Page History

...

• want to know about small data POC.  Patrick and Jyoti will be the day-to-day POCs, then Vincent/Silke for larger feature-requests
• support for continuous beam with integrating detector: run 39 in the user-experiment is 8kHz, 25 shot offset
• psplot_live integrate into small data tools?
• 3 second delay in scans (commands below)
• trigger backgrounds on 929kHz+destination triggers for TTFEX backgrounds in DAQ
• want to keep xpm0 laser event codes the same but change the rate (requires discussion with matt+laser_group)
• may be more encoders in the future (rix needs to validation existing fast-relative and slow-interpolating-absolute encoder data)
• had a problem with burst patterns starting on wrong bucket and not matching the laser.  matt said that will be fixed, but there may be patterns that require different start buckets.  if so some automation to move the laser patterns
• ami: weirdness with opal.  signal disappears.  long latency has been observed.  but Matt Bain said that the latency number in the ami window remained small when this happened.  feels like we got old data with incorrect timestamps.  happened quite a bit.  could be an ami software problem. possible flowcharts:
  • /cds/home/opr/rixopr/scripts/flowcharts/ATM_piranah_2_5kHz_goose.fc, /cds/home/opr/rixopr/scripts/flowcharts/ATM_piranha_500Hz_goose_Matt.fc, /cds/home/opr/rixopr/scripts/flowcharts/ATM_piranha_8kHz_goose_good.fc