...
The configuration application has the capability to:v
- Configure existing feedback loops
- Configure individual actuator devices used by a transverse feedback loop
- Configure the measurement devices used by a transverse feedback loop
- Configure the states maintained by a transverse feedback loop
- Initialize a system matrix and possibly a gain matrix for a feedback loop as required by the individual feedback loop
- Allow the user to collect, edit, store, and load a reference orbit for each feedback loop.
- Choose the transverse feedback algorithms, from a set of possible algorithms
- Configure the timing patterns on which the feedback loop will collect data
- Allow the user to initialize feedback operating limits for each of the devices and states used by a feedback loop.
Configure Measurements
On initialization, the measurements tab will be populated with the data(PVs) read from the feedback controller IOC. The user shall be able to select the desired measurement devices and edit the dispersion and alarm limits by clicking on the appropriate cells in the table shown in the figure below. In addition, the user can get the limits from the devices also, by pressing the “Get Limits from Device” button and get the dispersion from Model DB by pressing the “Get DISPR from Model DB”.
...