Page History
...
Code Block |
---|
pslogin ~ > xtcsummary.py
|
lists all detector and epics information found in Configure and L1Accept (event data) sections, and lists number of events per calibration cycle. Can be helpful when putting together your myana or pyana analysis script. Example output.
...
- Front end enclosure Gas detector
Gives you the shot energy to the arrayCode Block int getFeeGasDet (double* shotEnergy);
shotEnergy4
.
- Electron beam monitor
Gives electron beam values for each of these doubles. The measured charge of the beam (in nC),Code Block int getEBeam(double& charge, double& energy, double& posx, double& posy, double& angx, double& angy); int getEBeam(double& charge, double& energy, double& posx, double& posy, double& angx, double& angy, double& pkcurr);
the measured energy of the beam (in MeV), the 2D position of the beam (in mm) away from the origin
(nominal beam position), and 2D angular position (in mrad) off the assumed direction. and the
pkcurr = current? in (Amps)
...
Overview
Content Tools