...

3.1.3

redhat6-x86_64-64bit-gcc44

Obtained the source from: http://xerces.apache.org/xerces-c/download.cgi

• ./configure --prefix=blah
• make
• make install

2.8.0-gl1

These are instructions for building Xerces 2.78.0-gl1 for the various OSes supported.

...

redhat7-x86_64-64bit-gcc48

add -b 64 flag to the ./runConfigure step

redhat3-i686-32bit

These instructions should be performed as the glastrm user on a machine running leopard redhat3 (bldmac02 noric05 as of this writing).

1. Obtain Xerces 2.78.0 source code from http://archiveapache.mirrors.apachehoobly.orgcom/dist/xmlxerces/xerces-c/Xerces-C_2_7_0/sourcesources/xerces-c-src_2_78_0.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/leopardredhat3-i386i686-32bit/xerces if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/leopardredhat3-i386i686-32bit/xerces
3. Unzip and Untar the file xerces-c-src_2_78_0.tar.gz
4. Change directory to xerces-c-src_2_78_0/src/xercesc
5. Edit file util/Platforms/MacOS/MacOSDefs.hpp
6. Replace lines 25-28 with

   // ---------------------------------------------------------------------------
   // MacOS runs in big endian mode (PPC) or little endian (intel).
   // ---------------------------------------------------------------------------
   // This had to be changed to work on intel Macs but is not needed with
   // xerces version 3 and up. jcv

   #if defined(_BIG_ENDIAN) || defined(LITTLE_ENDIAN_)
   #if _BIG_ENDIAN_
   #define ENDIANMODE_BIG
   #else
   #define ENDIANMODE_LITTLE
   #endif
   #else
   #define ENDIANMODE_BIG
   #endif

7. Set environment variable XERCESCROOT to /afs/slac/g/glast/ground/GLAST_EXT/leopardredhat3-i386i686-32bit/xerces/xerces-c-src_2_78_0/
8. Execute ./runConfigure -p macosx linux -n native -t native -P /afs/slac/g/glast/ground/GLAST_EXT/leopardredhat3-i386i686-32bit/xerces/2.78.0-gl1/gcc40gcc32
9. Execute make
10. Execute make install
11. Execute install_name_tool -id libxerces-c.27.dylib ../../../2.7.0-gl1/gcc40/lib/libxerces-c.27.0.dylib
12. Execute install_name_tool -id libxerces-depdom.27.dylib ../../../2.7.0-gl1/gcc40/lib/libxerces-depdom.27.0.dylib
13. Leave and erase xerces-c-src_2_8_0/src/xercesc directory

redhat4-i686-32bit

These instructions should be performed as the glastrm user on a machine running redhat4 32bit (glastlnx14 as of this writing).

1. Obtain Xerces 2.8.0 source code from http://apache.mirrors.hoobly.com/xerces/c/2/sources/xerces-c-src_2_8_0.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/xerces if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/xerces
3. Unzip and Untar the file xerces-c-src_2_8_0.tar.gz
4. Change directory to xerces-c-src_2_8_0/src/xercesc
5. Edit file util/Platforms/MacOS/MacOSDefs.hpp
6. Replace lines 25-28 with

   // ---------------------------------------------------------------------------
   // MacOS runs in big endian mode (PPC) or little endian (intel).
   // ---------------------------------------------------------------------------
   // This had to be changed to work on intel Macs but is not needed with
   // xerces version 3 and up. jcv

   #if defined(_BIG_ENDIAN) || defined(LITTLE_ENDIAN_)
   #if _BIG_ENDIAN_
   #define ENDIANMODE_BIG
   #else
   #define ENDIANMODE_LITTLE
   #endif
   #else
   #define ENDIANMODE_BIG
   #endif

7. Set environment variable XERCESCROOT to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/xerces/xerces-c-src_2_8_0/
8. Execute ./runConfigure -p linux -t native -P Execute install_name_tool -change /afs/slac/g/glast/ground/GLAST_EXT/leopardredhat4-i386i686-32bit/xerces/2.78.0-gl1/gcc40/lib/libxerces-c.27.dylib libxerces-c.27.dylib ../../../2.7.0-gl1/gcc40/lib/libxerces-depdom.27.0.dylibgcc34
9. Execute make
10. Execute make install
11. Leave and erase xerces-c-src_2_8_0/src/xercesc directory

redhat4-x86_64-64bit

These instructions should be performed as the glastrm user on a machine running redhat4 64bit (noric13 as of this writing).

1. Obtain Xerces 2.8.0 source code from http://apache.mirrors.hoobly.com/xerces/c/2/sources/xerces-c-src_2_8_0.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/xerces if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/xerces
3. Unzip and Untar the file xerces-c-src_2_8_0.tar.gz
4. Change directory to Leave and erase xerces-c-src_2_78_0/src/xercesc directory

2.7.0-gl1

These are instructions for building Xerces 2.7.0-gl1 for the various OSes supported.

...

2. Edit file util/Platforms/MacOS/MacOSDefs.hpp
3. Replace lines 25-28 with

   // ---------------------------------------------------------------------------
   // MacOS runs in big endian mode (PPC) or little endian (intel).
   // ---------------------------------------------------------------------------
   // This had to be changed to work on intel Macs but is not needed with
   // xerces version 3 and up. jcv

   #if defined(_BIG_ENDIAN) || defined(LITTLE_ENDIAN_)
   #if _BIG_ENDIAN_
   #define ENDIANMODE_BIG
   #else
   #define ENDIANMODE_LITTLE
   #endif
   #else
   #define ENDIANMODE_BIG
   #endif

4. Set environment variable XERCESCROOT to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/xerces/xerces-c-src_2_8_0/
5. Execute ./runConfigure -p linux -t native -P /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/xerces/2.8.0-gl1/gcc34
6. Execute make
7. Execute make install
8. Leave and erase xerces-c-src_2_8_0/src/xercesc directory

redhat5-i686-32bit

These instructions should be performed as the glastrm user on a machine running redhat3 redhat5 32bit (noric05 bldlnx09 as of this writing).

1. Obtain Xerces 2.8.0 source code from http://apache.mirrors.hoobly.com/xerces/c/2/sources/xerces-c-src_2_8_0.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat3redhat5-i686-32bit/xerces if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat3redhat5-i686-32bit/xerces
3. Unzip and Untar the file xerces-c-src_2_8_0.tar.gz
4. Change directory to xerces-c-src_2_8_0/src/xercesc
5. Edit file util/Platforms/MacOS/MacOSDefs.hpp
6. Replace lines 25-28 with

   // ---------------------------------------------------------------------------
   // MacOS runs in big endian mode (PPC) or little endian (intel).
   // ---------------------------------------------------------------------------
   // This had to be changed to work on intel Macs but is not needed with
   // xerces version 3 and up. jcv

   #if defined(_BIG_ENDIAN) || defined(LITTLE_ENDIAN_)
   #if _BIG_ENDIAN_
   #define ENDIANMODE_BIG
   #else
   #define ENDIANMODE_LITTLE
   #endif
   #else
   #define ENDIANMODE_BIG
   #endif

7. Set environment variable XERCESCROOT to /afs/slac/g/glast/ground/GLAST_EXT/redhat3redhat5-i686-32bit/xerces/xerces-c-src_2_8_0/
8. Execute ./runConfigure -p linux -t native -P /afs/slac/g/glast/ground/GLAST_EXT/redhat3redhat5-i686-32bit/xerces/2.8.0-gl1/gcc32gcc41
9. Execute make
10. Execute make install
11. Leave and erase xerces-c-src_2_8_0/src/xercesc directory

...

tiger-

...

i386-32bit

These instructions should be performed as the glastrm user on a machine running redhat4 32bit tiger (glastlnx14 bldmac01 as of this writing).

1. Obtain Xerces 2.8.0 source code from http://apache.mirrors.hoobly.com/xerces/c/2/sources/xerces-c-src_2_8_0.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4tiger-i686i386-32bit/xerces if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4tiger-i686i386-32bit/xerces
3. Unzip and Untar the file xerces-c-src_2_8_0.tar.gz
4. Change directory to xerces-c-src_2_8_0/src/xercesc
5. Edit file util/Platforms/MacOS/MacOSDefs.hpp
6. Replace lines 25-28 with

   // ---------------------------------------------------------------------------
   // MacOS runs in big endian mode (PPC) or little endian (intel).
   // ---------------------------------------------------------------------------
   // This had to be changed to work on intel Macs but is not needed with
   // xerces version 3 and up. jcv

   #if defined(_BIG_ENDIAN) || defined(LITTLE_ENDIAN_)
   #if _BIG_ENDIAN_
   #define ENDIANMODE_BIG
   #else
   #define ENDIANMODE_LITTLE
   #endif
   #else
   #define ENDIANMODE_BIG
   #endif

7. Set environment variable XERCESCROOT to /afs/slac/g/glast/ground/GLAST_EXT/redhat4tiger-i686i386-32bit/xerces/xerces-c-src_2_8_0/
8. Execute ./runConfigure -p linux macosx -n native -t native -P /afs/slac/g/glast/ground/GLAST_EXT/redhat4tiger-i686i386-32bit/xerces/2.8.0-gl1/gcc32gcc40
9. Execute make
10. Execute make install
11. Execute install_name_tool -id libxerces-c.28.dylib ../../../2.8.0-gl1/gcc40/lib/libxerces-c.28.0.dylib
12. Execute install_name_tool -id libxerces-depdom.28.dylib ../../../2.8.0-gl1/gcc40/lib/libxerces-depdom.28.0.dylib
13. Execute install_name_tool -change /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit/xerces/2.8.0-gl1/gcc40/lib/libxerces-c.28.dylib libxerces-c.28.dylib ../../../2.8.0-gl1/gcc40/lib/libxerces-depdom.28.0.dylib
14. Leave and erase xerces-c-src_2_8_0/src/xercesc directory

...

2.7.0-gl1

These are instructions for building Xerces 2.7.0-gl1 for the various OSes supported.

leopard-i386-32bit

These instructions should be performed as the glastrm user on a machine running redhat4 64bit leopard (noric13 bldmac02 as of this writing).

1. Obtain Xerces 2.87.0 source code from http://archive.apache.mirrors.hoobly.comorg/dist/xml/xerces/-c/Xerces-C_2_7_0/sourcessource/xerces-c-src_2_87_0.tar.gz and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4leopard-x86_64i386-64bit32bit/xerces if it doesn't already exist.
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4leopard-x86_64i386-64bit32bit/xerces
3. Unzip and Untar the file xerces-c-src_2_87_0.tar.gz
4. Change directory to xerces-c-src_2_87_0/src/xercesc
5. Edit file util/Platforms/MacOS/MacOSDefs.hpp
6. Replace lines 25-28 with

   // ---------------------------------------------------------------------------
   // MacOS runs in big endian mode (PPC) or little endian (intel).
   // ---------------------------------------------------------------------------
   // This had to be changed to work on intel Macs but is not needed with
   // xerces version 3 and up. jcv

   #if defined(_BIG_ENDIAN) || defined(LITTLE_ENDIAN_)
   #if _BIG_ENDIAN_
   #define ENDIANMODE_BIG
   #else
   #define ENDIANMODE_LITTLE
   #endif
   #else
   #define ENDIANMODE_BIG
   #endif

7. Set environment variable XERCESCROOT to /afs/slac/g/glast/ground/GLAST_EXT/redhat4leopard-x86_64i386-64bit32bit/xerces/xerces-c-src_2_87_0/
8. Execute ./runConfigure -p linux macosx -n native -t native -P /afs/slac/g/glast/ground/GLAST_EXT/redhat4leopard-x86_64i386-64bit32bit/xerces/2.87.0-gl1/gcc34gcc40
9. Execute make
10. Execute make install
11. Execute install_name_tool -id libxerces-c.27.dylib ../../../2.7.0-gl1/gcc40/lib/libxerces-c.27.0.dylib
12. Execute install_name_tool -id libxerces-depdom.27.dylib ../../../2.7.0-gl1/gcc40/lib/libxerces-depdom.27.0.dylib
13. Execute install_name_tool -change /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/xerces/2.7.0-gl1/gcc40/lib/libxerces-c.27.dylib libxerces-c.27.dylib ../../../2.7.0-gl1/gcc40/lib/libxerces-depdom.27.0.dylib
14. Leave and erase xerces-c-src_2_87_0/src/xercesc directory