Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The MEC attenuators are controlled by IOC ioc-xrt-mecppatt-ims [ running ioc/xrt/ims/R2.2.9] . The host machine for this ioc is the RHEL5 Supermicro Atom ioc-xrt-mec-mot1 (B960 XRT R04 E39; subnet cds-lfe.pcsdn) which runs four other IOCs:

  • ioc-xrt-mec-xfls-ims
  • ioc-xrt-mecpims1-ims
  • ioc-xrt-m3h-switch
  • ioc-mec-pulsepicker-ims

serverStat does not report any additional hardware interfaces beyond ethernet.


Cann you also call out the digi/moza channels used and what else is located on that terminal server?Notes from Silke:

  • The pulse picker may be complicated: the 3 PP devices in the XRT do share some physical setup.
  • As all IOCs on that server are ethernet only, one can decide to move IOCs temporarily if needed (either move the attenuator or the pulse picker).

...

The database in ioc-xrt-m3gm3h-switch just contains links to other PVs found on the cds-lfe.pcdsn subnet:

  • HXX:XHMHXM:MMS01:*
    • IOC: ioc-xrt-hxx-hxm-pim01-ims
    • Host: ioc-xrt-rec01cds-lfe.pcsdn
  • field(XUTS, "CXI:R48:EVR:41::CTRL.SEVR" )*
    • IOC: ioc-xrt-cxi-picker
  • Acquired via pscag06
    • Hard
     
    • RTEMS
    IOCcds-lfe.pcdsn
  • field(XUTR, "CXI:R48:EVR:41:CTRL.DG0P" )
    • IOC
  • field(DSOS, "HFX:DG2:STP:01:OPEN.SEVR" )*
    • IOC: ioc-
    xcsxcx
    • xcs-stoppers
    • Host: ioc-xrt-vacuum
  • cds-lfe.pcdsn
  • field(DSO, "HFX:DG2:STP:01:OPEN" )
  • field(DSCS, "HFX:DG2:STP:01:CLOSE.SEVR" )
  • field(DSC, "HFX:DG2:STP:01:CLOSE" )
  • field(BRSS, "vaccum
  • PATT:SYS0:1:MPSBURSTCTRL.SEVR" )field(BRST, "PATT:SYS0:1:MPSBURSTCTRL" )ioc*
    • IOC: ioc-det-evg-fake, ioc-mec-evg-fake
    field(MUTC, "HXX:HXM:MMS:01:UTC" )
  • field(MSEV, "HXX:HXM:MMS:01.SEVR")
  • field(MDMV, "HXX:HXM:MMS:01.DMOV")
  • field(MRBV, "HXX:HXM:MMS:01.RBV" )
  • field(MVAL, "HXX:HXM:MMS:01.VAL" ) 
  • field(SCAN, "5 second") }

digi/moxa port information:

These IOCs make use of a digi and a moxa. Switch swh-lfe-xrt is located at B960 XRT R02 E40 B.

There is the port usage information:

  • digi-xrt-mec04
    • Location: ST IDN061
    • switch port usedswitch location: swh-lfe-xrt:4/1/22, vlan=646 [cds-lfe-pcdsn]
    • Ports 2101-2103: ioc-xrt-mec-xfls-ims
    • Ports 2104-2114: ioc-xrt-mecppatt-ims
  • digi-xrt-mec04:2104-2114

...

    • Port 2115: ioc-mec-pulsepicker-ims
    • Port 2116: ioc-xrt-mecpim1-ims

...

  • moxa-xrt-dg3-01

...

ioc-xrt-mec-xfls-imsis:

  • digi-xrt-mec04: 2101-2103

ioc-xrt-mecpims1-ims:

  • digi-xrt-mec04: 2116
  • moxa-xrt-dg3-01:4013

is:

  • digi-xrt-mec04: 2101-2103

ioc-xrt-m3h-switch:

  • NONE

ioc-mec-pulsepicker-ims:

  • moxa-xrt-dg3-01: 4014,4015
  • digi-xrt-mec04: 2115

switchtool shows the moxa and the digi on the cds-lfe-pcdsn subnet.

For moxa-xrt-dg3-01:
swh-lfe-xrt:2/1/11, vlan=646 [cds-lfe.pcdsn]

...

    • Location: ST XCS DG3 (under) - IDNO 31/32
    • switch port used: swh-lfe-xrt:2/1/11, vlan=646 [cds-lfe.pcdsn]
    • Port 4013: ioc-xrt-mecpims1-ims
    • Ports 4014,4015: ioc-mec-pulsepicker-ims

Current connections plugged into digi-xrt-mec04 (work in progress)

12345678910111213141516
IPIMB XIPIMB YIPMATTN MTTRATTN MTTRATTN MTTRATTN MTTRATTN MTTRATTN MTTRATTN MTTRATTN MTTRATTN MTTRATTN MTTRATTN MTTRPulse SelectorIPIMB Diode Box
MEC:HXM:MMS:01MEC:HXM:MMS:02MEC:HXM:MMS:03MEC:HXM:MMS:4MEC:HXM:MMS:5MEC:HXM:MMS:6MEC:HXM:MMS:7MEC:HXM:MMS:8MEC:HXM:MMS:9MEC:HXM:MMS:10MEC:HXM:MMS:11MEC:HXM:MMS:12MEC:HXM:MMS:13MEC:HXM:MMS:14MEC:HXM:MMS:15MEC:HXM:MMS:16


Current Connections plugged into moxa-xrt-dg3-01 (work in progress)

12345678910111213141516
HFX-DG3-SLIT-01 S BLD RS422HFX-DG3-SLIT-01 N BLD RS422HFX-DG3-SLIT-01 TOP BLD RS422HFX-DG3-SLIT-01 BOT BLD RS422HFX-DG3-IPM-01 VRT DIODE RS422HFX-DG3-IPM-01 HRZ DIODE RS422HFX-DG3-IPM-01 FOIL TRNS RS422HFX-DG3-IPM-01 YAG TRNS RS422


HFX-DG3-MCC-01-MTR4 SERhave photohave photohave photo