...
2) verify the State Setpoints (and limits) are set to values you want - you can type them in under the Setpoints column.
---The L2 Chirp setpoint (in grey) should be set equal to the L2 Chirp readback at the lower right.
3) verify the Actuator Setpoints (and limits) are set to values you want - you can type them in under the Setpoints column whenever the FCOM column indicates it is OFF.
----You also may want to Update Act Refs ... at this point
4) ZERO ACTUATOR OFFSETS - button in top section; this sets all the LLRF timeslot offsets to zero for feedback stations L0B, L1S, L2 and L3
...