...
These are instructions for building APE 2.6 for the various supported OSes.
redhat5-i686-
...
64bit
These instructions should be performed as the glastrm user on a machine running rhel5 in 32bit 64bit mode (bldlnx09 noric15 as of this writing).
- Obtain APE 2.6 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686x86_64-32bit64bit-gcc41/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686x86_64-32bit64bit-gcc41/ape
- Unzip and Untar the file ape-2.6-src.tar.gz
- Change directory to ape-2.6
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686x86_64-32bit64bit-gcc41/ape/2.6/gcc41
- Execute make
- Execute make install
- Leave and erase the ape-2.6 directory
...
redhat5-
...
i686-
...
32bit
These instructions should be performed as the glastrm user on a machine running rhel4 rhel5 in 64bit 32bit mode (noric14 bldlnx09 as of this writing).
- Obtain APE 2.6 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bitredhat5-i686-32bit-gcc41/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bitredhat5-i686-32bit-gcc41/ape
- Unzip and Untar the file ape-2.6-src.tar.gz
- Change directory to ape-2.6
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bitredhat5-i686-32bit-gcc41/ape/2.6/gcc34gcc41
- Execute make
- Execute make install
- Leave and erase the ape-2.6 directory
...
redhat4-
...
x86_64-64bit
These instructions should be performed as the glastrm user on a machine running rhel4 in 64bit mode (noric14 as of this writing).
- Obtain APE 2.6 source code from James Peachey and save to Obtain the source from James Peachey or from /afs/slac/g/glast/ground/GLAST_EXT/srcExtLibs
- Unzip and Untar
- Create bin and lib directories - otherwise the resulting binaries will not be stored in the appropriate directories and will be written under the vc7 or vc8 directory.
- Open the vc7 sln solution file in Microsoft Visual C++ 7.1 or open vc8 solution file for Visual Studio 9
- Set to Release mode
- Set Multi-threaded for all libraries and executables
- Build the solution resulting in the apelib and associated applications
- Create a new zip file containing bin, doc, include, and lib
...
- redhat4-x86_64-64bit/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/ape
- Unzip and Untar the file ape-2.6-src.tar.gz
- Change directory to ape-2.6
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/ape/2.6/gcc34
- Execute make
- Execute make install
- Leave and erase the ape-2.6 directory
Windows-i386-32bit
- Obtain the source from James Peachey or from /afs/slac/g/glast/ground/GLAST_EXT/srcExtLibs
- Unzip and Untar
- Create bin and lib directories - otherwise the resulting binaries will not be stored in the appropriate directories and will be written under the vc7 or vc8 directory.
- Open the vc7 sln solution file in Microsoft Visual C++ 7.1 or open vc8 solution file for Visual Studio 9
- Set to Release mode
- Set Multi-threaded for all libraries and executables
- Build the solution resulting in the apelib and associated applications
- Create a new zip file containing bin, doc, include, and lib
redhat4-i686-32bit-gcc34
These instructions should be performed as the glastrm user on a machine running rhel4 in 32bit mode (noric09 as of this writing).
- Obtain APE 2.6 source code from James Peachey or from /afs/slac/g/glast/ground/GLAST_EXT/srcExtLibs and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/ape
- Unzip and Untar the file ape-2.6-src.tar.gz
- Change directory to ape-2.6
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/ape/2.6/gcc34
- Execute make
- Execute make install
- Leave and erase the ape-2.6 directory
tiger-i386-32bit
These instructions should be performed as the glastrm user on a machine running rhel4 tiger in 32bit mode (noric09 bldmac01 as of this writing).
- Obtain APE 2.6 source code from James Peachey or from /afs/slac/g/glast/ground/GLAST_EXT/srcExtLibs and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4tiger-i686i386-32bit-gcc34gcc40/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4tiger-i686i386-32bit-gcc34gcc40/ape
- Unzip and Untar the file ape-2.6-src.tar.gz
- Change directory to ape-2.6
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4tiger-i686i386-32bit-gcc34gcc40/ape/2.6/gcc34gcc40
- Execute make
- Execute make install
- Leave and erase the ape-2.6 directory
...
These are instructions for building APE 2.5.3 for the various supported OSes.
redhat5-i686-64bit
These instructions should be performed as the glastrm user on a machine running rhel5 in 64bit mode (noric15 as of this writing).
...
- Obtain APE 2.5.3 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape
- Unzip and Untar the file ape-2.5.3-src.tar.gz
- Change directory to ape-2.5.3
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape/2.5.3/gcc40
- Execute make
- Execute make install
- Leave and erase the ape-2.5.3 directory
tiger-i386-32bit
These instructions should be performed as the glastrm user on a machine running tiger in 32bit mode (bldmac01 as of this writing).
...
- Obtain APE 2.5.1 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape
- Unzip and Untar the file ape-2.5.1-src.tar.gz
- Change directory to ape-2.5.1
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape/2.5.1/gcc40
- Execute make
- Execute make install
- Leave and erase the ape-2.5.1 directory
tiger-i386-32bit
These instructions should be performed as the glastrm user on a machine running tiger in 32bit mode (bldmac01 as of this writing).
...