Page History
Table of Contents |
---|
...
TMO IOC Commands
Run , for example, on rixtmo-daq machine as user rixoprtmoopr:
- mr3k2kb mirror: /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-rixtmo-pgpw8-01/edm-ioc-rixtmo-pgpw8-01.cmd
- mr4k2kb mirror: /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-rixtmo-pgpw8-02/edm-ioc-rixtmo-pgpw8-02.cmdchemrix
- laser: /cds/group/pcds/epics/ioc/commonlas/pgpWave8/latest/childrenR1.1.0/build/iocBoot/ioc-rixlas-ip1-pgpw8-0304/edm-ioc-las-rixip1-pgpw8-0304.cmd
...
RIX IOC Commands
Run, for example, on tmorix-daq machine as user tmoopr:as user rixopr (as of 2024/06/05):
- mr3k2:
/reg/g/pcds/epics/ioc/rix/pgpWave8/R2.3.0/build/iocBoot/ioc-rix-pgpw8-01/edm-ioc-rix-pgpw8-01.cmd
- mr4k2:
/reg/g/pcds/epics/ioc/rix/pgpWave8/R2.3.0/build/iocBoot/ioc-rix-pgpw8-02/edm-ioc-rix-pgpw8-02.cmd
- chemrix (crix):
/reg/g/pcds/epics/ioc/rix/pgpWave8/R2.3.0/build/iocBoot/ioc-rix-pgpw8-03/edm-ioc-rix-pgpw8-03.cmd
Out of date
mr3k2: /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-
...
rix-pgpw8-01/edm-ioc-
...
rix-pgpw8-01.cmdmr4k2: /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-
...
rix-pgpw8-02/edm-ioc-
...
rix-pgpw8-02.cmdchemrix: /cds/group/pcds/epics/ioc/common/pgpWave8/latest/children/build/iocBoot/ioc-rix-pgpw8-03/edm-ioc-rix-pgpw8-03.cmd
Unknown?
laser: /cds/group/pcds/epics/ioc/las/pgpWave8/R1.1.0/build/iocBoot/ioc-las-crix-pgpw8-03/edm-ioc-las-crix-pgpw8-03.cmd
TXI IOC Commands
Run on txi-control as user txiopr:
- /reg/g/pcds/epics/ioc/txi/pgpWave8/R1.0.0/build/iocBoot/ioc-txi-pgpw8-01/edm-ioc-txi-pgpw8-01.cmd
Power Cycling
When a Wave8/FIM is power cycled some constants needed to be loaded into registers that control the ADCs. As of ioc/common/pgpWave8/R1.5.0, Jan 2022, an ADC Calibration is done automatically when the corresponding IOC is restarted. There is also a "Recalibrate" button on the pgpWave8 edm screen that allows users to initiate an ADC Calibration cycle, shown here:
...
- procmgr stop rix.cnf (on machine rix-daq, as user rixopr, shutdown the DAQ)
- ssh drp-neh-cmp007 (typically from machine psdev<nodename> (determine the codename by looking at daq .cnf file)
- cd ~cpo/git/wave8/software
- source /cds/group/pcds/dist/pds/rix/scripts/setup_env.sh
- python scripts/wave8DAQ.py --start_viewer 1 --l <lane> --dev /dev/datadev_0 --pollEn 1 --startupMode 1 (the <lane> parameter should be determined by looking at the "-l" parameter is 4 (chemrix), 5 (mr4k2), or 7 (mr3k2)to the drp executable in the daq .cnf file. in the .cnf it is a bit-mask and that must be converted into a lane number for use by this command.)
- control-C (to exit)
This is sample output from the above python script, including the "AdcCalibration" step:
...
Overview
Content Tools