx epix100
- for lcls2, needs work but somewhat done
- mfx fee spectrometer support (bld and full ioc image)(standalone running complete) tmo tixel
- magnetic bottle expts could use existing detector
- would be nice to replace a dream delay-line-detector with tixel? need a larger one. not obligated to users
- higher priority than big txi epixHR could replace k-microscope delay-line detector
- rix axis sxr-60 camera (chemrix spectrometer)
- smaller pixel than epix
- can't use andor: flange-mount makes grazing-incidence difficult
- could happen before "the shutdown" (at slac end of july September 2024, but have framegrabber)
- commissioned in run 23 (oct 2024 through feb 2025)
- highest priority for new instrument for rixs experiments
- plan is to implement as an IOC (who? dan? if tid could do it that would be great)
- tmo tixel
- tmo happy with standalone running
- magnetic bottle expts could use existing detector
- would be nice to replace a dream delay-line-detector with tixel? need a larger one. not obligated to users
- higher priority than big txi epixHR
- could replace k-microscope delay-line detector
- UED EMCCD?
- same as Andor iXon
- working on an IOC (in-progress)
- if so can be implemented as a "pvaDetector"
- medium-term goal for UED
- big txi epixHR (4Mpx 35kHz, big one delayed until aug 2025)
- (done, to first order, but awaiting TID improvements) rix epixM (depends on approved experiments)
- Georgi wants to start testing in hutch in fall 2024
- epixUHR (testing and in XPP, production not until late 2026)
- Riccardo Melchiorri is working on this
- opal replacement (waiting on decision from scientists: see Opal Replacement)
- would like alvium
- rix k-microscope delay-line-detector (depends on approved experiments)
- on-hold. waiting for management approval.
- Yves/Markus should communicate with Jake Koralek
- cpo estimates 3 more months of FTE effort to integrate
- should we use the dream dld or perhaps tixel instead?
- local contact person: Jake Koralek
- priority depends on conclusions of workshop in March 2024
- perhaps users in spring 2025
- on-hold. waiting for management approval.
- epixUHR (testing and in XPP, production not until late 2026)
- Riccardo Melchiorri is working on this
- opal replacement (waiting on decision from scientists: see Opal Replacement)
- timepix
- mec varex? need to talk to mec people to set priority
- perhaps "someone" will create a timestamping IOC?
Requested Detector Features
We request that TID support the following features for custom LCLS2 detectors:
- software readout of all fiber optic powers
- software/firmware support for eye-diagram scans for all high speed links as pioneered by Julian Mendez
- when data from a multi-segment detector is transmitted on multiple pgp lanes there should be a batching-event-builder in the receiving kcu1500/c1100 to join all lanes of data together, together with a rogue "blowoff" mechanism to clear the associated FIFOs when needed
- data appears in a natural unscrambled order (e.g. pixels in an image)
- event data from detector (or detector segments) must preserve time-order (round-robin of event data across PGP lanes makes this difficult, for example)ued andor ixon (the camera used in the old daq? but maybe not)
- maybe an IOC because of long integration times
- might not be too bad if it's an andor get more information
Overview
Content Tools