Page History

...

• Spectrum is shown for events 1,11,21,31, and 41, respectively.
• The gain correction factor is set to "0" for bad pixels. This explains the one-bin peak at "0" amplitude.

Run 900, trans.=0.02

• Spectrum is shown for events 1,11,21,31, and 41, respectively.
• Fit is not applied because peaks are not distinguished

Image Added Image Added Image Added Image Added Image Added

Run 900, trans.=0.02 WITHOUT GAIN CORRECTION:

Image Added Image Added Image Added Image Added Image Added

Conclusion

• Gain factors have the RMS spread ~5-10% depending on high/low-gain mode and intensity of illumination
• There is no significant improvements of the amplitude spectrum after the gain correction is applied