Page History

...

These are instructions for building APE 2.6 for the various supported OSes.

redhat5-i686-64bit-gcc41

These instructions should be performed as the glastrm user on a machine running rhel5 in 64bit mode (noric15 as of this writing).

1. Obtain APE 2.6 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/ape if it doesn't already exist
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/ape
3. Unzip and Untar the file ape-2.6-src.tar.gz
4. Change directory to ape-2.6
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/ape/2.6/gcc41
6. Execute make
7. Execute make install
8. Leave and erase the ape-2.6 directory

redhat5-i686-32bit-gcc41

These instructions should be performed as the glastrm user on a machine running rhel5 in 32bit mode (bldlnx09 as of this writing).

1. Obtain APE 2.6 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/ape if it doesn't already exist
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/ape
3. Unzip and Untar the file ape-2.6-src.tar.gz
4. Change directory to ape-2.6
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/ape/2.6/gcc41
6. Execute make
7. Execute make install
8. Leave and erase the ape-2.6 directory

redhat4-x86_64-64bit-gcc34

These instructions should be performed as the glastrm user on a machine running rhel4 in 64bit mode (noric14 as of this writing).

...

1. Obtain APE 2.6 source code from James Peachey or from /afs/slac/g/glast/ground/GLAST_EXT/srcExtLibs and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/ape if it doesn't already exist
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/ape
3. Unzip and Untar the file ape-2.6-src.tar.gz
4. Change directory to ape-2.6
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/ape/2.6/gcc34
6. Execute make
7. Execute make install
8. Leave and erase the ape-2.6 directory

tiger-i386-32bit-gcc40

These instructions should be performed as the glastrm user on a machine running tiger in 32bit mode (bldmac01 as of this writing).

...

These are instructions for building APE 2.5.3 for the various supported OSes.

redhat5-i686-64bit

These instructions should be performed as the glastrm user on a machine running rhel5 in 64bit mode (noric15 as of this writing).

1. Obtain APE 2.5.3 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit/ape if it doesn't already exist
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit/ape
3. Unzip and Untar the file ape-2.5.3-src.tar.gz
4. Change directory to ape-2.5.3
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit/ape/2.5.3/gcc41
6. Execute make
7. Execute make install
8. Leave and erase the ape-2.5.3 directory

redhat5-i686-32bit

These instructions should be performed as the glastrm user on a machine running rhel5 in 32bit mode (bldlnx09 as of this writing).

...

1. Obtain APE 2.5.3 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape if it doesn't already exist
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape
3. Unzip and Untar the file ape-2.5.3-src.tar.gz
4. Change directory to ape-2.5.3
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape/2.5.3/gcc34
6. Execute make
7. Execute make install
8. Leave and erase the ape-2.5.3 directory

redhat4-x86_64-64bit

These instructions should be performed as the glastrm user on a machine running rhel4 in 64bit mode (noric14 as of this writing).

...

1. Obtain APE 2.5.3 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape if it doesn't already exist
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape
3. Unzip and Untar the file ape-2.5.3-src.tar.gz
4. Change directory to ape-2.5.3
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape/2.5.3/gcc40
6. Execute make
7. Execute make install
8. Leave and erase the ape-2.5.3 directory

tiger-i386-32bit

These instructions should be performed as the glastrm user on a machine running tiger in 32bit mode (bldmac01 as of this writing).

...

These are instructions for building APE 2.5.1 for the various supported OSes.

redhat5-i686-32bit

These instructions should be performed as the glastrm user on a machine running rhel5 in 32bit mode (bldlnx09 as of this writing).

...

1. Obtain APE 2.5.1 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape if it doesn't already exist
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape
3. Unzip and Untar the file ape-2.5.1-src.tar.gz
4. Change directory to ape-2.5.1
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape/2.5.1/gcc34
6. Execute make
7. Execute make install
8. Leave and erase the ape-2.5.1 directory

redhat4-x86_64-64bit

These instructions should be performed as the glastrm user on a machine running rhel4 in 64bit mode (noric13 as of this writing).

...

1. Obtain APE 2.5.1 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape if it doesn't already exist
2. Change directory to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape
3. Unzip and Untar the file ape-2.5.1-src.tar.gz
4. Change directory to ape-2.5.1
5. Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape/2.5.1/gcc40
6. Execute make
7. Execute make install
8. Leave and erase the ape-2.5.1 directory

tiger-i386-32bit

These instructions should be performed as the glastrm user on a machine running tiger in 32bit mode (bldmac01 as of this writing).

...