...
| Issue | Person | Priority | Status | Notes |
|---|---|---|---|---|
DAQ should save an HDF5 file at the end of each step per camera | Sharon | High | TESTING | Seems to be working, doing more testing DAN updated |
Load/clear config buttons don't work | Sharon | Low | DONE | |
Warning: Unable to save App Designer app object. Save not supported for matlab.apps.AppBase objects. | Sharon | Low | DONE | Seems to be harmless I just suppressed the warnings |
| DAQ crashes and takes down the whole SIOC when total number of shots exceeds 2200 (no streaming, try with streaming on) | Reproduced this with PM03 Has to be more than 5 cameras | |||
| Background not being saved | Sharon | High | DONE | |
| Implement HDF5 file saving for images | Sharon | High | DONE | |
| N/A | ||||
| Calculate how much space on disk is required | High | |||
| Install 10G switch and NAS in S10 | Arjun, Charley | High | PlanningDONE | |
| Check what happens if new DAQ is started before old one is finished (failed abort) | High | |||
| Fix binning and ROI for CMOS cameras | Medium | |||
| Can't get magnet values on first DAQ? | Medium | |||
| Check that the beam rate is not equal zero if rate set to "BEAM" | Spencer | Medium | ||
| Fix "Use_PV" functionality. | Sharon | Medium | DONE | |
| Fix camera triggers if DAQ fails. | Sharon | High | DONE | |
| "Fix cameras" button disabled if DAQ hasnt run yet | Sharon | Medium | DONE | |
| "Fix cameras" button should use default values? - yes | Sharon | Medium | DONE | |
| Timestamping fails on certain ROI settings? | Spencer | High | DONE | |
| Upgrade all machines in S20 to 10G connection | Spencer | Medium | DONE | |
| Camera binning messes up pulse ID finding | Spencer | Medium | DONE |
...
| Issue | Person | Priority | Status |
|---|---|---|---|
| Adding UV Vis Spectrometer | Sharon | High | In Progress |
| Add no-camera DAQ | Zack | Medium | |
| Add SCP Buff Acq | Zack | Medium | |
| Support 5-10 cameras (E320 request) | |||
| (Maybe) a feature where if a camera goes down, the rest of the DAQ continues without it | |||
Follow up to the request above: Print a "match matrix" at the end that shows matches between cameras instead of just total matches across all cameras (useful if one camera goes down but the rest of the cameras have good matches) | |||
| Add check/remove bad PVs and notify user in an obvious way | Sharon | ||
| Add nonBSA arrays so we can get UV spectrometer (Claudio request) | Sharon | High | DONE |
| DAQ Monitor GUI | Sharon | High | DONE |
| Find a way to globally trigger a modifier bit (e.g. "DUMP_2_9"). | David | ||
| Scan function that pauses until you click 'ok' | |||
| Generate "camera config" file including trigger info and add a save/restore button. Monitor if this finished ok or not. | Sharon | ||
| Load/Save Config files. Default config files. | Claire | ||
| Robustness issues. . . | Spencer | High | In progress |
| DAN features | Sharon | ||
| Documentation/commenting | Spencer | High | In progress |
| Fix "Use_PV" functionality. | Sharon | Medium | DONE |
...